Delta Armory Airsoft

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

If you're in search of the perfect mid-range scope then you are in luck! The Delta Armory 1.5-5X40BE LPVO Rifle scope w/ Flip-up lens caps is exactly what you are looking for. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1.5x up to 5x, ideal for short and medium-range engagements mounted on an assault rifle, DMR or sniper rifle. 

The 1.5-5X40BE offers windage and elevation adjustment via a pair of capped turrets, along with a choice of a red, green or blue reticle with 3 brightness settings and a fast focus dial at the rear of the eyeball so you can get a clear view at different engagement ranges. With a dual ring mount for 20mm Picatinny rails, this LPVO is ready to rock straight out of the box!

If you've been checking out LPVOs searching for the ideal stand-in for the KS-1 optic, the Delta Armory 1-6X24IR LPVO Rifle Scope is a great option. Measuring a mere 23.7cm approximately, this is the shortest "short dot" we have seen for this price and a fantastic affordable alternative to the currently unavailable Vortex 1-10 LPVO used on the British Army's latest service rifle, the L403A1 AIW. 

LPVOs are rapidly gaining in popularity, both in the real steel world and Airsoft, offering a does-it-all optic which is great for short-range and long-range scenarios. Whether you mount it on an assault rifle, DMR or sniper rifle, the 1-6X24IR LPVO Rifle Scope offers all the functionality you'll need along with superb eye relief for fast target acquisition and compatibility with goggles and face masks. 

Offering full adjustment for windage and elevation via locking tool-less adjustment turrets, red or green reticle illumination with 5 levels of brightness, a pre-installed dual ring mount for 20mm Picatinny rails and a generously included CR2032 battery to get your reticle glowing, the 1-6X24IR LPVO Rifle Scope is ready to tackle targets at any range and the perfect addition to any mid-range build, KS-1 or otherwise!

If you're looking for a red dot sight with a modern look, the Delta Armory Micro Red Dot Sight PRO with Riser should fit the bill. This red dot sight is styled after the real steel T1 micro red dot sight but with slight changes in the external design, including a canted illumination dial to reduce peripheral vision obstructions. The 20mm Picatinny mount is also integral, providing a stronger overall unit with the sacrifice that it cannot be used on T1 footprint mounts. 

The Micro Red Dot Sight PRO offers 11 brightness settings, making it ideal for both bright sunlight and gloomy CQB environments. Windage and elevation adjustment is provided by a pair of capped turrets, requiring a flathead screwdriver to apply adjustments. The set includes the sight itself and a 20mm Picatinny rail riser, meaning if you're running an M4 platform you don't need to source the riser separately so you can actually see down your sight. 

If you're looking for the cutting-edge micro red dot sight look for your primary, the Delta Armory Micro Red Dot Sight PRO with Riser is both affordable and effective!

If you're looking for accuracy improvements for your M4/AR-15 AEG, the Delta Armory TRINITY R-Hop Bucking Bundle for AEG is what you need to tighten your groupings. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes.

The inner patch of the TRINITY bucking is diamond-shaped, similar to the Maple Leaf Super bucking, intended to improve accuracy by applying backspin more consistently. The advantage of using a TRINITY set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you're looking for tighter groupings from your Airsoft AEG, the TRINITY R-HOP Bucking Bundle is the one to go for!

If you're looking for a safer alternative to LiPo batteries without compromising on trigger response or rate of fire, the 9.6V 1600mAh NiMH Crane Stock Battery from Delta Armory is a great choice. This 8-cell NiMH battery comes pre-wired with a mini-Tamiya connector and is arranged in two cell groups - commonly known as a "nunchuck" or "crane stock" configuration. This layout makes it ideal for fitting into the side compartments of crane stocks and similar designs like the Delta Armory Stock and PTS EPS Stock.

As with all NiMH batteries, it must only be charged using a suitable NiMH charger, and it should never be left unattended while charging. For added safety, we strongly recommend charging your batteries inside a Battery Safe Charging Bag. With a capacity of 1600mAh, this battery can keep most AEGs with a mini-Tamiya connector running strong for several hours of high-intensity play. However, if you're expecting to be out all day, carrying a spare is a smart way to ensure you don't miss any of the action!

If you're in search of an affordable red dot sight with the iconic open reflex look and more than its fair share of functions, the Delta Armory Multi-Reticle Open Reflex Red Dot Sight is one to watch. Constructed from aluminium with an integral 20mm Picatinny rail mount, this red dot sight is powered by a CR2032 button cell with the choice of red or green reticle illumination in 5 brightness levels.  

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the Delta Armory Multi-Reticle Open Reflex Red Dot Sight is an impressive bit of kit for an equally impressive price!

