CYMA Airsoft

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

If you are in the market for a new pistol grip and you are a CQB player, a PDW style grip with a refined angle is the best thing for the job! Introducing the PDW Pistol Grip for M4/AR15 AEG from CYMA, a high density polymer pistol grip with a more vertical angle than standard M4/AR15 grips, making it more suitable for use with modern shooting stances.

An Airsoft Electric Pistol which features a MOSFET for a rapid rate of fire and consistent performance.

If you're into the "Honey Badger" look, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU will definitely please you! Boasting full metal construction and an integral suppressor surrounded by a CNC aluminium M-LOK handguard, the CM.097D is rocking all the superb pre-upgraded components CYMA's Platinum series is known for with a more compact form and stealthy styling, ideal for CQB or fast moving, clandestine skirmishers!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

With top tier pre-upgraded internals and solid externals with a cutting edge aesthetic, the CM.097D is a beast in all aspects and its compact size lends itself well to fast moving, aggressive playstyles and close quarters environments. If you need a modern, full metal AR which will never need upgrading, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU is the one to go for!

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength.

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines.

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

If you're looking to give your CM.700/700A/708 sniper rifle a bit more range the CYMA spring upgrade set will be what you're after, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

An Airsoft Electric Pistol which is based on the Hi-Capa platform and offers a MOSFET for a terrifying rate of fire, making it the perfect dependable backup.

If your Tokyo Marui ZET system M4/AR-15 needs some steel to keep it strong, the CYMA CGS Adjustable Trigger Box for TM ZET System M4/AR-15 GBBR belongs on your shopping list! This complete trigger box is ready to drop in and contains full steel trigger components which should last practically forever in normal use. The box is compatible with both CYMA's CGS M4/AR-15 GBBR series and Tokyo Marui ZET system M4/AR-15 GBBRs. 

Along with its steel construction, the extra perk of this box is its ability to adjust the hammer stroke strength, translating into adjustable FPS by varying the force with which the hammer strikes the valve knocker. As always, we recommend internal upgrades only for those who are confident in how to install them, but with this trigger box being pre-built, most of the hard work has been done for you!

A highly convincing full metal 5.45x39mm AK variant electric Airsoft gun which is built to a realistic standard, and combines modern Polymer aesthetic with an old school folding skeleton stock.

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui.

If you've lost a selector switch for your Thompson AEG, or even both, CYMA have you covered! The Selectors Set for CM.033/051 are packaged as a pair and are compatible with CYMA's Thompson AEGs, both the M1A1 and M1928 Chicago Typewriter variants. The selectors are constructed from alloy and finished in matt black.

If you're the techy type looking to get your hands on affordable spares, the CYMA Tappet Plate for V3 Gearbox belongs in your bits box! This original replacement part is constructed from high-density polymer, designed for V3 gearbox-equipped AEG replicas such as the SMG-5K, AUG, AK and AR36. Whether you've got a platform to repair or you want to be ready in case anything fails, the CYMA Tappet Plate for V3 Gearbox is a handy part to have around!

If you've got an old AEG to repair, CYMA's 18:1 Steel Gear Set for V2/3 Gearbox might be the fix you need! This standard ratio gearset is made from steel and compatible with any version 2 or version 3 gearbox-equipped AEG. Being a standard 18:1 ratio set, these gears will turn once for every 18 motor revolutions, giving you a great balance between speed and torque.

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD.

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov.

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine.

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If your SMG-5 trigger is a bit worn out or you have a flat trigger inside and you want a more classic SMG-5 look, the CYMA Trigger for SMG-5 AEG is what you need. This trigger is only for SMG-5 AEGs which use a version 2 gearbox and will not fit the version 3 gearbox equipped SMG-5K and SMG-5PDW series. The trigger itself is constructed from alloy and has the curve of the original SMG-5 trigger, making for an appropriately realistic look. Included with the trigger is a trigger return spring, so if you have lost this part you're in luck!

if you're looking for a replacement Motor Cage for your TM-spec Thomspon AEG, you've just found one! The CYMA Motor Cage for CM.033/051 Thompson AEGs is a replacement original part from the CM.033/051 series and should fit most Thompson and Aliens M41A Pulse Rifle AEGs on the market, assuming they are Tokyo Marui spec internally. The set includes both sides of the motor cage but doesn't include screws so make sure you have these ready for installation. 

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!