Army Armament

The Army Armament R902 Aug Military Model Railed AEG is an iconic replica of the Austrian military rifle. It is certainly one to add to your assault rifle collection. It has also been seen in Australia and New Zealand and was also wielded by Karl, the mercenary companion to Hans Gruber during their attempted takeover of Nakatomi Headquarters in the 1988 movie Die Hard.

The R902 boasts full metal construction, a long inner barrel and an integrated 3x optical sight, it is a more modern iteration of the AUG with the addition of multiple 20mm rail sections for accessories not commonly associated with AUG platforms, such as flashlights, lasers and backup sights. Join the elite, equip yourself with an AUG and benefit from the improved handling, and the long barrel of this fantastic Airsoft AEG version of a near-perfect real-world design!

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

A set of Rubber Pistol Grips for Army Armament 1911 Gas Blowback Pistols, which comes as a one-piece design as seen on the R32, and are very easy to install. Simply undo the screws holding your current Pistol Grips into place (carefully removing them as there may be springs on the underside) and install the new set from the front.

An excellent addition for Airsofters with a 1911 as their sidearm, this is a 25 round capacity gas blowback magazine designed for the Army Armaments 1911, but is also compatible with many other designs. 

The R31-C Gas powered Airsoft Blowback Pistol is a replica of the infamous 1911 design, in traditional layout without any exuberant furniture, compensators or graphics, just good old fashioned, old school cool.

Don't worry, it won't bite! This AUG certainly defies the conventional style of most common assault rifles, even most AUGs themselves and they're pretty unconventional! It brings aggression and style to the battlefield, with a fierce front end, the muzzle device is sharp and pointy, menacing to look at and overall gives this AUG a hint of danger. This pairs with the handguard, which is styled to look like a set of jaws with sharp fangs, again, adding to the brutal look of this AEG.

As it is an AUG, it boasts some of the usual features that, like Marmite, you either love or hate. It boasts modern ergonomic features, ambidextrous controls and ultra-slick quick disassembly it's almost impossible to believe that the first AUG rifle was designed way back in 1977! It was known originally as the STG 77 when it was introduced to the Austrian service and it has been seen with numerous armed forces and police units around the world.

If you're looking for the hottest Taran Tactical Innovations platform around, the Army Armament Alpha Race Hi-Capa GBB Pistol is exactly that. Licenced by TTI and covered in gorgeous laser-engraved trademarks, this full-metal Hi-Capa is patterned after the real steel Alpha Race, the Pit Viper on steroids!

At the front, we have the mighty Alpha Race compensator, an extended version of the Sand Viper comp to provide that lean and mean high-speed race gun look. The grip boasts aggressive stipple texture and a substantial flared magazine well; both prerequisites of a pistol designed for pure speed against the clock.

Like Army Armament's other recent pistol releases, the Alpha Race is also equipped with a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability, meaning it is a bit of a beast straight out of the box! If your mates are all running TTI pistols and you want the biggest, baddest TTI pistol platform yet, the Army Armament Taran Tactical Innovations Alpha Race Hi-Capa GBB Pistol will make them all jealous!

If you've lost a safety catch for your Army Armament Hi-Capa, you're in luck! The Army Armament Ambidextrous Safety Catches for Hi-Capa GBB Pistols are constructed from alloy and an original replacement parts set, meaning you shouldn't have to carry out any mods when installed in an Army Armament Hi-Capa. The set includes both the left and right-hand manual safety catches. 

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.

If you would appreciate the large gas reservoir of a Hi-Capa, but shiny race pistols aren't your style, the R504 may be what you have been searching for. The R504 sports Hi-Capa parts compatibility and a large magazine, coupled with aggressive military styling, suppressor height sights, a pre-installed thread adapter, and a Red dot sight mount plate included in the box.

A silicone rubber seal designed to fit on the bottom of your Hi Capa magazine internally, to replace old and work out seals and reduce leaks. With a properly fit and lubricated seal you should never experience a leak again, just ensure you coat the seal in silicone based lubricant prior to fitting it, and be gentle! These things may snap under too much tension.

This hammer is an original replacement part for the Army Armament R601 JW3 GBB pistol but may also fit other Army Armaments Hi-capa based GBB pistols. A hammer is a great spare to have in the tool kit if you use your JW3 pistol heavily, as over time these tend to wear out due to the repeated impacts on the hammer with every shot. Having a spare hammer on hand for worst-case scenarios can help avoid disappointment and potentially a long wait for replacement parts and allow you to have your pistol back up and running quickly for its next outing.

