All Two-Tone Airsoft Guns

A Gas Blowback Airsoft 6mm BB Pistol, which has been designed and created based off the CZ P-09 Duty and fully licensed by CZ from Czech Republic. The Pistol externally is constructed almost entirely from Polymer, with a Polymer Slide and Frame, but features Alloy Sights and Internals.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 19 gen4. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you're in the market for a new CQB primary and need a full metal build with a fancy programmable MOSFET, your standards are certainly high! Lucky for you, Delta Armory has what you need with the DA-A18-EGL ALPHA™ TALOS 3 PDW M4/AR-15 AEG!

This full metal M4/AR-15 AEG boasts full metal externals with the ultra-modern Delta Armory receiver design, a sleek and compact PDW stock and the Delta Armory EAGLE™ programmable MOSFET at the heart of the internals, offering the option of burst mode, binary trigger, semi-auto only, sniper delay, progressive trigger (AUG mode), precocking and trigger sensitivity adjustment. A seriously advanced bit of kit, the EAGLE allows you to program all of these modes using the trigger and fire selector only, with no need for apps, programming cards or other hidden costs!

The EAGLE™ joins the reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings, SHS piston and tappet plate, and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, resulting in a superb firing experience with far more pre-upgraded parts than a platform in this price range deserves! If you like to move fast in CQB with a full metal primary, the Delta Armory DA-A18-EGL ALPHA™ TALOS 3 PDW M4/AR-15 AEG is the ideal primary!

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

If you are wanting to get into Airsoft skirmishing, look no further than the CM.125, a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent.

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into action right away.

Constructed with an alloy mock slide and polymer frame, the CM.125 is lightweight and efficient at both semi and full auto, this pistol has everything you need to get started with your first Airsoft sidearm!

If you're searching for a top-tier primary you'll never need to upgrade, get eyes on the Novritsch SSR4 Mk2 M4/AR-15 AEG! This is the latest iteration of the SSR4, boasting a fresh new look with its unique receiver, handguard and muzzle brake design with all the best bits from the original game-changing SSR4 platform.

Inside, you'll find CNC steel 16:1 gears, a 30K high-torque motor, CNC aluminium compression parts and a 6.03mm tightbore inner barrel paired with a rotary TDC HOP-up unit, just like the original. What's changed? The Mk2 boasts a super-strong reinforced gearbox shell and modular adjustable trigger system, resulting in a longer lifespan and more customization options than ever before!

On the outside, a lot has changed, including a new magnetic dust cover for more convenient HOP-up adjustment, a new buffer tube mount design which allows for easier access to the quick change spring system, not to mention the exterior design which leans into the Novritsch aesthetic with its dynamic swept back handguard and muzzle brake design. If you're after an M4/AR-15 platform with proven internals designed for pure skirmish performance and packed with user-friendly features, the Novritsch SSR4 Mk2 M4/AR-15 AEG is the one!

If you're sick to death of M4/AR-15 AEGs, who can blame you? The Novritsch SSR77 A2 AUG AEG is a breath of fresh air, based on the old-school-cool AUG design with modern attachment interfaces and pre-upgraded internals throughout, ideal for the skirmisher who wants a unique primary platform with performance to match the latest M4 AEGs to hit the market.

On the outside, the SSR77 A2 is dressed to impress, boasting a unique CNC aluminium M-LOK handguard, reduced profile upper 20mm Picatinny rail and a pair of QD sling sockets on each side, ready to be decked out like the most cutting edge M4s. Inside, things are even more impressive! This is one of the first AUG replicas to hit the market with a programmable MOSFET pre-installed, meaning SSR77 owners can join the SSR4, UTR45 and Gate TITAN owners enjoying burst mode, binary trigger and several levels of pre-cocking adjustment. If you've ever mourned that all the sick technology is in M4 replicas, the SSR77 A2 AUG AEG should put a smile back on your face!

