Airsoft Magazines

If you are running the Well WE23-Mini you will probably want a couple of these on hand to keep up with its intense rate of fire! The WELL PRO 600rnd Magazine for WE23-MINI Minigun holds 600 BBs and winds itself via the internal motor of the Minigun itself, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

The S&T 2500rnd Electric Drum Magazine For S&T/AGM MG42 is a faithful replica of the real steel MG42’s compact 50-round drum magazine, except, it has a whopping 2500 BB capacity! That's like a whole bottle of BBs. This magazine also has some high-tech features, requiring 4x AA batteries, when plugged into your AGM MG42 Airsoft Support Rifle it will wind itself every time the trigger is pulled. This means that all 2500 BBs will be automatically fed into your support rifle without any extra work from you, a seriously useful feature. The electric winding system also reduces the chance of misfeeding, as the BBs will only be fed when one is shot from the MG42.

This steel magazine is just what you need to keep your Airsoft support rifle feeling realistic, it also features a carry handle for easy transport when it's not clipped into your replica.

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

A tough Polymer constructed magazine for a range of CYMA/WELL series Spring Sniper Rifles (check compatibility), which offers a whopping 100rnds to lay down on the enemy from afar. 

If you're running a WELL MB441 Series sniper such as the WELL MB4418-2 WELL MB4418-3, you need a couple of these. The WELL 30rd Low-Cap magazine for WELL MB441 Series Sniper Rifles is constructed with a steel shell, polymer internals and a steel feed spring, showcasing realistic mock reinforcement grooves on each side, just like real steel sniper magazines.

This mag holds 30 BBs and is loaded through the fill/feed port at the top front of the magazine body using a speed loader or loading tool. If you want to keep your Sniper Rifle in the fight for longer, these spare magazines are the key!

Do you need a couple of spare magazines for your Type 38 or Type 97? This is exactly what you are looking for! It is a direct copy of the magazine that comes with the Arisaka rifles and therefore it will be a guaranteed fit. This does however mean that it is ONLY compatible with these rifles and no others.

It is constructed from a high-density polymer and holds 26 BBs, it's the perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer. Its spring-fed design negates the "battle rattle" effect, allowing you to stay sneakier!

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

If you're rocking an MG 26(T) for that extra retro vibe on the battlefield, you'll need some of these to keep it fed! The Snow Wolf 110rnd Mid-Cap Magazine is specifically designed for the Snow Wolf MG 26(T) Light Machine Gun Replica AEG and is constructed with a steel shell, polymer internals and a steel feed spring.

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real steel MG 26(T)  magazine, these mags are rather massive. Due to their unique size and design, you'll need to find an appropriately sized magazine pouch to fit them!

A green gas magazine designed for the ICS BLE-XFG range of pistols. Holds up to 19 rounds

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

Box / Drum Magazine designed for use with the TM AA-12 Sledge Hammer Automatic Electric Shotgun and holds an obscene 3000 rounds for those who must absolutely guarantee that they hit their target.

If you need more mags for your NUPROL Tango T96, Well MB-06 or ASG Urban Sniper Rifle, this is the one! The NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is a spring loaded low-capacity magazine which holds 24 BBs, loaded through the feed lips on the top either by hand or using a speed loader.

This magazine is compatible with the NUPROL Tango Series T96, ASG's Urban Sniper Rifle, the WELL MB-06 Spring Sniper Rifle and the Maruzen APS SR2 Sniper Rifle on which the design is based. If you need more mags to keep your bolt-action in the fight, the NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is ideal!

A high capacity magazine for AK platforms; Both the AK47 and AK74 will be able to accept this from a range of manufacturers. Constructed from high density polymer and holding up to 550 rounds.

Looking for Grease Gun mags? The Snow Wolf 520rnd High-Cap Magazine For M3/M3A1 Grease Gun AEG is authentically built with a steel shell and is a wheel wound high cap magazine which holds 520 BBs. The magazine can be loaded through the fill window at the top of the magazine body by pouring BBs straight in and the winding wheel is located on the baseplate and needs to be wound up to tension the mag.

