Airsoft Magazines

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

If you want to keep your B9 pistol running when the cold sets in a CO2 mag is the only way to do it. The WE 25rnd CO2 Magazine For B9/92 is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE B9 and B92 pistols and will not work in other versions. The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. 

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

If you desire to dump 350 BBs without the added effort of swapping magazines but don't want to mess with a HPA setup then this is your chance! This WE 350rnd Green Gas Drum Magazine is designed for WE 1911 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

A chrome-effect gas magazine for the WE XDM Compact 3.8, which can hold up to 17 rounds.

An Alloy constructed spare (or replacement) Magazine for the KWC Non-Blowback PM CO2 Makarov Pistol, which takes standard 12g CO2 Bulbs from the side and is filled with 13 x BBs either by hand or with a Speedloader. If you own a KWC PM CO2 Makarov and want to spend longer in the field playing, and less time in the safe zone reloading, then you need to stock up on spare Magazines.

A gas blowback magazine designed for the WE Europe EU-Series compact pistol range, and is designed to fit the EU26, EU27, and the EU33 Advance with the grip extension removed. The magazine is constructed from Alloy, with a Polymer base plate, feed lips and follower, and comes fitted with a unique curved base plate.

A spare or replacement magazine for the Cyber Gun PGM .338 Bolt action Snipers rifle. This magazine has an authentic steel shell, and a mix of polymer and alloy internal parts. The magazine holds 19 rounds and has a large gas reservoir, enabling it to be filled multiple times with BBs before the propellant runs out.

Suppose you're looking for some extra magazines for your WE gas blowback AK platforms, if so, then this WE 30rnd Gas Magazine is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it robust and reliable, perfect for the battlefield. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 30 rounds, and features Polymer feed lips, which is also the BB fill location using an Airsoft speedloader. The magazine gas fill valve is found on the bottom of the magazine. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to "lock" it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your WE gas blowback AK down, the WE 30rnd Gas Magazine for WE AK GBBRs is certainly the choice for you!

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

If you have yourself one of the cutest backup pistols around, the Cyber Gun Colt Junior, you may want a spare mag to give you an even better chance in those last-ditch scenarios! The 7 rnd Colt Junior GBB Magazine from Cyber Gun is similarly laid out to a standard GBB magazine but miniaturised. The magazine can be loaded through the feed lips at the front, and the gas fill valve can be found on the magazine base plate. The left side of the magazine features a pull-down follower, making it easy to load BBs even without a speed loader.

If you're running a TM ZET system or CYMA CGS M4/AR-15 GBBR and want immunity from cooldown without HPA, this is the ticket! The CYMA 30rnd CO2 Magazine for CGS/MWS GBBRs is powered by 12g CO2 bulbs, one of which can be inserted into the magazine by removing the CO2 plug on the bottom. The benefit of CO2 magazines is their practical immunity to the effects of "cooldown", resulting in better rapid fire and cold-weather performance.

A hidden trick of this magazine is its ability to be reloaded without being removed, thanks to its nifty replaceable BB track, just like the CYMA CGS HPA magazine. This means if you've still got CO2 left in the tank, you don't need to switch the entire magazine, just pull the tab on the bottom of the mag forward, and you can pull the BB track out and replace it with a fresh one. Like other GBBR magazines, this magazine is loaded through the feed lips on the top, and we recommend using a speed loader with a GBB adapter to make loading easier. 

Compatibility-wise, this mag is designed for CYMA CGS M4/AR-15 GBBRs (and EMG GBBRs made by CYMA) but should also work in other TM ZET system-based designs. If you want to keep your GBBR kicking when the weather gets cold, the CYMA 30rnd CO2 Magazine for CGS/MWS GBBRs belongs on board!

If you are looking to take your Vorsk VX26 out into the cold look no further! This CO2 magazine will ensure you get the absolute best out of your GBB pistol, even over the winter months. Remember to lubricate both the magazine and pistol to prevent damage to your seals as CO2 contains no lubricant. This magazine uses 12g CO2 bulbs without threading.

If you need to carry some extra rounds for your SRC SR-SP GBB Pistol, you need a couple of these! Like most Airsoft pistol magazines, it features a double-stacked design, capable of holding up to 25 rounds. Ammunition can be loaded from the front either by hand or using an Airsoft speed loader, once the BB guide has been pulled to the bottom of the magazine.

This magazine can be filled with gas via the valve on the bottom through the base plate, which is removable, allowing easier access for any maintenance and can be replaced should the magazine become damaged. On closer inspection of the magazine, subtle Raven logos have been engraved into the bottom of the base plate, a tasteful finishing touch.

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

If you plan on taking your WE Pistole 38 GBB Pistol out on the skirmish field but you feel like one 14rnd magazine is nowhere near enough ammo for you, then you need the WE 14rnd Gas Magazine for P38 Pistol! This magazine is the same as the one that comes with the pistol, so there will be no concerns with compatibility.

