All External Airsoft Parts & Attachments

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

This slim profile Stock is designed for AR / M4 platform Airsoft Electric Guns, and will attach to any kind of AEG Buffer Tube. There is no dedicated Battery Compartment on this Stock, so you will need to fit your Battery inside the Buffer Tube of your gun. The Rubber Butt Pad is removable to make Battery installation easier; simply pull back the tiny tab on the underside and pull the Pad downwards.

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

A set of Rubber Pistol Grips for Army Armament 1911 Gas Blowback Pistols, which comes as a one-piece design as seen on the R32, and are very easy to install. Simply undo the screws holding your current Pistol Grips into place (carefully removing them as there may be springs on the underside) and install the new set from the front.

If you're in search of a sling solution which easy to mount and remove, the Vector Optics QD Sling Socket & Swivel for 20mm Picatinny Rails is ideal. This set includes a QD sling socket for 20mm Picatinny rails and a QD sling swivel, allowing you to quickly remove your sling without the usual detangling process. The included swivel should fit most slings on the market and is constructed from steel for maximum strength. 

To release the swivel from the socket, simply press the central button and it will pop straight out. Remounting it is as simple as pushing the swivel back into the socket where it will lock in place. The socket should also be compatible with aftermarket QD swivels but due to differing specs between manufacturers, we always advise giving the swivel a thorough test before entrusting it with the weight of your platform. 

Flash light cables dangling and snagging your sling? WADSN has got you and your cables covered! This is a rail cover for M-LOK rail system with a textured exterior for that bit of extra friction and grip. But the real use of this rail cover is that it has a number of recesses for which to run cables through, keeping them confined and tidy.

So if you find yourself with loose cables from tactical devices such as battery wiring, pressure switches and other cables, this is what you need to keep them out of the way and minimize snagging.

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

This Airsoft bipod would be right at home on any sniper rifle or DMR platform. It features an adjustable height with spring-loaded legs so you can get straight to shooting when you find the perfect camping spot. It mounts straight onto 20mm Picatinny rails making it ideal for rifle handguards or sniper rifles with Picatinny sections, such as the Novritsch SSG10 A3. Also included in the box is a sling swivel bipod mount, so you can attach this bipod to other sniper rifles without Picatinny rails.

Its aluminium construction keeps it lightweight but incredibly durable, you won't even notice it attached to your platform until its time comes to be deployed on the battlefield.

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

If you're looking for a new outer barrel to make your M4/AR-15 AEG perfect for woodland skirmishes, the 5KU 16" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 16-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas. 

The 5KU 16" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look rather long and intimidating, the 5KU 16" Aluminium Outer Barrel belongs on your M4 AEG, Just remember to pick up a matching inner barrel!

Crafted for users who do not require or want the large battery space and storage capability of crane stocks and prefer a lighter, simpler, and more compact stock. 

Crafted for users who do not require or want the large battery space and storage capability of crane stocks and prefer a lighter, simpler, and more compact stock. 

This is a Dummy PEQ Box that is designed to look like a Laser/Light Module, but is actually an empty shell that can be used to hide a Battery for your Airsoft Gun.

This is a Dummy PEQ Box that is designed to look like a Laser/Light Module, but is actually an empty shell that can be used to hide a Battery for your Airsoft Gun.

A battery compartment extender designed to fit the G&G ARP9 which allows the use of a wider range of larger batteries.

A Polymer constructed Buffer Tube for Fixed Stock AK models, allowing you to install an M4 Stock on the back of your AK. This also offers you Six Positions to set the Stock to, so that you can rapidly change the overall length of the Gun. This is great for storage and transport, but also for when you want to transition to tighter, indoor areas.

If you're working on an SBR build with a Sandman suppressor, the PTS Syndicate Dead Air KeyMicro Flash Hider is the perfect finishing touch! This steel flash hider replicates the real Dead Air KeyMicro Flash Hider, the shortened variant of the full-size KeyMo Flash hider. Like its longer relative, the KeyMicro Flash Hider is compatible with PTS Dead Air Sandman QD suppressors and mounts to 14mm CCW male threads but its squat, aggressive styling makes it very well suited to modern SBR builds.

Whether you're running a PTS Sandman suppressor or not, this uniquely styled tri-prong flash hider will give your build an elite yet discrete front-end accent with the pre-requisite top-tier PTS Syndicate build quality and official licencing from Dead Air Silencers!

The Delta Armory EGL/EAGLE Stock for M4/AR-15 features a slimline design which is unique to some of the latest releases from Delta Armory. It features a QD sling socket on either side, a low-profile adjustment lever on the bottom together with conventional "footman loops", aka sling slots.

The highlight of this stock is its rubber butt plate featuring lattice checkering and an angled section at the toe for providing grip in the most modern shooting stances, with or without body armour. It's the perfect low-profile stock for any skirmisher who hates snagging the back of their rifle on the surroundings!

Constructed from lightweight alloy, the cover is easily fit by swapping it out with the original folding dust cover. With a rail measuring over 7 inches, this cover gives your AK some much-needed customisation options to which you can attach the sight or scope of your choosing. A scope can now be mounted to the very rear of your dust cover, which gives you a long sight radius.

The cover is installed in place of your rear sight by removing the rear sights' pin. Give your AK some love!

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!

With this muzzle device you can keep your AEG looking like the real thing! The VFC Bird Cage Flash Hider replicates the real M4 muzzle brake seen on service rifles and is constructed from steel with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, iconic look.

Its steel construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage.

A four pack of Keymod compatible Rail covers, designed to give the user a firmer grip on their Rifle during use. The rail panels are constructed from Rubber and are 15cm in length. 

A tough Polymer foregrip for 20mm rail systems, that has an instantly-deployable spring-loaded bipod inside for when you need to hit the ground and achieve a stable shooting position fast.