All Two-Tone Airsoft Guns

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

Fitted with a tactical sliding stock for enhanced practicality in urban environments, this is a pump action, single shot spring powered shotgun. Please note that the FPS on this shot gun is over the standard 350 and will not be allowed in most CQB sites but can be used outdoor as a dmr platform

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

If you're into the race gun look and the performance advantages which come with it, you'll be a big fan of the P06 Slipstream EU17 Gas Blowback Pistol from Delta Armory! Boasting full metal construction, a dynamic weight-reduced ported slide, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, this EU series comes customised straight out of the box with stylish, elite looks.

The P06 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

If you prefer speedy styling over standard mil-spec sidearms, the P06 Slipstream EU17 Gas Blowback Pistol is the Delta Armory pistol for you. With a super-slick external design inspired by the best real steel pistols on the market, the P06 Slipstream looks far more expensive than it actually is!

If you're into the race gun look and the performance advantages which come with it, you'll be a big fan of the P06 Slipstream EU17 Gas Blowback Pistol from Delta Armory! Boasting full metal construction, a dynamic weight-reduced ported slide, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, this EU series comes customised straight out of the box with stylish, elite looks.

The P06 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

If you prefer speedy styling over standard mil-spec sidearms, the P06 Slipstream EU17 Gas Blowback Pistol is the Delta Armory pistol for you. With a super-slick external design inspired by the best real steel pistols on the market, the P06 Slipstream looks far more expensive than it actually is!

If you fancy trying the sniper playstyle and you are into your military platforms, the CYMA CM.702 M24 should suit you perfectly. This spring bolt action sniper rifle is based on the real steel M24 SWS, the primary sniper rifle of the US Army and many Law Enforcement agencies in the US. The M24 marries the classic bolt action sniper rifle styling with enhancements which set it apart from VSR-10-based rifles, including its M700 style "long action" and its adjustable stock.

The CYMA CM.702 is based on the Classic Army CA/M24 internally and boasts a 6.03mm tightbore inner barrel straight out of the box, hitting out at an impressive 500FPS +/- 10% using 0.2g BBs. Packaged with a 14mm CCW male thread adapter and with a bipod lug and scope rail built-in, the CM.702 is ready to be kitted out with whatever you need to complete your mission!

If you're looking for a unique compact sidearm, the WE Makarov PMM GBB Pistol w/ Silencer should suit you well! This full metal Makarov PMM replica is supplied with a compact suppressor and threaded inner barrel extension, giving you the sneaky look and the option to boost FPS by adding the inner barrel extension. 

The real steel Makarov PMM was conceived in the 1990s as a modernisation of the Soviet-era Makarov PM, the Eastern equivalent to the Walther PPK. The PMM variant added a higher capacity magazine and new ergonomic grip panels but maintained all of the unique Makarov features, including its double action/single action trigger and sleek, snag reducing slide. 

A small sidearm with a big bang thanks to its ferocious gas blowback recoil and full metal build, the Makarov PMM definitely stands out amongst the hoards of Hi-Capa and Glock-wielding skirmishers. Whether you need a sidearm for your Russian mobster look or you want a change from the usual Western designs, the WE Makarov PMM GBB Pistol w/ Silencer should be your sidearm of choice!

If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.

The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!

The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.

Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!

If you're looking for a unique compact sidearm, the WE Makarov PMM GBB Pistol w/ Silencer should suit you well! This full metal Makarov PMM replica is supplied with a compact suppressor and threaded inner barrel extension, giving you the sneaky look and the option to boost FPS by adding the inner barrel extension. 

The real steel Makarov PMM was conceived in the 1990s as a modernisation of the Soviet-era Makarov PM, the Eastern equivalent to the Walther PPK. The PMM variant added a higher capacity magazine and new ergonomic grip panels but maintained all of the unique Makarov features, including its double action/single action trigger and sleek, snag reducing slide. 

A small sidearm with a big bang thanks to its ferocious gas blowback recoil and full metal build, the Makarov PMM definitely stands out amongst the hoards of Hi-Capa and Glock-wielding skirmishers. Whether you need a sidearm for your Russian mobster look or you want a change from the usual Western designs, the WE Makarov PMM GBB Pistol w/ Silencer should be your sidearm of choice!

An Airsoft 6mm BB Gun, designed and built to look and be a functional replica of an AK74 Assault Rifle, but also features more modern body parts. The rifle is constructed mostly from Alloy, with an Alloy Receiver, Top Cover, Barrel, and Stock with Polymer Hand Guard and Grip.

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series.

