Airsoft Magazines

If you're running a TM ZET system or CYMA CGS M4/AR-15 GBBR and want immunity from cooldown without HPA, this is the ticket! The CYMA 30rnd CO2 Magazine for CGS/MWS GBBRs is powered by 12g CO2 bulbs, one of which can be inserted into the magazine by removing the CO2 plug on the bottom. The benefit of CO2 magazines is their practical immunity to the effects of "cooldown", resulting in better rapid fire and cold-weather performance.

A hidden trick of this magazine is its ability to be reloaded without being removed, thanks to its nifty replaceable BB track, just like the CYMA CGS HPA magazine. This means if you've still got CO2 left in the tank, you don't need to switch the entire magazine, just pull the tab on the bottom of the mag forward, and you can pull the BB track out and replace it with a fresh one. Like other GBBR magazines, this magazine is loaded through the feed lips on the top, and we recommend using a speed loader with a GBB adapter to make loading easier. 

Compatibility-wise, this mag is designed for CYMA CGS M4/AR-15 GBBRs (and EMG GBBRs made by CYMA) but should also work in other TM ZET system-based designs. If you want to keep your GBBR kicking when the weather gets cold, the CYMA 30rnd CO2 Magazine for CGS/MWS GBBRs belongs on board!

To keep the KTC KG-9 GBB SMG Pistol well fed, you will need some spare magazines! The KTC 55rnd Gas Magazine is exactly that! Compatible with the KG-9 exclusively, this magazine is exactly what you need if you want to run the TEC-9-inspired platform on the battlefield.

It is constructed from alloy and holds 55 BBs, a good amount for firing shots in semi-auto, but can very quickly run dry if you enjoy full auto! It can be loaded like a standard gas mag through the feed lips or like a pistol mag by pulling the follower down and loading it from the bottom. The gas valve is located on the rear of the mag. These magazines are essential if you want to run the KTC KG-9 GBB SMG Pistol in battle!

If you're using the King Arms M1 platform or equally gorgeous M2, these magazines should be of interest to you! They are gas magazines specifically for those platforms and hold 35 rounds, pretty impressive for a gas magazine of its size. They are constructed with a tough and dense alloy, meaning they are very sturdy when it comes to the usual wear and tear.

The feed lips are constructed from polymer and are well-shaped for reliable feeding when inserted into your M1/M2. To fill this magazine with BBs, you can either push them through the feed lips with a GBBR speedloader adapter, or you can pull the spring down, similar to a pistol and load them directly into the BB channel. The gas valve can be found at the bottom of the magazine.

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

A  spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and  WE Europe's G-Series of gas blowback Airsoft pistols. 

Looking for spare magazines for the VORSK VMP-1 or VMP-2? You have found them! The VORSK 45rnd Magazine for VMP GBB Series is constructed from alloy with a steel feed spring and brass valves, holding 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. The fill valve is on the baseplate and as with all GBB mags, you'll need to invert the mag to fill it with gas.

Please note, these magazines do not include the polymer magazine sleeve, but you can grab them here: Sleeve for VMP-1 | Sleeve for VMP-2

Ideal for VMP-1 or VMP-2 users who need maximum capacity, this magazine is also compatible with ASG MP9 and KWA TP9 replicas. If you're gearing up to run the VMP-1 or any VMP-2 variant, these magazines are essential!

This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.

If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.

Perfect for any Airsofter wielding an Airsoft pump-action shotgun, the Golden Eagle 30rnd Tri-Shot Shotgun Shell Magazines; 6 Pack contains 6 red tri-shot shotgun shell magazines, each capable of holding 30 rounds of 6mm Airsoft BB ammunition.

These shotgun shell mags work with TM, Double Eagle, CYMA and Golden Eagle spring-powered tri-shot shotguns and gas-powered 3/6 shot shotguns, but they also look the business when carried on a rig in molle loops or a shell carrier!

A 25 Round Green Gas Powered Magazine designed for the GLOCK 17 Gen5 by UMAREX.

Want to run your trusted side arm as a primary? Now is your chance! A 30 round magazine for the 1911 platform designed for the Army Armament 1911 / R32.