It holds 14 BBs and is filled using a speedloader on the feed lips at the top of the magazine. This is a low-capacity but is still 6 ammunition more than the real steel pistol. Its alloy shell protects the polymer internals and gas chamber, which can be filled at the bottom of the magazine in the gas valve.

Pick up some spare magazines for your P38 pistol and take it with you to your next skirmish, or pick up a couple of mags for some test firing in the garden!

Do you need some spare mags for your KJ Works M1911A1? Well, you're in luck! The KJ Works 28rnd CO2 Magazine For KJW 1911 is designed specifically for that pistol. It holds 28 BBs which is an impressive amount considering some pistol magazine capacities. 

CO2-powered guns work exceptionally well in cold weather, whereas some other gas-powered guns often struggle. However, be warned that if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol due to the cold temperatures and power of the CO2 gas. Also, remember that CO2 does not contain any lubricant of its' own, so you will need to lubricate your Pistol regularly using a Silicon Lubricant to keep it in tip-top condition.

To keep the KTC KG-9 GBB SMG Pistol well fed, you will need some spare magazines! The KTC 55rnd Gas Magazine is exactly that! Compatible with the KG-9 exclusively, this magazine is exactly what you need if you want to run the TEC-9-inspired platform on the battlefield.

It is constructed from alloy and holds 55 BBs, a good amount for firing shots in semi-auto, but can very quickly run dry if you enjoy full auto! It can be loaded like a standard gas mag through the feed lips or like a pistol mag by pulling the follower down and loading it from the bottom. The gas valve is located on the rear of the mag. These magazines are essential if you want to run the KTC KG-9 GBB SMG Pistol in battle!

If you're running a WE SMG-8 GBB platform, you'll need a few of these to keep the fun and kills coming! The WE 44rnd Magazine for WE GBB SMGs is constructed from alloy and compatible with the WE SMG-8 and similar platforms from WE. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

If you're using the King Arms M1 platform or equally gorgeous M2, these magazines should be of interest to you! They are gas magazines specifically for those platforms and hold 35 rounds, pretty impressive for a gas magazine of its size. They are constructed with a tough and dense alloy, meaning they are very sturdy when it comes to the usual wear and tear.

The feed lips are constructed from polymer and are well-shaped for reliable feeding when inserted into your M1/M2. To fill this magazine with BBs, you can either push them through the feed lips with a GBBR speedloader adapter, or you can pull the spring down, similar to a pistol and load them directly into the BB channel. The gas valve can be found at the bottom of the magazine.

Shooting 350 BBs at a target without the added effort of swapping magazines sounds nice right, but usually that comes with the pain and price tag of setting up HPA build, well not anymore! This WE 350rnd Green Gas Drum Magazine allows you to do just that, let off 350rnds without being interrupted by having to swap magazines. It is designed for WE B92 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

If you are running the hard recoiling SRC SR40 GBB, you will need some mags! The 30rnd CO2 Magazine for SR40 GBB SMG is constructed with a steel shell featuring authentic reinforcement ribs on each side, granting an authentic weight and feel along with flawless looks.

This magazine is a CO2 magazine, meaning it is powered by a 12g unthreaded CO2 capsule. The capsule is inserted into the bottom of the mag by removing the baseplate and unscrewing the CO2 plug using an Allen key. The mag is loaded through the polymer feed lips at the top of the design, and we recommend a speed loader with a GBB adapter for ease of loading. Holding 30 BBs, this mag is perfect for skirmishers who value realism.

Looking for spare magazines for the VORSK VMP-1 or VMP-2? You have found them! The VORSK 45rnd Magazine for VMP GBB Series is constructed from alloy with a steel feed spring and brass valves, holding 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. The fill valve is on the baseplate and as with all GBB mags, you'll need to invert the mag to fill it with gas.

Please note, these magazines do not include the polymer magazine sleeve, but you can grab them here: Sleeve for VMP-1 | Sleeve for VMP-2

Ideal for VMP-1 or VMP-2 users who need maximum capacity, this magazine is also compatible with ASG MP9 and KWA TP9 replicas. If you're gearing up to run the VMP-1 or any VMP-2 variant, these magazines are essential!

A spare or replacement Magazine for Army Armament branded 1911 series Gas Blowback pistols, holding a total of 25rnds and being compatible with R31 and R29 models. It has a flat baseplate so that it fits flush with the bottom of the Pistol Grip, and is reportedly compatible with Army, APS, KJ Works and Tokyo Marui models.

A 40 Round Green Gas Magazine for the UMAREX Airsoft Gas Blowback MP7A1.

A magazine designed for use in the WE Europe's EU-Series of pistols. Each magazine is of a full metal construction and holds up to 25 rounds.