This Gas Blowback Pistol is a Metal and Real Wood constructed 1911, that is fully licensed by Auto Ordnance. These Pistols are a collaboration between Cybergun, Auto Ordnance and Armourer Works to pay homage to all those who have served. There are a choice of three unique external designs to choose from, with each Pistol coming out the box with beautiful weathering and a welded/rivet steel plate effect that looks amazing. Each Pistol comes included with a strip of Sandpaper so that you can weather it to your own tastes too.

If you seek an M4/AR-15 platform with reinforced internals focussed on reliability, the Delta Armory DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG is one to watch. Constructed with a strong high-density polymer receiver and a CNC aluminium handguard, the DA-B06 is perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Inside the DA-B06, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a KeyMod handguard equipped with pre-installed 20mm rail sections and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

If you like your primary simple, reliable and accessory-ready, the DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG will do what you need it to, with plenty of upgrade options down the line thanks to its full TM AEG compatibility. At the ideal length to contend with tight corners in CQB and distant enemies outdoors, the DA-B06 is a fantastic multi-role platform!

A Pump Action Airsoft 6mm BB Tri-Shot Shotgun licensed by Action Sports Games from FRANCHI to provide one of the most iconic shotguns around, the SPAS-12 Shotgun.

If you're looking for a hog-killing time in the futuristic Wild West or desperately need a rifle to hunt a T-rex, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Cowboy is the companion you need! This metal lever-action has taken an extra step to realism, ejecting shells each time the action is worked, just like the real Winchester M1887 shotgun of the old West. This space cowboy version is a futuristic facelift for a classic gun and is perfect for any unique loadout looking for an equally as unique rifle.

The Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, a shortened 20-inch barrel, a 5-shell magazine tube, an M-LOK handguard and a 2-shell holder making it a fantastic primary for future wasteland load-outs and space-age Cowboys.

If your tastes are different, you love the realism of shell ejecting and enjoy watching the shells tumble on the ground from the action of your primary, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Cowboy will give you the thrilling, unique experience you crave!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're into the British Army look, this should be your primary! The Ares SA80/L85A3 AEG; Deluxe Standard Issue Set includes everything you'll need to recreate the iconic L85A3 rifle as it is issued to the British Army, including a fantastic replica of the ELCAN Specter LDS 4x optic with the Shield RMS piggyback red dot sight and a Grip Pod replica in desert tan.

Just like the standard version, this beast boasts full metal construction and incredible attention to detail, making it as suitable for skirmishing as it is for display in a museum! The lower and upper receivers are both made from stamped steel, with the modernised A3 handguard and 20mm Picatinny top rail being CNC machined from aluminium for a flawless form and perfectly in-spec attachment interfaces.

Inside, the L85A3 is based around a unique gearbox shell with the Ares EFCS MOSFET, providing programmable fire controls through the Ares EFCS Programming Box (available separately) and preventing trigger lock-ups for a ferocious semi-auto response rate. A high torque motor drives the 18:1 steel gearset, allowing for stronger springs to be installed and further improving trigger response. To add a side of realism to the firing experience, the L85A3 also boasts an electric blowback system, cycling the mock bolt carrier back and forth with each shot and drowning out the gearbox report with a violent "clack-clack-clack".

If you're working on a modern British Army loadout and need a primary to finish it off, you can't ask for much better than the Ares SA80/L85A3 AEG; Deluxe Standard Issue Set. With the correct optic and vertical grip, 2 magazines and a superb quality hard case to store it all in, this is the L85A3 replica package for the skirmisher who wants the most realistic look without any problems sourcing the correct bits!

If you're on a tight budget and need a sidearm with style, the Army Armament R30-3B 1911 Square Cut Custom GBB Pistol is a fine choice. Sporting a full metal build with a uniquely stylish square-ported slide, this 1911 really stands out next to its WW2 veteran siblings with improved gas efficiency and a big advantage when it comes to wet weather handling and gloved use.

Internally, the 1911 Square Cut Custom is based on the Tokyo Marui 1911 design, giving it access to a vast aftermarket of upgrades and plenty of options when it comes to customisation. The external build is far better than you might think for a pistol at this price point, boasting crisp machining and the weighty, realistic feel a proper replica needs. If you're equipping yourself with a budget sidearm and want something that really pops, the Army Armament R30-3B 1911 Square Cut Custom GBB Pistol will do the trick!

If you're on a tight budget and need a sidearm with style, the Army Armament R30-3B 1911 Square Cut Custom GBB Pistol is a fine choice. Sporting a full metal build with a uniquely stylish square-ported slide, this 1911 really stands out next to its WW2 veteran siblings with improved gas efficiency and a big advantage when it comes to wet weather handling and gloved use.

