The No. 529 Boomslang Hard Case is named after the Sub-Saharan Snake and will protect the contents stored inside with the same effectiveness. Ok, maybe it doesn't have life-threatening Venom, but it is independently tested, assured and certified by Intertek to be Waterproof, safe from Impacts and Crushing, as well as protected from Extreme Temperatures ranging from -40°C to 90°C. With several layers of Eggbox, Protective and Pick n' Pluck foam inside, you can depend on the Boomslang to protect any sensitive or delicate equipment inside.

This is an Aluminium constructed Muzzle Device that is designed for AK Platform replicas, but will fit and work with any Airsoft Gun that has a 14mm CCW Threaded [Male] Outer Barrel, which is 95% of replicas.

The Ironclad is a wide and deep Hard Case made from seriously strong Polypropylene (PP) + Glass Fibre filled with four layers of Pick and Pluck Foam, so that you can customise it to suit your needs perfectly. With a Water and Dustproof seal, IP67 Waterproof Rating, Crush and Impact protection as well as Extreme Temperature performance and a Pressure Equaliser Valve, this is the best way to protect important items during transit and storage.

The Terrapin Shockproof Instrument Case from PARRA is a seriously well-constructed Hard Case made from Polypropylene (PP) + Glass Fibre material that makes it Impact Resistant, with a Waterproof Seal that protects it from 1m submersion for 30 minutes, as well as Dust, Shock and Pressure. The hinges are supported by Stainless Steel Pins, and the compact design allows them to be easily stacked together, making it the ultimate travel accessory for those who carry sensitive equipment with them.

A lightweight, warm and comfortable Mid-Layer Jacket for Airsoft or other Outdoor/Hiking uses, that is made with a combination of Grid Fleece and Softshell material. The Grid Fleece core keeps your body warm, whilst remaining breathable, whereas the Softshell material offers some Water Resistance for when the rain hits. Whether you need a walking jacket or you want to make this part of your Airsoft loadout, the Highlander Tactical Hirta Hybrid will do you proud.

If you're looking for a plate carrier designed to be as low-profile as possible, the WETAC Spirit Low-Vis Plate Carrier Vest is calling your name! This plate carrier is based on a well-known real steel carrier intended for vehicle-borne operations and other applications which require concealability and agility. Despite its compact design, the Spirit Low-Vis Plate Carrier is fully adjustable, both in the cummerbund and the shoulder straps.

At the front, the Spirit is equipped with buckle-up/QASM style buckles and is compatible with 8Fields Tactical Buckle-Up placards. The cummerbund is elasticated and includes 6 magazine pouches built-in, though these can also be used for a radio or other similarly sized equipment. On the rear, we are equipped with a pair of zips designed for zip-mounted back panels and two rows of MOLLE loops in case you prefer a MOLLE back panel. The front also includes a panel of Velcro MOLLE loops, allowing you to add pouches or patches at your discretion.

Quality-wise, the Spirit is superb, with fine stitching and high-quality materials used throughout, including YKK© branded zips. If you're after a high-quality plate carrier with an ultra-modern, slimline form, the WETAC Spirit Low-Vis Plate Carrier Vest will suit you perfectly!

This is one for the AK lovers! The Russian Firearm Fanatics and the Weekend Gopnik Operators, here to complete the tactical aesthetic of your AK is the 5KU PT-3 Telescopic Stock, featuring a full alloy construction and a rubber butt pad, this replica PT-3 Classica stock is a fine addition to your Eastern Operator loadout.

A blister pack of 10 x 1.5v Lithium button batteries that are commonly used in Airsoft sights, scopes and other accessories.

A MOLLE compatible double pouch set, that's incredibly affordable setup designed to hold up to 2 double stack pistol magazines at a time.

A lean triple threat, this an ultra compact MOLLE attached solution to Airsoft pistol magazine storage. Holding up to 3 magazines with elasticated retention pockets to keep your mags secured tight while giving you a slim profile when attached to your rig.

An efficient and well-constructed Air Nozzle which is available for a wide range of replicas, and ensures improved durability and smooth operation.

A series of Selector Plates from Modify, which are available for a range of AEGs.

An extremely lightweight and low profile back and shoulders panel of MOLLE, which affords the user maximum manoeuvrability, comfort and connects to a belt system/MOLLE via simple fabric loops.

