CYMA Airsoft

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

If you're looking for a solid, modern M4/AR-15 AEG fitted with some of the best stock internals out there, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU is one to watch! The latest version of the original CM.097, this version is equipped with the EShooter Kestrel Basic ETU, the perfect compliment to its thoroughly upgraded Platinum E-Edition internals!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

On the outside, the CM.097A is very well equipped, ready to host M-LOK or 20mm Picatinny accessories and equipped with a 14mm CCW male threaded outer barrel, ready for your tracer unit or suppressor. If you like the sound of a solid, proven high-performance M4/AR-15 AEG made even better with advanced, programmable firemodes, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU will suit you perfectly!

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

If you are in the market for something with stealthy looks that is also remarkably quiet to shoot, check out the CM.070 M4SD from CYMA. This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, alloy rotary HOP-up unit, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. Coupled with the included suppressor, this AEG is practically as quiet as they come out of the box!

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The CYMA Ambidextrous Fire Selector Gears for CM.098 is a replacement original part set for the CM.098 series of SR-25 AEGs and includes the internal selector gears and axis for the CM.098 ambidextrous selector switches.

If you're looking for an ergonomic enhancement for your M4, the CYMA Enhanced Pistol Grip for M4/AR-15 AEG is a great affordable option! Made from robust high density polymer, this pistol grip is set at a more vertical angle than the average, making it fantastic for shooting with modern stances with the stock fully collapsed.

Each side is rocking dot texture, with additional linear texture on the front and rear, maximising gripping qualities for easy wet weather use. Compatibility-wise, this grip should fit almost every M4/AR-15 AEG on the market, provided it is based on the original TM M4 AEG internal and external design.

If you've had motor issues and need a cheap replacement, here you go! The CYMA High Torque Neodymium Magnet Motor; Long Shaft is a high-torque upgrade motor for M4/AR-15, SMG-5 (not K), M14, G3 and P90 AEGs. This is the perfect upgrade part if you want to crank up your trigger response for some snappy semi-auto work or increase torque to handle high-power springs. The set includes a pre-installed D-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If you've had motor issues and need a cheap replacement, here you go! The CYMA High Torque Neodymium Magnet Motor; Short Shaft is an upgraded high torque motor for AR36, AK-47/74, AUG and SG55x AEGs. This is the perfect upgrade part if you want to crank up your trigger response for some snappy semi-auto work or increase torque to handle high-power springs. The set includes a pre-installed D-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

If your collection is missing a shotgun, now would be the time! The CYMA CM.360LM M3 Super 90 Long is based on the legendary Tokyo Marui tri-shot shotgun design but with full metal construction and a few added details to refresh the old but proven tri-shot design. This is the Long variant of the M3 Super 90, known amongst Airsofters for its role in the movie Heat (1995) and known in the real steel world as one of the most advanced and high quality military/law enforcement shotguns ever devised.

Working with a shotgun, whether you are indoors or outdoors, has its own set of challenges; ideal for the CQB pro who is bored of getting easy kills with their AEG. Like the sniper in the woods, the shotgun-wielding skirmisher must choose their shots and time their reloads just right, though the shotgun provides the advantage of having a higher hit probability thanks to its tri-shot configuration and a faster first shot when entering a room. If you are ready to get your pump on, you can't do much better than CYMA's full metal tri-shot range!

An absolute pleasure to hold and shoot. Don't let the budget price tag put you off. This AK is rock solid and every shot is lovely and crisp. The wood is genuinely real and finished to a high quality with no fraying or splintering on any edges. 

This AKM Platform Airsoft Gun is powered by a battery in the stock and features realistic construction with Real Wood Furniture, as well as a Dovetail Side Rail for AK specific attachments.

An Electric Powered Airsoft AEG, designed to look like the MK12 Special Purpose Rifle which is currently in service and used by the US Navy SOCOM Units, and was built by CYMA with custom design elements added by P&J and is the perfect base for a DMR Rifle.

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The CYMA Tactical Extended Fire Selector Lever for AK47/74 AEG is constructed from stamped steel and is a modernised design with a cutout for the AK bolt handle and a ledge that can be used to select fire modes from a firing grip.

With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger. This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. A perfect item for any Tactical AK or PMC style custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use!

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags.

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

The Stainless Steel Cylinder for CM.701 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.701 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

If you like an aggressive military-style AR, the CYMA CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.04mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate XM177E1 sound and flash moderator and 2 position XM177 style stock, the CM.009D XM177E1 is the old school tacticool carbine from a time before the M4!

If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!

If you are building a version 3 AK gearbox or you have an old AK AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AK AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AK doing its dirty work once again!

This charger is a replacement original CYMA part intended to charge the mini LiPo batteries supplied with their MOSFET AEP series. The charger plugs into a USB port/USB plug socket and charges the battery through a 3 pin balance port.

If you have your sights set on a sniper rifle but want something with a more militant look, the CM.702B M24 from CYMA is exactly what you need. This spring bolt action sniper rifle is based on the real steel M24 SWS, the US Army's standard sniper rifle and comes equipped with a 6.03mm tightbore inner barrel straight out of the box!

As far as affordable sniper rifles go, this is one of the most consistent we have seen, hovering around the 500 FPS mark on 0.2g BBs with only a couple of FPS deviation between shots. While it isn't based on the VSR-10 system, it is compatible with upgrade parts for the Classic Army CA/M24 but for all but the most particular snipers, upgrades shouldn't be necessary. Just slap a scope on top and get busy from your hide in the woods!

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.