This magazine is compatible with the Snow Wolf M3 and M3A1 Grease Gun AEGs but may not be compatible with other brands.

If you want to take your S&T Nambu Type 100/40 Submachine Gun AEG out on the skirmish field, you're going to need some spare magazines! This magazine has a durable steel shell and reliable feeding spring, ensuring that this magazine with survive anything a skirmish has to throw at you. Its 110rnd capacity is plenty enough for any skirmisher who plays close-quarters whilst out on the battlefield.

The mid-cap design means that you don't need to wind this magazine at all and it will feed until it's empty, this allows for faster reloads and complete uninterrupted play until the magazine is empty. The curved design allows for a better grip on the magazine whilst reloading and whilst holding the magazine during firing.

Keep your Nambu Type 100/40 Submachine Gun AEG well fed whilst out on the battlefield with an extra 110rnd for every magazine, exactly what you need to skirmish your WW2 loadout effectively!

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

If you're involved in a mix of milsim and standard skirmishes, these are the mags for you! The ARCTURUS 30/130rnd EMM Variable-Cap Mag for M4/AR-15 AEG; 5 Pack is a great value set of 5 matching magazines, made from strong and light high-density polymer with a modern aesthetic. These magazines are designed for M4/AR-15 AEGs but should also work in most SCAR-L and L85 AEGs.

Each magazine is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. To adjust capacity, press the button on the centre of the baseplate and slide the baseplate forward and off the magazine. After this, slide the internals out through the bottom to access the capacity switch and choose between a realistic 30-round mag and a more competitive 130-rounder!

On the outside, these ARCTURUS magazines feature a "mag pod" style baseplate to be used as an improvised shooting support, texture and linear serrations for optimal traction and a witness window on each side so you can confirm your magazine's current round count. If you're looking for versatile, modern mid-caps to fill your rig, the ARCTURUS 30/130rnd EMM Variable-Cap Mag for M4/AR-15 AEG; 5 Pack is a superb option!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

NUPROL bring us another variant in the ever popular AK magazine range. With lightweight polymer construction, this mag is that of a mid-cap magazine, meaning that the magazine is filled at the top using a speedloader. Being a mid-cap means that there is no 'battle rattle' meaning that no BBs can be heard rattle around in the mag during skirmishes unlike high-cap magazines.

Holding 70 rounds, this mag has a somewhat unique design as it has a smooth and glossy black aesthetic, that would complement more modern AK loadouts perfectly. The low price point only makes these mags that bit more appealing!

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

One of the best things about the Jing Gong LK58 Airsoft AEG series is its massive capacity yet short in length magazines, packing 500 rounds into a magazine that will still allow you to keep low in the woods and avoid getting hit. The LK58's 500rnd high-cap magazine is now available as a spare, meaning you can now rock a 1000 BB loadout with only two magazines!

This magazine is constructed with a steel shell and polymer internals and is a wheel or key wound high capacity magazine. The winding wheel can be found on the base plate, and for faster winding, the magazine can also be wound up using the included key, through the winding port on the right side of the magazine body. The fill window is located at the top of the magazine and can be opened by hand. This magazine is designed for the Jing Gong LK58 Airsoft AEG series.

An Airsoft magazine designed for use with Tokyo Marui's AK White Storm platform from the Recoil Shock NGRS range, with a design based upon the stamped steel style magazine used by the real steel rifles.

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

An Airsoft magazine designed for use with Tokyo Marui's AK White Storm platform from the Recoil Shock NGRS range, with a design based upon the stamped steel style magazine used by the real steel rifles.

A High Capacity Magazine for the Tokyo Marui Scorpion Mod.M Submachine Gun, that holds a total of 260rnds and is wound from the bottom of the Magazine as per any standard High Cap. To fill the Magazine, simply open the Fill Window at the top/front of the mag and pour your BBs in. Wind the clockwork wheel on the base of the mag to start feeding BBs into your gun.

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.