A spare Gas magazine for the Army Armament R501 Gas Blowback Airsoft Pistol, which holds a total of 30 BBs and is the perfect way to spend more time in the field playing, and less time in the safe zone reloading. The magazine features a custom Polymer Baseplate which is easily slid to the side to access the inlet valve. 

If you're running your VMP-1 SMG as a backup or cutting about with the beastly VMP-2D or MD, the VORSK 20rnd Short Gas Magazine for VMP GBB Series is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol or need compact mags to suit your VMP-2D or VMP-2MD DMR, these are what you need!

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

If you want to take pure advantage of the AAP-01's insane rate of fire or you operate with the philosophy that reloads are for losers, the Action Army 350rnd Drum Magazine for AAP-01 GBB Pistols is perfect for you! This green gas drum magazine operates via a "flash mag" type system, meaning instead of winding an awkward wheel to keep the mag feeding you simply need to pull the steel drawcord on the base 4-5 times and you're ready to rock.

The Drum Magazine holds 350 BBs, more than 10 times the capacity of a standard AAP magazine and around 7 times the capacity of an extended AAP magazine; the perfect thing for AAP owners making full use of full auto and those who move so fast they ain't got time to reload!

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

Finally! A 50rnd Extended Magazine for EU-Series gas pistols, which accepts a 12g CO2 Sparklet! This means that even on the coldest days, your 50rnd Magazine can be put through your pistol without issue. The strong performance of CO2 should ensure that you can blast through an entire magazine, and have a great time doing it.

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

A 30 Round Green Gas Magazine for the UMAREX Heckler & Koch HK416A5 Airsoft Gas Blowback Rifle and also compatible with VFC M4/AR-15 GBBRs. 

If you need spare magazines for your Cybergun WE/Armourer Works Desert Eagle GBB you have found them! These mags are constructed from alloy with polymer feed lips, a steel feed spring and brass valves and are compatible with the Cybergun Desert Eagle but only the version manufactured by WE or Armourer Works.

Each mag is designed to mimic the real thing perfectly, complete with mock witness windows on the left side with numerical engravings indicating the capacity of the real Deagle. The gas fill valve is located on the baseplate and the mag is compatible with summer gas, green gas and red gas. Unlike other GBB magazines, this mag cannot be loaded through the feed channel as it is closed off like a GBBR mag and instead must be loaded through the feed lips at the top of the mag, so we recommend using a speed loader with a GBB adapter for ease of loading (like this).

Please note, this magazine is NOT compatible with Cybergun's KWC Desert Eagle CO2 FULL AUTO and will only work with Cybergun WE/Armorer Works Desert Eagles.

The STTI 28rnd CO2 Magazine for MK23 NBB Gas Pistols is perfect for those winter months. CO2 is much more consistent than green gas in the cold weather, every sneaky sniper needs these mags for their trusted sidearm during those cold skirmishes. It is compatible with the STTI ST-23 non-blowback pistol but also fits in other brands of non-blowback MK23 pistols. It is constructed from a tough Alloy, looking identical to the standard MK23 magazines, and holds a total of 28 BBs.

The CO2 compartment is inside the shell and is accessible from the bottom. To open it, simply undo the bottom screw with an Allen key. With this done, you will see the CO2 capsule space inside, here you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten the Allen key screw back down and you're good to go!

The ideal magazine for those who want to spend less time reloading and more time shooting!

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 21 rounds. The magazine is a direct replacement of the magazine which comes with the pistol, and great for those who want the original magazines which go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

If your 1911 Pistol had an underwhelming performance in the cold weather, you need a CO2 magazine and the performance will be much better! CO2 is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past! Also remember that CO2 does not contain any lubricant of its' own, and so you will need to lubricate your Pistol regularly using a Silicon Lubricant, such as:Abbey Silicone Gun Oil 35 Spray.

Just remember that the laws of physics still apply, and if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol. Please ensure that all CO2 has been used in the Magazine before attempting to remove the Bulb, as it could still be under pressure. Excess CO2 is best used by firing the Pistol, rather than pressing the knocker valve on the back of the Magazine.

Keep your 1911 performing well no matter the weather with the WE 15rnd CO2 Magazine for 1911 GBB Pistols, come rain or snow your 1911 will still be able to complete the mission.