Airsoft Magazines

Ever heard of the MG36? Potentially not, as this support weapon version of the AR36 never made it past the prototype stage, though the elite German KSK has been sighted running a similar setup in the early 2000s in Afghanistan. The NUPROL 1200rnd Electric drum magazine allows you to add some serious MG36 like firepower to your AR36 platform AEG, and transform it to provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the all polymer, highly modern AR36 platform.

This 54rnd magazine is designed for AR36 platform Airsoft Electric Guns, and comes included with a set of Bullet Stickers to install behind the semi-transparent plastic, to make your replica look as realistic as possible. Not only this, but multiple magazines can be clamped together for lightning-fast reloads and easier magazine management. A Speedloader is required to fill; the magazine will feed until empty, without any annoying rattle sound.

A 300 Round High Capacity Magazine designed for the Cybergun Famas.

If you have an ARCTURUS AK in your arsenal and are tired of constantly having to reload after every fight, you need this! The ARCTURUS 550rnd Hi-Cap Magazine for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine. Simply fill it with BBs at the fill window on top of the magazine and spin the wheel on the bottom to load the BBs.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

If you own the EMG TTI JW4 Gen-12 Automatic Shotgun, you will definitely need some spare magazines. The full-automatic capabilities of that shotgun eat all your ammo reserves within the blink of an eye. A Double Bell 900rnd Hi-Cap Magazine For GEN-12 Series will provide you with another 900 BBs so you can carry on your operations for longer. 900 BBs is no joke, it's basically a whole bottle of BBs in one magazine!

This magazine is a high-cap variant, evidenced by its huge 900rnd capacity. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for quick reloads to stay in the fight. The magazine is constructed from high-density polymer and features a matte black colour and some texturing for a satisfying feel and for ease of loading.

Stay in the fight for longer with the WELL 30rnd Low-Cap Magazine for MB02/03/07/10 Sniper Rifles! This magazine is made with an alloy shell, polymer internals and a steel feed spring and is designed for WELL-branded VSR-10 clones such as the MB02/03/07/10 series.

This mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. Compatibility-wise, this mag will work in any WELL or WELL PRO VSR-10 clone rifle and may also work in VSR-10 clones made by other brands. If you're running out of rounds before you're back at respawn, grab some WELL 30rnd Low-Cap Magazines for MB02/03/07/10 Sniper Rifles to maximise your K:D ratio!

A 20rnd spare or replacement Magazine for the CYMA branded CM.706 Airsoft Sniper Rifle. If you want to spend more time set up in your nest and less time walking back to the safe zone for a reload, then you need to stock up on Magazines to prevent you having to give away a good position. Constructed from a mix of Alloy and Polymer, these Magazines can be filled by hand or using a Speedloader, and are a great way to stay in the fight for longer. The design of the Magazine allows them to 'spring' out of the Mag Well when released, making them much easier to remove.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

A 40 Round magazine for the CYMA CM.708 Bolt Action Airsoft Rifle.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 70rnd Mid-Cap Magazine is compatible with the Double Bell BY-805 SCAR-H AEG ONLY and is of a mid-cap design. It is filled via the feed lips located at the top of the magazine. All you need to do to ready this mag for battle is fill it up with BBs through the feed lips and then it's ready to go. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

Pick up some spare magazines for your Double Bell BY-805 SCAR-H AEG and rule the skirmish field with your iconic replica and plenty of mags to spare!

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 70rnd Mid-Cap Magazine is compatible with the Double Bell BY-805 SCAR-H AEG ONLY and is of a mid-cap design. It is filled via the feed lips located at the top of the magazine. All you need to do to ready this mag for battle is fill it up with BBs through the feed lips and then it's ready to go. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

Pick up some spare magazines for your Double Bell BY-805 SCAR-H AEG and rule the skirmish field with your iconic replica and plenty of mags to spare!

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

If you need a spare mag for your Double Bell Lee Enfield, here you go! The Double Bell 6 Shell Magazine for SMLE No.1 MK.III Lee Enfield Rifles holds 6 Double Bell Lee Enfield/KAR98K shells (not included) and is compatible specifically with the Double Bell Lee Enfield No.1 MK.III S.M.L.E Bolt Action Sniper Rifle; Shell Ejecting. 

The magazine is constructed from alloy with a gun metal finish which closely matches the real thing. While it may not be the most practical skirmish primary, the fun factor of the shell-ejecting Lee Enfield is off the charts. If you want to keep your Double Bell Rifle No.1 MK.III SMLE well fed, this magazine is what you need!

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

A CO2 magazine designed for the WE EU-Series pistols, allowing you to make the move from Green Gas to CO2. The magazine is robust and gives excellent power for every shot, built from Alloy the magazine comes with a steel screw in base for extra durability. 

Keep running out of ammo on the battlefield? Stock up on some spare A&K 95-round Mid-Cap SMG-5 AEG Magazines now! These magazines are compatible with a wide variety of SMG-5s, including the CYMA models. It boasts a unique QPQ (Quench Polish Quench) finish, which is a process commonly used in the firearms industry. This gives the magazine a stylish finish and minimises the risk of corrosion.

As this is a 95rnd Mid-Cap magazine, you won't experience any battle-rattle whilst racing around the skirmish field, allowing you and your SMG-5 to remain sneaky, just like the special forces.

If you want to sneak about with your PPSh-41 AEG, ditch that drum magazine and use this instead! The 130rnd Mid-Cap Magazine for SW-09 PPSh-41 AEG from Snow Wolf is authentically constructed with a hefty and solid steel shell to compliment the already very realistic SW-09. This is a mid-cap magazine, meaning no battle rattle to alert the enemy as you advance, and easy loading through the fill/feed port at the top of the magazine body with no need to wind it up. 

This magazine is compatible with the Snow Wolf SW-09 PPSh-41 AEG but unfortunately won't fit the S&T version. If you're a stealthy skirmisher using a Snow Wolf PPSh-41, these magazines are essential!

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 105rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 105bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

If you want to be a bit less cumbersome on the battlefield whilst you wield your PPSH-41 AEG then you should consider investing in the S&T 130rnd SW-09 PPSH-41 Steel Magazine. This magazine is a lot smaller than the traditional drum magazine, making it much easier to charge around the battlefield and minimising the dreaded "battle rattle".

The shell has been constructed from solid steel, giving the magazine a hefty realistic feel, it almost feels like the real deal! It is compatible with both the S&T and Snow Wolf PPSH-41 AEGs. The steel feed spring guarantees a much more reliable BB feed as compared to other alloy springs, ensuring that you can fire all 130 BBs with no issues whilst out on the battlefield.

If you like your PPSH-41 AEG, but think the drum mag is just a little bit over the top for your skirmish operations, then the S&T 130rnd SW-09 PPSH-41 Steel Magazine is for you!

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!