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

If you like to be at the cutting edge of battery technology when it comes to Airsoft, you're going to want to check this out! The Gens Ace 7.4V 25C 1000mAh Airsoft LiPo Battery - Mini-Tamiya is a slim LiPo battery intended for Airsoft buffer tube battery compartments, AK top covers and other cramped spaces requiring a single cell group. The discharge rate is 25C, giving you a snappy response without risking overspin in most setups, and the capacity is 1000mAh, meaning you might need two to get through a full game day.

Where this battery differs from the norm is its Smart Balance Connector which interfaces with the Gens Ace IMARS Mini Charger, communicating the battery type and current charge levels and immediately commencing optimal charging as soon as this "Smart Battery" is connected. Compared to legacy smart chargers, this saves loads of time but unfortunately means that this battery cannot be charged using a standard LiPo balance charger.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

If you are looking for the icing on the cake of your latest build, a unique flash hider may well be the thing that makes it stand out from the crowd! The Barrett REC 7 style flash hider from KRYTAC is a faithful replica of the real Barrett REC 7 flash hider, even down to the Barrett "B in a box" logo which is engraved into the upper surface. The flash hider features two ports on either side, and can be installed by first loosening the grub screw, threading the unit onto your 14mm CCW male threaded outer barrel, and tightening the grub screw back down when the flash hider is in the correct orientation.

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds.

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional.

If you're running an EARMOR Mark.3 MilPro headset and a helmet, the EARMOR M16C ARC Rail Adapter for EARMOR Mark.3 MilPro Headset is what you need to make your headgear more comfortable. These headset mounting arms are specifically designed for EARMOR's top-of-the-line M32 Mark.3 MilPro and won't fit other M31 or M32 headsets. Made from far stronger polymer than comparable headset arms, these are designed to mount to ARC accessory rails found on FAST helmets, allowing you to remove your headset without first removing your helmet.

The advantage of a helmet-mounted headset is improved comfort, meaning one less band underneath your helmet which will constantly need adjustment to avoid tearing your hair out. Another edge you gain is the ability to stow your headset on the top of your helmet without removing it, allowing you to cool off in those hot summer skirmishes or hear properly in the event your headset cuts out in the heat of battle. If you're rocking the poshest EARMORs around, the Mark.3 MilPro, these enhanced strength headset arms will make wearing your headgear a much more comfortable experience!

If you're looking for some quick simulated medical action. This tourniquet holder, attaches via Velcro and can be installed either vertically or horizontally for quick access to plate carriers and chest rigs. This could mean the difference between (simulated) life and death!

A highly durable heavy duty miniature plastic hard case designed to protect your SD Cards and other small items for storage. This case has a wide variety of safety features made to ensure that your important data storage mediums stay safe even during the toughest conditions, making sure all photos and sensitive data arrives intact.

The case is IP rated and tested to give you the confidence you need to store your favourite bits of kit inside without worry. The case is fully dust resistant a water resistant, protecting the content from anything up to water jets, making the case rain safe, making it the perfect storage solution for anyone who wants to keep their valuables safe in a pinch.

This case is perfect for anyone travelling with SD cards for photography, or for those who want to keep small valuable items safe in a case which is easy to stash or hide.

A simple device yet effective, designed to protect your Airsoft gun's outer barrel threads from damage during gameplay and transportation, or any other situation which might leave the threads exposed to the elements.

The perfect pouch for speedy revolver shenanigans! The Dan Wesson Revolver Speed loader pouch from ASG can hold a single 6 shot revolver speed loader and is an open-topped design for fast access. The pouch is constructed from rigid woven fabric and provides decent retention, meaning your speed loader will not fly out during a sprint! This pouch has a velcro loop at the rear for attachment, is compatible with standard belts (maximum 2-inch width), and can also be attached to MOLLE webbing loops. If you are building your Revolver Ocelot loadout, or you just fancy trying some speedy revolver trick shooting, this pouch will serve you well!

A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position.

A dual-bay Battery Charger for the RunCam Scope Cam 4K, allowing you to charge up to two Batteries simultaneously. Whilst the RunCam Scope Cam is amazing and compact, it's Battery Life is limited, and so will be the deciding factor in how much footage you can capture throughout a day. Provided you have enough Batteries on standby, you can record for as long as you like, making this an essential purchase for any serious Airsoft content creator.

This Hard Case is designed to protect your Passport, Phone, Camera and more from the elements, in a transparent and easy to use Case. Whether you need protection from the ingress of Water or Dust, the effects of extreme Temperature or just simple physical damage, then the PARRA LITE Hard Case will perfectly fill the role.