Airsoft Under £50

A compact red/green sight that weighs in at an amazing 55g, making it perfect for speedsofters and snap shooters alike!

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

A 1x red dot sight, providing a red dot for aiming. This sight provides a red dot sight with no magnification which provides quick target aquisition whilst in the field, allowing for two eye open targeting. 

If you're seeking an affordable way to protect your ears from bangs in CQB, the Earmor M300 Electronic Headset is a fine choice! A more affordable alternative to the full-fat M32 Headset, the M300 is available in two versions, the M300A and the M300T. The A version is designed to protect the ears from sudden, loud noises and enhance quiet noises and the T version has the same superb features with Bluetooth connectivity thrown into the mix. 

If you are a midcap user you will know all too well the struggle to quickly reload your magazines between games. Thankfully, NUPROL has the answer! Introducing the 3000rnd BB loader, a design based on existing crank-operated speedloaders but in a more compact form with almost double the capacity!

Whether you are a sniper, stalking the woodlands, or you prefer to bomb it around a CQB sight in your Dye mask, a compact chest rig is a must have to increase your mobility on the field. The Patrol Chest Rig from 8 Fields Tactical provides a lightweight, compact rig which can be worn with its included shoulder harness or attached to a buckle-up plate carrier, providing room for up to 6 M4/AR15 magazines and 4 pistol magazines!

Whether you are a sniper, stalking the woodlands, or you prefer to bomb it around a CQB sight in your Dye mask, a compact chest rig is a must have to increase your mobility on the field. The Patrol Chest Rig from 8 Fields Tactical provides a lightweight, compact rig which can be worn with its included shoulder harness or attached to a buckle-up plate carrier, providing room for up to 6 M4/AR15 magazines and 4 pistol magazines!

Whether you are a sniper, stalking the woodlands, or you prefer to bomb it around a CQB sight in your Dye mask, a compact chest rig is a must have to increase your mobility on the field. The Patrol Chest Rig from 8 Fields Tactical provides a lightweight, compact rig which can be worn with its included shoulder harness or attached to a buckle-up plate carrier, providing room for up to 6 M4/AR15 magazines and 4 pistol magazines!

Whether you are a sniper, stalking the woodlands, or you prefer to bomb it around a CQB sight in your Dye mask, a compact chest rig is a must have to increase your mobility on the field. The Patrol Chest Rig from 8 Fields Tactical provides a lightweight, compact rig which can be worn with its included shoulder harness or attached to a buckle-up plate carrier, providing room for up to 6 M4/AR15 magazines and 4 pistol magazines!

Whether you are a sniper, stalking the woodlands, or you prefer to bomb it around a CQB sight in your Dye mask, a compact chest rig is a must have to increase your mobility on the field. The Patrol Chest Rig from 8 Fields Tactical provides a lightweight, compact rig which can be worn with its included shoulder harness or attached to a buckle-up plate carrier, providing room for up to 6 M4/AR15 magazines and 4 pistol magazines!

Whether you are a sniper, stalking the woodlands, or you prefer to bomb it around a CQB sight in your Dye mask, a compact chest rig is a must have to increase your mobility on the field. The Patrol Chest Rig from 8 Fields Tactical provides a lightweight, compact rig which can be worn with its included shoulder harness or attached to a buckle-up plate carrier, providing room for up to 6 M4/AR15 magazines and 4 pistol magazines!

If you're running your VMP-1 SMG as a backup or cutting about with the beastly VMP-2D or MD, the VORSK 20rnd Short Gas Magazine for VMP GBB Series is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol or need compact mags to suit your VMP-2D or VMP-2MD DMR, these are what you need!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

If you want your Hasta Hard Case to look the business and you've treated yourself to some Shadow Foam, you need this cutting kit to get the perfect finish! The regular kit includes a scalpel, blades, anti-cut gloves and forceps. The Pro kit includes all that as well as a foam smoothing spinner, foam repair glue and an 18mm Snap-off Blade Knife. This is everything you need to get a clean cut whilst working on your Shadow Foam.

Remember to stay safe whilst using your cutting kit, and make sure to wear cut-resistant gloves. When attaching a blade to the scalpel handle, use the forceps. The package also comes with some instructions and there is a QR code on the box that takes you to a How-to video.

The basic kit is a great budget way to cut your foam out cleanly but if you want a seriously professional finish, we recommend the pro kit for an all-inclusive bundle of Shadow Foam cutting greatness!

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

The Military Knee and Elbow Pads set from EmersonGear provide heavily padded externally worn knee and elbow protection, with polymer reinforcement on the exterior. The pads are secured via one elastic strap and one nylon strap, allowing you a decent amount of flexibility when running and preventing the pads from slipping down. One of the best features of these pads is the extended section below the polymer reinforcement, which functions to protect your forearm/shin and help ensure your knee/elbow is protected should the pads shift. The polymer reinforcement on the outside also facilitates knee sliding, if you are the "showy" type!

A replacement, spare or 'special treat' magazine for your gas-powered EU Series pistol, which holds a frightening 50rnds to keep your sidearm blazing throughout the day.

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

If you like the styling of real steel holographic sights, the Delta Armory Holo-551 Style Red Dot Sight is one to watch. Patterned after the real steel 551 holographic sight, the Holo-551 is the shorter alternative to the Holo-552, ideal for compact platforms with limited rail space. Boasting an integral 20mm Picatinny rail mount, red and green reticle illumination with 5 brightness levels for each colour, the Holo-551 provides the same superb utility as the Holo-552 without wasting space on your primary. 

Benefitting from a strong alloy hood protecting the delicate internals, the holographic sight design is often credited with being one of the more robust red dot designs on the market, insulating you against accidental bumps and scrapes, unlike other "open" red dot designs. If you're an aggressive, or dare we say it, clumsy skirmisher, this could save you some anguish! If you're looking for a holographic-style optic for your SMG-5, AR-9 or other compact SMG, this is the one to go for!

A set of Full Torso Body Armour, and is a replica of the Standard Body Armour used by U.S Special Forces, such as DELTA and the Navy SEALS.  

A set of Full Torso Body Armour, and is a replica of the Standard Body Armour used by U.S Special Forces, such as DELTA and the Navy SEALS.  

A set of Full Torso Body Armour, and is a replica of the Standard Body Armour used by U.S Special Forces, such as DELTA and the Navy SEALS.  

A set of Full Torso Body Armour, and is a replica of the Standard Body Armour used by U.S Special Forces, such as DELTA and the Navy SEALS.  

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.