If you have hammer issues with your Army Armament Hi-Capa, this should help! The Hammer and Strut for Hi-Capa GBB Pistols from Army Armament is constructed from Aluminium and an original replacement part for the Army Armament Hi-Capa GBB series, including the R501, R504, R603, R608, R609 and potentially others. The set includes both the hammer and hammer strut and should be compatible with most TM clone Hi-Capa pistols, though it may need mods for anything other than Army Armament 'Capas. 

Need to shoot faster with your 1911 GBB pistol? This is what you'll need! Compatible with any 1911 variant which has removable sights via a dovetail cut in the slide. Works great with a red fibre front sight.

A set of replacement/upgrade pistol grips for the Army Armament branded 1911 gas blowback pistols.

An upgrade or replacement stock sear spring for gas blowback pistols. The spring is made of robust steel and therefore will hold its shape better than stock springs, which is perfect for keeping your trigger action to be short and crisp. Due to the springs high tolerance, there would be no need to shave it down to fit in your grip.

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offer their AUG folding vertical grip as a spare part! The grip is constructed from high strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

If you lost a safety from your R28 or R32 1911 GBB pistol, this set should sort you out! The Army Armament Ambidextrous Safety Catches for R28/R32 1911 GBB Pistols includes both the left and right side safety catches, both of which are constructed from alloy. These safety catches are specifically designed for Army Armament 1911 platforms but are potentially compatible with other brands, though you may need to carry out modifications. 

Similar to their real world counterparts, the Army Armament R32 Mag Base provides a tough, large exterior baseplate for quicker mag dumps & better grip on reloads, plus they just plain look cool!

Providing a GBB Magazine capacity extension, a protective baseplate & a modern aesthetic the R32 Base Extension is a no brainer for the modern firearm fanatic.

Although this comes with an attachment screw and rubber O-ring, please be aware that this base plate does not come with a valve.

If you have an Army Armament 1911 GBB with a broken nozzle you are in luck! The Army Armament Nozzle for 1911 GBB Pistol is a replacement original part designed for the Army Armament 1911 GBB series, including the R26, R28, R31 and R32 pistols. This nozzle may also work with TM-compatible 1911 pistols from other brands, but as always we only recommend brand mixing for the experts as this may require fine-tuning and modification.

If you are fixing up your Hi-capa or 1911 you might need one of these! The Slide Stop/Safety Spring and Plunger includes the dual purpose slide stop/safety spring and the plunger for each, making it the perfect replacement set for those who have lost or damaged these parts. All components in this set are constructed from steel, and are designed to fit the Army Armament 1911 and Hi-capa GBB pistols but may fit others based on the Tokyo Marui internal design. 

If you've had a mishap with your R36 GBBR or you want to keep spares handy just in case, the Army Armament Nozzle for R36 GBBR belongs in your toolbox! This is a replacement original part for the R36 GBBR series and may also fit WE AR36 GBBRs but we cannot confirm that. The set includes a polymer nozzle and a steel nozzle spring which is thoughtfully pre-installed, saving you some fiddling!

If you're looking for magazines for your Army Armament R36 GBBR or WE G39C AR36 GBBR go no further as you have found them! This magazine fits these rifles ONLY and is not compatible with other brands AR36 varients. It has a realistic weight and ammo capacity, making it perfect for military operation enthusiasts or those who like to skirmish as realistically as possible.

The mag is constructed with a high-density polymer shell with alloy internals and is loaded through the feed lips at the top of the mag body with a speed loader, preferably with a GBB adapter. The gas fill valve is on the bottom of the magazine and requires the polymer bottom cover to be slid off for access. The magazine is compatible with both green gas and red gas, ready for most weather conditions.

The polymer shell also features grooves on either side, which allow multiple magazines to be attached to one another for easier storage or faster reloads. keep your R36 in the fight for longer with some spare magazines and outgun all your opponents on the battlefield. This trusty mag is sure to withstand even the harshest of skirmishing conditions.

If you've lost your JW3 mag release, you're in luck! The Army Armament Magazine Release for R601 JW3 Hi-Capa GBB Pistols is a replacement original part for the R601 JW3 Hi-Capa GBB but should fit other Hi-Capa GBB pistols, potentially requiring modification. 

The mag release is constructed from alloy and is an extended design, meaning faster reloads and easy access for those with smaller hands. If you want an easy to reach mag release for your Army Armament Hi-Capa or you've been doing some mods and lost your JW3 mag release, this should sort you out!