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

If you have been looking for the best GLOCK 17 replica around, you will want to consider this! The GLOCK 17 Ultimate Edition from Umarex is the most realistic Glock Airsoft replica on the market by a significant margin. This Glock sports a CNC machined steel slide which is absolutely 1:1 with the real GLOCK 17, unlike others which are GLOCK 21 sized. The outer barrel is also steel, and the magazine is polymer! The result is a GLOCK replica unlike any other, with a completely different feel which perfectly matches the balance and handling of the real thing. This is the Ultimate Glock for collectors!

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

Straight out the insanely popular video games series Resident Evil, this pistol makes sure you're ready for the inevitable zombie apocalypse (or zombie themed skirmish).

With full metal construction and flashy silver slide, the Biohazard comes with a whole host of features including an aggressive muzzle device, front Picatinny rail, de-cocker and extended mag.

Zombies or no zombies, this pistol will leave the competition dead and buried.

A modernised AK-74 6mm Airsoft AEG Replica, with a ergonomic polymer Hand Guard, Moulded Grip and folding Solid Stock. The Rifle is constructed with an Alloy body, with Polymer Hand Guard, Grip and Stock.

Based on the EU Series of pistols, this replica is part of the VORSK EU range of pistols. It has an integrated Red Dot Sight which aids in rapid target acquisition and makes it stand apart from others like it, as well as a Full Automatic setting and realistic Gas Recoil to keep the enemy at bay.

Introducing Perfection, The UMAREX GLOCK 17.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 17 Co2 Deluxe kit. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals.

With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic.

What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!

If you're into revolvers and seeking an affordable way to satisfy your need, the HFC HG-132B Python 4" NBB Gas Revolver is ideal. This green gas-powered non-blowback revolver is styled after the real steel Colt Python and operates just like the real thing, with a rotating cylinder, removable shells and a functional double action/single action trigger.

Being a revolver, the HG-132B will be a challenge to use in-game, and its lack of a HOP-up and relatively low FPS mean it is definitely more suitable for CQB than taking out targets at long range. Being constructed primarily from high-density polymer with an alloy outer barrel makes the HG-132B nice and light, leaning into its role as a last-ditch skirmish backup. If you have revolver fever but don't want to spend big to fill that void, the HFC HG-132B Python 4" NBB Gas Revolver is the best way to go!

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA MOSFET Edition line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a type 1 cylinder and a polymer piston with a full steel tooth rack. Tying this selection of high-end internals together is the CYMA Zeus MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

A spring powered pump action 6mm BB Airsoft shotgun, designed to function like a real shotgun for use in Airsoft skirmishes and events.

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

A super compact Airsoft Single Shot 6mm BB Shotgun, based on the M870 designed for Breaching through doors and going into buildings.

For all you secret agents out there, looking for a concealed carry, this is the one for you. But don't let it's compact size fool you, it still packs a punch with a satisfying gas blowback recoil.

This 1911 style pistol from Army Armament, which is ideal for those who love a lightweight, compact design and is also perfect for roleplay skirmishes.

For all you secret agents out there, looking for a concealed carry, this is the one for you. But don't let it's compact size fool you, it still packs a punch with a satisfying gas blowback recoil.

This 1911 style pistol from Army Armament, which is ideal for those who love a lightweight, compact design and is also perfect for roleplay skirmishes.

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

Looking to get into the sport and start skirmishing? The iconic style of the F226 might be up your street.

Electrically powered, with both semi and fully automatic functionality, the pistol also sports a 20mm RIS / RAS rail to accommodate a wealth of tactical accessories for those more spec ops style missions.

If you are looking for a secondary weapon with a bit more "oomph" than a pistol, the M56B has your name on it! This pistol grip equipped breaching shotgun fires 3 BBs per trigger pull, giving you a realistic shotgun-like spread pattern to ensure you can hit those fast-moving targets in CQB. This shotgun is constructed with an alloy outer barrel and mock magazine tube, and a polymer receiver with a rubberised pump and pistol grip. The short overall length of this shotgun makes it perfect to be carried in a back scabbard and whipped out when there are rooms to be cleared.