Internally, the 1911 Square Cut Custom is based on the Tokyo Marui 1911 design, giving it access to a vast aftermarket of upgrades and plenty of options when it comes to customisation. The external build is far better than you might think for a pistol at this price point, boasting crisp machining and the weighty, realistic feel a proper replica needs. If you're equipping yourself with a budget sidearm and want something that really pops, the Army Armament R30-3B 1911 Square Cut Custom GBB Pistol will do the trick!

If you need more firepower without extra length, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty is ideal. Based on the real steel M203 grenade launcher used by Arnie in Predator and serving with the US Army from the late Vietnam War right up until the present day, this M203 is the "Super Shorty" version, even shorter than the "Short" version and ideal for compact SMGs and short-barrelled rifles. The pre-installed mount is a QD example for 20mm Picatinny rails, meaning you can quickly mount it and remove it in seconds depending on the situation at hand.

Like other Airsoft M203s, the A&K Super Shorty uses 40mm MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, sending between 18 and 140 BBs downrange with a single pull of the trigger with a game-dominating spread, though specialised MOSCARTs which shoot different payloads are available. If you want to give your primary a more aggressive look with a firepower increase as a bonus, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty will give you what you need!

A CO2 powered authentic replica of the legendary British revolver. If you're in the market for an accurate replica of the MK VI, then look no further than this, affordable and accurate representation of the revolver which saw use from 1915 and well beyond the Second World War.

Please note this product is a 6mm BB Airsoft variant & not a 4.5mm / .177 Air gun.

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN MK16 SCAR-L 10-inch AEG! This full metal SCAR-L replica is flawlessly made, with some incredibly sharp machining paired with superb quality polymer parts in all the right places. This SCAR-L has a realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. It keeps your gearbox cycling at maximum efficiency and with pre-cocking set, you can achieve an incredibly snappy trigger response perfect for rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears, a quick change ball-bearing spring guide and a high-speed motor to top it off!

If you want a unique primary that boasts impressive internals for battlefield domination, the Cybergun FN MK16 SCAR-L 10-inch AEG is the rifle for you!

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

If you need a full metal sidearm with custom styling and entry-level pricing, you sure are picky! Thankfully, Delta Armory has met your demands with the P05 Tiger EU17 Gas Blowback Pistol. This GBB pistol is internally based on the Tokyo Marui EU17 system, giving it an almost unlimited aftermarket of customisation and upgrade options, though it's pretty darn custom as it comes! Fitted with a stylish custom slide based on the real steel ZEV SOCOM slide, the violent-looking sawtooth serrations really make this one stand out!

Completing the customised aesthetic, the P05 is also equipped with a super-grippy imitation hand-stippled frame, a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

Supplied in a hard polymer storage case complete with wave foam padding, the P05 is a generous package for those who like custom looks without all the fitting hassle. If you're into mean-looking pistols based on the best of the best in the real steel pistol world, the Delta Armory P05 Tiger EU17 Gas Blowback Pistol will definitely put a smile on your face!

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. 

On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

An iconic platform! The Novritsch SSR77 A1 AUG AEG is based on the Austrian standard-issue rifle, used by Christoph from Novritsch himself. It features a full metal construction, although, on an AUG that doesn't mean a lot of metal. The proportions of polymer to metal used for the SSR77 correspond perfectly with the iconic, real steel StG 77 AUG. Novritsch has once again proven that they are really thinking of the players, with its programmable electronic trigger unit, CNC Hop-Up chamber and an infinity flat-hop AEG bucking, the Novritsch SSR77 A1 AUG AEG is a treat for any Airsoft skirmisher!

The programmable electronic trigger unit features modes such as semi-auto, burst, binary, full auto deactivation and adjustable pre-cocking. The ability to alter fire modes makes the SSR77 A1 a very versatile platform and when combined with the lighter-weight high-density polymer, it makes for a premium rifle that is ready for both outdoor and CQB skirmishes. If you are looking for a rifle to complete your military look, or you simply want to get your hands on a great performing AUG, the Novritsch SSR77 A1 AUG AEG is one of the best Airsoft AUGs available on the market!

An electric powered 6mm Airsoft replica of the venerable G3 platform complete with integrated bipod, which was originally designed in the 1950s but has proven to be such a successful platform that it has seen updates all the way through to being in current use with military groups around the world.

Looking for something that stands out from the crowd of M4s and AKs? Here we have a rifle for those of a discerning taste. The LK58 from JG is a close replica of the real world FAL, a rifle that is often considered the western equivalent of the AK47, due to its widespread use throughout NATO during the cold war. The LK58 is modeled after the American civilian tactical FAL, the SA58, and has all the classic FAL features with a sprinkle of modernity for convenience.