Airsoft Under £50

A LiPo crane stock battery designed to fit in crane and solid stocks, where other batteries would be wasting the available space.

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

The Victoptics 1x35 RD Scope is a Red Dot Sight for Airsoft Guns, attached via the integrated 20mm RIS/RAS Mount. The Sight features a 5MOA Target Dot, meaning it will cover 5" of space at 100 yards. The Aim Point can be adjusted for Windage and Elevation, using a Flat Head Screwdriver, ensuring you can align your BBs with the Target Dot.

If you're looking for comfortable full-face protection which won't break the bank, the JT Premise Full Face Airsoft Mask should be on your shopping list! Designed to protect against paintballs and Airsoft BBs, this full-face mask covers your entire face, from the chin right up to the forehead, held firmly in place with an adjustable elastic head strap and an adjustable chinstrap for extra security. 

The pre-installed anti-fog lens is a single pane example made from polycarbonate, but can be swapped out for any aftermarket lens from the JT Spectra lens lineup. The internal foam padding can also be swapped out without tools, meaning if your well-used mask doesn't have to be replaced, simply swap the foam for a fresher experience! 

With a wide range of adjustments suitable for child-sized heads right up to full adult melons, the JT Premise Full Face Airsoft Mask makes a great first face protection setup or a fantastic loaner for when your mates want to get involved. If you prefer the security and comfort of single-piece face protection, the JT Premise Full Face Airsoft Mask will serve you well!

Unleash your inner Operator! These Combat Airsoft Shirts were made with three priorities in order... They need to look awesome, be comfortable, and reliable enough to survive even the roughest use in the great outdoors. Even if not being used for Airsoft, they make great shirts for everyday use.

Unleash your inner Operator! These Combat Airsoft Shirts were made with three priorities in order... They need to look awesome, be comfortable, and reliable enough to survive even the roughest use in the great outdoors. Even if not being used for Airsoft, they make great shirts for everyday use.

Unleash your inner Operator! These Combat Airsoft Shirts were made with three priorities in order... They need to look awesome, be comfortable, and reliable enough to survive even the roughest use in the great outdoors. Even if not being used for Airsoft, they make great shirts for everyday use.

If you want to turn your version 2 gearbox-equipped AEG into a true space gun, the Delta Armory EAGLE™ Programmable MOSFET Control Unit is one of the most affordable ways to do it. The EAGLE™ is compatible with any Airsoft AEG which uses a version 2 gearbox and improves trigger response and rate of fire through its gains in electrical efficiency, amongst its many other benefits!

The EAGLE™ offers more programmable options than many of its rivals in the cheap MOSFET game. These include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, 5 levels of trigger sensitivity adjustment and adjustable pre-cocking, with 6 levels to choose from. Active braking can also be turned on or off and all programmable options can be set using the trigger and fire selector of your AEG, avoiding the additional expense of needing an app or PC connectivity to take advantage of the wealth of programmable options available. 

Naturally, the EAGLE™ will require a certain amount of skill and expertise to install so if this is your first time, we recommend consulting an experienced technician. Compatibility-wise, the EAGLE™ is designed for M4/AR-15 version 2 gearboxes specifically and should be compatible with most V2 gearbox shells on the market, though we have not yet confirmed whether it will work with G3 and SMG-5 platforms. If you're looking for an affordable way to add fancy features to your M4/AR-15 AEG, the EAGLE™ Programmable MOSFET Control Unit from Delta Armory is exactly that!

Finding your P90 is running out of ammo before you're done shooting? Maybe you think your P90 just isn't quite ugly enough? Just bought a P90, have no mags but a pile of old M4 highcaps? This magazine solution from CYMA will make you all happy. Huge Capacity to help you dominate the field, borrow your boring AR user mates magazines and hose the enemy down with a support weapon that fits in your pocket, the CYMA Mag adaptor Box mag is doing double duty!

If you're in search of a magnified rifle scope but want something lighter and more compact, set your sights on the Delta Armory 4x32AOEG Illuminated Rifle Scope. Packaged with a pair of 25mm scope rings for 20mm Picatinny rails, the 4x32AOEG is ready to mount on any Airsoft gun with a 20mm top rail but is ideally suited to longer-ranged platforms such as DMRs and sniper rifles. 

