All Airsoft Guns

The CYMA CM.099 is a faithful replica of the infamous VSS Vintorez Sniper Rifle, a specialist Russian DMR from the AS VAL family that fires the specially-made 9x39mm. This Airsoft Electric Gun replica ticks all the right boxes for a VSS replica, including a rear-wired Stock which makes battery installation much easier than other VSS models.

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you need a big firepower increase but have limited space, the CYMA Pocket Rocket Stand-Alone Launcher Bundle was put together with you in mind! This pack combines the M052 40mm Pistol Grenade Launcher with 2 x NUPROL 40mm MOSCART Gas Grenades, giving you a compact launcher which can be easily carried and 2 chances to shower the enemy with BBs! If you want a run a launcher next skirmish but don't want to carry around another cumbersome platform or mount a massive n00b tube onto your primary, the M052 is the solution you were looking for.

A spring-powered Airsoft Sniper Rifle which is based on the highly successful and widely compatible VSR-10 model. Coming out of the box at 440 FPS w/ 0.2g BBs with a smooth cycling bolt and Real Wood furniture, this is the ideal Sniper Rifle for someone who wants maximum realism and minimal setup / fuss.

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If you like to tiptoe around the skirmish site and catch the enemy off guard, Delta Armory has the perfect AEG for you! Introducing the DA-B04 Silent Ops 8, an M4/AR-15 AEG of the Delta Armory BRAVO™ series. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Internally, the DA-B04 is very well equipped for the price, boasting a 6.03mm tightbore inner barrel, rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. Whether you run it as it is or plan on upgrading it top to bottom, the Silent Ops 8 from Delta Armory will serve you well!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

While the internals of the DA-C06-EGL are similarly equipped to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

Those seeking a lightweight yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is one to watch!

An Airsoft 6mm BB Support Gun, designed for use in Airsoft Skirmishes, and is a replica of the famous PKM Heavy Machinegun used widely by Russian Forces around the world.

*Limited Stock/Warranty. Please see special instructions at bottom of page.

An Airsoft 6mm BB Support Gun, designed for use in Airsoft Skirmishes, and is a replica of the famous PKM Heavy Machinegun used widely by Russian Forces around the world.

*Limited Stock/Warranty. Please see special instructions at bottom of page.

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

If you're bored with your pistol and want a more substantial secondary platform, this bundle should see you well equipped! The Tri-Shot Shotgun Secondary Bundle packages the Double Eagle M56DL with 6 extra 30rnd shells, the 8Fields Tactical Back Scabbard and a bag of Kalashnikov BBs.

Whether you're tearing through your local CQB site clearing rooms or you just want to keep a shotgun handy for close encounters, the lightweight but potent M56DL will be a superb asset to your skirmish experience!

A Gas Blowback Airsoft Pistol manufactured by NUPROL designed to replicate the appearance and feel of a modern MEU 1911 pistol.

If you're in search of a stylish and high-speed SMG, it doesn't get much better than this! This iteration of the CYMA Platinum CM.041G SMG-5 includes all the tasty internals you would expect from a CYMA Platinum series AEG but this one comes with the esteemed Eshooter Kestrel Basic MOSFET, taking the gameplay potential to a whole new level.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

The CM.041G is an impressive platform, great for breaching buildings but also offering some impressive long-distance shooting, rivalling most out-of-the-box M4s in terms of range and accuracy. The CYMA Platinum CM.041G SMG-5 AEG; Kestrel Basic ETU is one of the finest choices for any skirmisher looking to up their game!

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights, a Tactical Rail Slot and a Full-Auto 'Fun Switch' to scare the daylights out of your enemies!

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights, a Tactical Rail Slot and a Full-Auto 'Fun Switch' to scare the daylights out of your enemies!

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights, a Tactical Rail Slot and a Full-Auto 'Fun Switch' to scare the daylights out of your enemies!

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube.

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news!

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news!

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

An evolution of the RAVEN HI-CAPA, a 6mm BB Gas Blowback Airsoft Pistol, which has been heavily modified to turn a relatively small pistol into an absolute beast of an Airsoft Gun. The Dragon 7 takes the existing hi-capa and ramps it up with an added compensator, extended lower rail, as well as an extended inner and outer barrel, making the pistol a sight to behold.

This particular version of the Dragon 7 comes with a Red Dot Sight and Rail mount, giving you a tactical edge in CQB by allowing you to aim your replica quicker and more accurately than those using iron sights.

This pistol is perfect for those Airsoft skirmishers who love to play in style, gone are the days of fitting in with the crowd, show the enemy team you mean business with a pistol which fires as mean as it looks.

If you're in the market for what is probably the most iconic SMG design the world has ever known but you want it cheap, the Jing Gong JG069 SMG-5J SMG AEG should suit you perfectly. This SMG-5 AEG replicates one of the most modern SMG-5 variants, the "J" model first issued to the Japanese Armed Police, and is constructed predominantly from high density polymer to keep the build light, agile and affordable.

Internally, the JG069 is based on the Tokyo Marui SMG-5 A5, meaning full compatibility with aftermarket upgrades for its basic yet functional alloy version 2 gearbox. All of the iconic SMG-5 details are present externally, including its claw-mount compatible receiver, tri-lug muzzle device and ambidextrous fire controls. If you need an SMG-5 in lightweight and cost-effective form, the Jing Gong JG069 SMG-5J SMG AEG is exactly that!

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

If you feel lucky and want to try your hand with an Airsoft revolver, the HFC HG-133C Savaging Bull Gas NBB Revolver is a fine choice. Functioning just like the real thing, with a rotating cylinder, realistic mock shells and a double action/single action trigger, the Savaging Bull is ideal for those who want to experience revolver life without getting in too deep.

Constructed from ABS polymer with choice alloy and steel parts, the Savaging Bull is light and portable despite its relatively long 5-inch barrel. This means it is easy to carry along with your usual sidearm as a last-ditch backup platform, giving you 6 extra chances to get kills when your mags run dry. This may not be the most powerful handgun in the world, but it looks the part and is probably the most affordable way to get the realistic revolver experience!