Airsoft Magazines

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

A Green Gas, 25 round magazine for the UMAREX Heckler & Koch USP .45 GBB Pistol.

If you're rocking the Umarex/GHK Glock 17 MOS or Glock 45 MOS GBB pistol, these are the mags you need! The Umarex 20rnd Magazine for GHK Glock 17/45 Gen5 MOS GBB is officially licenced by Glock Ges.m.b.H and includes Glock markings on the baseplate to complete the look. 

A more realistic design than your usual Glock mag, this magazine doesn't have a follower channel on the front, making it look almost identical to a real Glock magazine. Loading BBs is done through the feed lips at the top of the magazine body using a speed loader and the gas fill valve is on the bottom, concealed beneath the baseplate. To access the fill valve, push the detent on the bottom of the baseplate inwards and slide the baseplate off. Compatibility wise, this magazine is designed specifically for the GHK OEM Glock 17 MOS and Glock 45 MOS and in all likelihood, won't work with other Glock or EU series platforms. 

If you have bagged yourself an interesting anime-inspired GBB pistol you will need the right mags! The Double Bell 18rnd Green Gas Magazine for AM.45 GBB Pistols is styled after a real steel 1911 magazine but is only compatible with Double Bell's funky-lookin' Vorpal Bunny GBB or the super aggressive AM.45 "Chisato".

The magazine suits the style of the AM.45 perfectly with its finger ledge baseplate in either hot pink or matt black. The mag can be filled through the feed lips on the top of the mag or through the feed channel on the front by pulling the follower down and filling from the widened section at the bottom. The fill valve is on the baseplate and as always, the mag will need to be inverted to fill it with gas.

If you have bagged yourself an interesting anime-inspired GBB pistol you will need the right mags! The Double Bell 18rnd Green Gas Magazine for AM.45 GBB Pistols is styled after a real steel 1911 magazine but is only compatible with Double Bell's funky-lookin' Vorpal Bunny GBB or the super aggressive AM.45 "Chisato".

The magazine suits the style of the AM.45 perfectly with its finger ledge baseplate in either hot pink or matt black. The mag can be filled through the feed lips on the top of the mag or through the feed channel on the front by pulling the follower down and filling from the widened section at the bottom. The fill valve is on the baseplate and as always, the mag will need to be inverted to fill it with gas.

A replacement magazine for EX Series PX4 Style WE Airsoft gas blowback pistols.

A gas blowback CO2 magazine, designed for Cyber Gun's series of Colt 1911 Rail Gun Airsoft replica pistols.

If you have a GBB SCW-9 SMG and you need a spare magazine, this is for you! This magazine has a translucent polymer shell with realistic-looking faux bullets behind it. This gives it a very realistic look for all of you who enjoy your realism. The magazine holds a total of 45 BBs, a more realistic capacity compared to most common AEG magazines.

To load the Maruyama 45rnd Magazine For SCW-9, use a speedloader, preferably with a gas magazine attachment, on the feed lips. The gas inlet valve can be found on the bottom of the magazine and is constructed from brass, like most other inlet valves.

A Green Gas, 22 round magazine for the UMAREX Heckler & Koch VP9 GBB Pistol.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

A magazine designed for WE brand AR36 / G39 Airsoft gas blowback rifles.