CYMA Airsoft

A full metal spring powered pump action Airsoft 6mm shotgun that is tri-barrelled and comes with a sawn-off style pistol grip as standard.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

If you need to mount a sling to your M4/AR-15 AEG, CYMA has just the thing! The Steel Ambidextrous Sling Plate for M4/AR-15 AEG is designed to mount between the buffer tube and receiver and should fit the vast majority of M4/AR-15 AEGs from various brands (Not BOLT, TM NGRS or GBBRs).

The plate is constructed from steel to provide ample strength to support even the heaviest of ARs and provides a sling loop on either side so you can set up your sling for either left or right-handed use. The sling loops should be compatible with most "hook" type slings and can be paired with a front sling point if you prefer a two-point sling setup.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

If you can't decide whether you want something modern or an AK, with the CYMA CM.103 AK Alfa you can have both! This AK has been modernised throughout to the point that it is barely recognisable as an AK, boasting an advanced side folding retractable stock similar to SCAR and ACR stocks, an aluminium monolithic upper receiver, plenty of 20mm Picatinny rails and ambidextrous controls across the design, allowing it to go toe to toe with the most modern platforms available to Airsofters.

As one of CYMA's Platinium Edition AEGs, the CM.103 is equipped with CYMA's pre-upgraded Platinum Edition gearbox, featuring 13:1 ratio high speed CNC steel gears, a high torque motor, and a MOSFET to allow for 11.1V battery use. The MOSFET also improves electrical efficiency which translates to even better performance down range and the high rate of fire and trigger response it provides pairs perfectly with the 6.03mm tightbore inner barrel and alloy HOP-up unit to create a true beast in the performance department.

If you are looking for a uniquely styled Airsoft AEG which hybridizes modern SCAR like construction with AK mag compatibility and CYMA Platinum performance, the CM.103 AK Alfa does all that while confusing even the veterans and drawing the eye of curious skirmishers wondering what on earth it is!

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

For those with a thing for the classic utilitarian style of the AK platform who need a rifle for CQB duties, the AKS-74U has your name on it! The CM.045 High-Speed from CYMA takes the original CM.045's superb externals and drops in a 13:1 steel gearset, high-speed motor, silent piston and cylinder head with a polycarbonate piston with steel teeth to provide a pre-upgraded speed demon of an AK! To sweeten the deal, this AKS-74U comes with authentic-looking "Plum" coloured polymer furniture and magazine, matching AKs built during the 1985-1989 era.

Whether you are upgrading your SMG-5 or repairing it, the CYMA CM.041G/CM.041H Complete Gearbox E-Edition High-Speed is a great excuse to do both at the same time! This gearbox is a Version 2, designed for CYMA CM.041 series SMG-5 AEGs but should fit most SMG-5 AEGs on the market (not SMG-5K) and also includes a high-speed motor of the long shaft variety.

As the heart of the CYMA E-Edition High-Speed Platinum AEG series, this gearbox is absolutely packed with upgraded parts. Highlights of the internals include the CYMA MOSFET/ETU system, steel high-speed 13:1 ratio gears, an aluminium silent piston head and cylinder head and a quick change spring system. Being a replacement original parts set, this gearbox is the exact setup found in the superb CM.041G and CM.041H AEGs, meaning if you have ever been envious of their performance you can now make your SMG-5 shoot just as nicely!

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

If you want to speed up your shotgun skills, this is a sure fire way to do it! The Cyma Front Fibre Optic Sight simply snap fits onto your barrel to provide a bright red glowing point of aim, without the need for batteries or power at all! This sight can either be used with a rear sight or on its own for up close and personal work.

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

A tough Polymer constructed magazine for a range of CYMA/WELL series Spring Sniper Rifles (check compatibility), which offers a whopping 100rnds to lay down on the enemy from afar. 

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

Constructed from alloy, this is an Airsoft AEG replica of the OTs-03 SVU ‘Dragunov’ bullpup sniper rifle, the successor to the legendary 'Dragunov' SVD, first seen used by the Russian Federation in the First Chechen War.

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate pencil barrel and 2 position XM177 style stock, the CM.009D M653 is the old school tacticool carbine from a time before the M4!

If you are searching for the best CQB platform out there, the CYMA Platinum SLR Airsoft Works AKS-74U AEG; Tracer HOP-up is definitely worth considering. Absolutely brimming with upgraded parts including a MOSFET, 13:1 CNC steel gears, CNC aluminium piston and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, this lil AK shoots like a laser and its built-in tracer HOP-up gives it an instinct aiming and psychological warfare advantage when exchanging fire at kissing distance.

Externally, the SLR AKS-74U definitely meets the high standards CYMA AKs are known for, with full metal construction including a steel receiver and top cover, CNC aluminium "Solo Krink" handguard, AK Billet stock and Synergy Mini-Comp with full licencing from SLR Rifleworks. The modern furniture enhances handling considerably and also allows modern accessories to be easily mounted, from suppressors to red dot sights, vertical grips and tactical flashlights.

Whether CQB is your poison or you have an aggressive playstyle and like to get right in the enemies' face, the CYMA Platinum SLR AKS-74U will be an asset to your arsenal. Built like a tank with almost as much firepower, don't let its size fool you, this compact AK comes with full-size performance!

If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!