Many Airsoft optics provide far more magnification than needed and a side effect of this is tremendous overall length and excessive weight. The Delta Armory 4x32AOEG gives you only what you need to get a clear sight picture at Airsoft ranges, including windage and elevation adjustment and a parallax adjustment ring surrounding the objective lens. The reticle can also be illuminated for maximum visibility, offering the choice of red or green illumination with 5 brightness settings for each colour. 

If you're the type of DMR or sniper rifle user who doesn't need an optic capable of viewing Venus to get the job done, opting instead to focus on agility and in-game functionality, this is the scope for you!

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

Need some extra firepower for your AK AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic and is a low-profile alternative to full-sized AK drums, allowing you to get lower in the prone position to make the most of the surrounding cover.

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

An Airsoft Red dot sight created by THETA OPTICS which is designed to be fit onto 20mm RIS / RAS Rails to make aiming your gun easier or quicker. The sight projects a red dot using a laser on to the front glass lens which once zeroed will be where the pistol will shoot no matter the angle at which you can see the dot, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game.

This sight is perfect for any Airsoft Skirmisher who is looking for a red dot sight which has a low profile on their replica, or for those with ultra compact CQB weapons are looking for a lightweight sight which won't overpower their weapon.

Become one with your surroundings and blend in like nobody else for an unparalleled sniping experience. Novritsch brings their Airsoft sniping expertise to the world of camouflage to take your gameplay to the next level. The 3D Camo Cover is a realistic rifle wrap, which is stretchable and fully adjustable to cover both your scope and rifle, without getting in the way of your controls or vision.

Designed for use with L96 style rifles, the cover is easily applied and tightened around your gun using the adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle eyed of opponents.

The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

Become one with your surroundings and blend in like nobody else for an unparalleled sniping experience. Novritsch brings their Airsoft sniping expertise to the world of camouflage to take your gameplay to the next level. The 3D Camo Cover is a realistic rifle wrap, which is stretchable and fully adjustable to cover both your scope and rifle, without getting in the way of your controls or vision.

Designed for use with L96 style rifles, the cover is easily applied and tightened around your gun using the adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle eyed of opponents.

The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

A lightweight chest rig designed to carry as much equipment as possible, whilst reducing size, allowing the user to move quicker and be more agile in tactical situations. 

A lightweight chest rig designed to carry as much equipment as possible, whilst reducing size, allowing the user to move quicker and be more agile in tactical situations. 

A lightweight chest rig designed to carry as much equipment as possible, whilst reducing size, allowing the user to move quicker and be more agile in tactical situations. 

A lightweight chest rig designed to carry as much equipment as possible, whilst reducing size, allowing the user to move quicker and be more agile in tactical situations. 

If you want glowing BBs without making your primary any longer, the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs is a great shout! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM.097 series and other CYMA Platinum M4/AR-15 AEGs, this unit should work with most M4/AR-15 AEGs on the market, potentially requiring modifications to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your CQB primary with the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs?

Finally! A 50rnd Extended Magazine for EU-Series gas pistols, which accepts a 12g CO2 Sparklet! This means that even on the coldest days, your 50rnd Magazine can be put through your pistol without issue. The strong performance of CO2 should ensure that you can blast through an entire magazine, and have a great time doing it.

Designed and built to work in tandem with Amomax's holster and pouch system, allowing the attachment of Holsters to the platform in any configuration, allowing you to bring your A-game to any skirmish customising, depending on the objectives.

For those of you looking for a budget friendly sidearm, the ST92F make for a great backup pistol, being both lightweight and quiet due to it being non-blowback.

Constructed from lightweight but high density polymer, the pistol features a TDC adjustable HOP which is unusual for a sidearm at this price range.

If you're looking for a new combat shirt for colder weather or more protection than a UBACS, the Novritsch ASU Field Shirt is ideal. Constructed from a 65% polyester 35% cotton mix, this shirt design is based on the real steel "ACU Cut" shirt made for the US Army and copied by numerous militaries around the world. The design includes velcro-secured cuffs, a velcro-secured collar, and bladed chest and arm pockets for easy access when wearing webbing or a plate carrier. 

The advantage of a field shirt is its thicker material on the chest, keeping you warmer in cold weather and providing a bit of extra protection to take the sting out of BB hits. Available in a multitude of different camo patterns and the perfect pairing for the Novritsch ASU Combat Pants, the ASU Field Shirt is ideal for those who don't like the tight fit or thin material of UBAC shirts!