Viewing 3 of 3.
From 861.99
  • Gate ASTER™ II Bluetooth MOSFET/ETU
  • Warhead Edition - 27K Brushless Motor
  • Prometheus Purple hop rubber

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

From 803.99
  • Pre-installed Gate ASTER™ ETU
  • Warhead Edition - 27K Brushless Motor
  • 4UANTUM Friction Pro High-Performance Hop Up Bucking installed

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

From 978.49
  • Full metal construction
  • Professionally tuned by Bolster Armouries
  • Gate ASTER™ MOSFET & Warhead 27K motor

Introducing the Bolster Tuned Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle, a professionally upgraded AEG platform based on the EMG N4 Shorty. Boasting many of the biggest names in aftermarket upgrade parts and put together by the same talented techs that brought you Bolster Armouries, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

The Tuned N4 Shorty builds upon the already impressive base platform and extracts the very best, removing any parts that don't make the cut. Adding in a plethora of low friction, high strength enhancements including an FPS Softair Air Seal Nozzle and Carbon Fibre Reinforced Tappet Plate, Bolster's own EZO bearings, M115 spring and stainless steel sector gear screws, a Laylax Hard Selector plate and the gorgeous Gate Quantum flat blade trigger; this N4 is kitted out to shred anything else it encounters on the field.

The HOP-up has been enhanced with the team's new favourite HOP-up bucking, the 4UANTUM Friction Pro High-Performance HOP-up Bucking, ensuring the N4 meets the Bolster benchmark for accuracy and range. The Gate EON CNC POWER HYBRID Piston Head is also inside, ensuring that consistency is flawless and air efficiency is peak.

The Quantum is paired with the advanced Gate ASTER™ MOSFET, offering 250 different trigger sensitivity settings, pre-cocking, programmable fire controls and much more via the Gate USB link or Gate Control Station app. To deliver the speed it needs to bury the original EMG CYMA Platinum N4 Shorty, the Bolster team saw fit to install the Warhead Base 27K Brushless motor, providing unparalleled heat dispersion qualities and speed to rival the very best.

The highly regarded PTS EPG Pistol Grip has also been added to set the Warhead at the perfect angle, not to mention enhance ergonomics. To reliably handle the raw power provided by the Warhead motor, the team added in Laylax EG 18:1 Hardened Steel Gears, known for their strength and longevity. While the original is impressive, the Bolster Tuned version is the next level up!

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock N4 Shorty to a technician and paid for this amount of work to be done. When we tested the Tuned N4, we were amazed. 347 FPS on the dot with remarkable consistency, 60 m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

About Bolster Tuned AEGs

Bolster Tuned AEGs are put together by the same talented technicians behind Bolster Armouries. With the objective of making the absolute best use of the stock parts in pre-upgraded AEGs, the Bolster techs keep the good parts and enhance them by giving the gears a professional shim job, cleaning the gearbox internals, polishing the engagement surfaces and adding a few choice internal upgrades to bring out the beast in our favourite AEG platforms. 

All Bolster Tuned AEGs are fitted with the Gate ASTER™ MOSFET which provides pre-cocking, programmable fire controls including burst mode and binary trigger capability, adjustable trigger sensitivity and massive improvements in electrical efficiency thanks to its use of high-tech optical sensors instead of conventional copper contacts. The ASTER™ is a true game-changer!

Bolster Tuned AEGs are built to an exacting standard, and if they can't reach out to 60 meters and above with 0.28g BBs and the HOP-up set, they are sent back to the workbench until they can. To make this high standard achievable, the team inspect the barrel of each AEG to be tuned, give them a thorough polish and install the impressive Prometheus Purple HOP-up bucking and nub to improve shot-to-shot consistency and provide a stronger HOP-up effect. 

If a full-fat Bolster Armouries AEG is a Bugatti Veyron, a Bolster Tuned AEG is a Mercedes AMG; a tuned-up premium platform that is a stone's throw from rivalling the performance of the world's best but can still be used for day-to-day duties by the common man!