Airsoft Magazines

A Spare Gas Blowback Magazine for any generation of the WE F226 range. 

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 23rnd TP22 / EU Green Gas Magazine is constructed from alloy. This green gas magazine can be filled through the fill valve on the rear of the magazine. This magazine is designed for

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. This is a great multipurpose magazine if you have a variety of pistols that you take to the battlefield.

Have you ever owned a 1911 Pistol and been underwhelmed with the performance in cold weather? The size of a 1911 Magazine makes them rather inefficient, however this Extended 36rnd CO2 Magazine for RAVEN 1911s fixes the problem by using CO2, which is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past!

A time with a full alloy outer construction and base this magazine is durable yet lightweight. The feed lips and BB follower are polymer and are replaceable. 

An 18-round CO2 Powered Gas Magazine for the UMAREX Glock 17 Gen.4 CO2 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades. Please note, this magazine is specifically for the Umarex Glock 17 Gen.4 Co2 GBB with the manufacturer part number 2.6434 and is unlikely to work with other Umarex Glocks. 

This alloy magazine can hold up to 24 rounds to use with any generation of the Raven R series or WE Europe F series of pistols. The mag uses green gas, which can be added via the valve on the base of the magazine. For filling with BBs, there is a window on the front which is wider towards the base, accessed when the follower is pulled down.

A 20 Rounds Green Gas Magazine for the UMAREX Airsoft HK417D Gas Blowback Rifle.

A gas blowback Airsoft 6mm BB gun magazine designed for WE Europe's F228 series and F229 series pistols. A perfect spare to increase your trigger time, without stopping to reload. 

Need mags for your TM ZET system M4/AR-15 GBBR? The M4A1 MWS ZET 35rnd Gas Magazine from the one and only Tokyo Marui is what you need! Made to the high standards associated with Tokyo Marui, this 35-round magazine is a steel-shelled STANAG magazine design which accepts summer gas, green gas or red gas and is compatible with the TM M4A1 MWS and the MTR-16 GBBRs. 

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

Do you find yourself running out of ammo way too often? We have the solution! The Tokyo Marui 90rnd Saiga-12K Long Magazine is exactly what you need to keep on blasting for longer. This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!

The magazine holds a whopping 90 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To insert this magazine, use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.

The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine

A gas blowback Magazine for the WE Europe EU-Series Pistols EU19, and EU23.

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

If you have the desire to dump 350 rounds in one long burst from your GBB pistol but you don't want to go the HPA route this is your chance! The WE Europe 350rnd Green Gas Drum Magazine is designed for WE's GBB EU series which means it will also work in the Action Army AAP-01.

The magazine is constructed with a hefty alloy gas reservoir with a high density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you go pistols only and you need extra firepower to compete, this will suit you well!

If you need more firepower for your WE Galaxy EU series or optics-ready Armorer Works VX7/9, this will do the trick! The Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series boasts a whopping capacity of 350 BBs, loaded through the fill window on the left side of the mag body. Simply slide the door open and pour your BBs in, just like an AEG high-cap.

The winding wheel is on the front, easily accessed when wearing gloves and very fast to wind; a significant step up from comparable winding wheels and "flash mag" style setups which can be a hassle to use under pressure. Once your BBs are loaded, wind the wheel until the noise changes and you're ready to give 'em hell!

The fill valve is located on the baseplate, requiring the mag to be inverted to fill with gas. Boasting a gas reservoir just as massive as its BB capacity, this drum mag will handle rapid-fire far more effectively than standard or even extended mags, ideal for those who run their pistol as a primary. Compatibility-wise, this mag is only for the WE Galaxy EU series, WE EU-series MOS and Armorer Works VX7/9 optics-ready versions and won't work with standard EU series pistols.

With 350 BBs on tap with plenty of gas to get them on target, the Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series is the perfect addition for any pistol user that hates reloading and loves dumping rounds downrange!

A CO2 magazine in that holds up to 25rnds at a time. CO2 powered the 12g bulb is stored in the bottom of the magazine with an easy to release base plate and easy access CO2 base plate. 

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you have a premium EU-style pistol such as the PTS Syndicate ZEV OZ9, you need this magazine! The PTS Syndicate SAM 25rnd GBB Magazine is as good as it gets when it comes to Airsoft pistol magazines. With a plethora of quality upgrades, this magazine is worth every penny.

It's compatible with most EU-style pistols, including Tokyo Marui and any clone of that model, making it very versatile if you enjoy that pistol style. The SAM magazine is designed for performance and durability, making it perfect for all skirmishers. Pick yours up today and dominate the battlefield!

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.

If you're looking for magazines for your Army Armament R36 GBBR or WE G39C AR36 GBBR go no further as you have found them! This magazine fits these rifles ONLY and is not compatible with other brands AR36 varients. It has a realistic weight and ammo capacity, making it perfect for military operation enthusiasts or those who like to skirmish as realistically as possible.

The mag is constructed with a high-density polymer shell with alloy internals and is loaded through the feed lips at the top of the mag body with a speed loader, preferably with a GBB adapter. The gas fill valve is on the bottom of the magazine and requires the polymer bottom cover to be slid off for access. The magazine is compatible with both green gas and red gas, ready for most weather conditions.

The polymer shell also features grooves on either side, which allow multiple magazines to be attached to one another for easier storage or faster reloads. keep your R36 in the fight for longer with some spare magazines and outgun all your opponents on the battlefield. This trusty mag is sure to withstand even the harshest of skirmishing conditions.

Suppose you're looking for some extra magazines for your gas blowback AK platforms, if so, then the GHK 40rnd Magazine for AK74 GBBRs is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it very robust and reliable, sure to survive even the most intense of skirmishes. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 40 rounds, and features Polymer feed lips, which are also the fill location using an Airsoft speedloader. The magazine gas fill valve is found at the rear using any Airsoft green gas. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to lock it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your gas blowback AK down, the GHK 40rnd Magazine for AK74 GBBRs is certainly the choice for you!

Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.

A CO2 powered 21rnd magazine for the KWC/Cyber Gun CO2 powered Desert Eagle.