If you like the styling of real steel holographic sights, the Delta Armory Holo-551 Style Red Dot Sight is one to watch. Patterned after the real steel 551 holographic sight, the Holo-551 is the shorter alternative to the Holo-552, ideal for compact platforms with limited rail space. Boasting an integral 20mm Picatinny rail mount, red and green reticle illumination with 5 brightness levels for each colour, the Holo-551 provides the same superb utility as the Holo-552 without wasting space on your primary. 

Benefitting from a strong alloy hood protecting the delicate internals, the holographic sight design is often credited with being one of the more robust red dot designs on the market, insulating you against accidental bumps and scrapes, unlike other "open" red dot designs. If you're an aggressive, or dare we say it, clumsy skirmisher, this could save you some anguish! If you're looking for a holographic-style optic for your SMG-5, AR-9 or other compact SMG, this is the one to go for!

If you've only got pocket change but want a vertical grip, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is ideal. This ultra-affordable vertical foregrip is styled after the real steel KAC VFG, the iconic design used on US Army M4A1 rifles and G36K platforms used by German KSK. This VFG mounts to any 20mm Picatinny rail and is very easy to mount, requiring not a single tool! 

To mount the grip, unscrew the base, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place. If you're looking for a cost-effective ergonomic enhancement for your 20mm Picatinny rail-equipped platform, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is the one to go for!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

Are you having HOP-up troubles with your M4 platforms? Delta Armory has you covered! This HOP-up chamber is a replacement part and comes with all the necessary pieces for installation, including the HOP-up rubber and nub. The main chamber is made from a sturdy plastic polymer and is compatible with all M4 style AEGs which have V2 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Delta Armory HOP-up chamber is an affordable replacement for M4/AR-15 AEGs, fix up those old primaries and get them shooting again with this low-price solution.

If you've lost important parts from your mag release, this set should sort you out! The Delta Armory Magazine Release Catch for M4/AR-15 AEG is a replacement original parts set which includes the mag catch, spring and screw, though the button itself is not included. Compatibility-wise, this set is intended for Delta Amory M4/AR-15 AEG platforms but should also fit most other brands. If your mag release spring went flying or your screw got lost in the carpet, this set should get you back up and running!

If your Delta Armory AEG has run into some issues relating to its charging handle, do not fear, we have just the thing for you! The Delta Armory M4/AR15 AEG Extended Charging is constructed from alloy and features a steel spring for extra durability. This is an original replacement piece for your Delta Armory platform and features an extended handle design so you can better grip it when the time comes to adjust your Hop-Up unit.

If you need to fix up your old Airsoft AEGs with charging handle issues, you need the Delta Armory M4/AR15 AEG Extended Charging Handle, get your AEGs back in skirmishing condition, it's what they deserve.

This Delta Armory scope is a basic but effective non-illuminated scope with the highly functional "Mildot" reticle, providing index marks on both the horizontal and vertical planes of the scope's crosshair to allow on-the-fly estimations of range and windage, as well as allowing moving targets to be engaged more easily. The scope is adjustable between 3x and 9x magnification, covering the entire spectrum of usefulness for Airsoft skirmishes, and comes with two 25mm scope rings for 20mm Picatinny rails.

If you're looking for a medium-range optic with the option to zoom out and handle targets at short range, the Delta Armory 1-4X24RG LPVO Rifle Scope does exactly that. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1x up to 4x, ideal for short and medium-range engagements mounted on an assault rifle, DMR or sniper rifle. 

The 1-4X24RG offers windage and elevation adjustment via a pair of capped turrets, along with a choice of red or green reticle illumination in 5 brightness settings and a fast focus dial at the rear of the eyebell so you can get a clear view at different engagement ranges. With a dual ring mount for 20mm Picatinny rails and a CR2032 3V button cell included, this LPVO is ready to rock straight out of the box!

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

If you've misplaced parts from your dust cover, this set should cure that! The Delta Armory Steel Dust Cover for M4/AR-15 AEGs is a replacement original part set for Delta Armory M4/AR-15 platform AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the dust cover, axis pin, c-clip, and spring.

If you're looking for an easy way to carry a lot more ammo, the Delta Armory 50rnd Extended Magazine for P-Series GBB Pistols has you covered! This magazine is constructed from a heavyweight alloy with a steel feed spring and polymer feed lips. The base plate can easily be removed, making maintenance and repairs a breeze. On the rear of the magazine, we can find some markings that count up to 31, presumably a nod to real steel extended pistol magazines.

This double-stacked magazine holds a whopping 50 BBs, which can be loaded either at the top or front, using a speedloader. To fill the gas, there is a fill valve located on the bottom, recessed into the magazine. Due to the magazine being larger than a regular pistol mag, it takes longer to cool down when shooting so you'll get more shots at full power before noticing a dip.

Compatibility-wise, this magazine is designed for the Delta Armory P-series pistols but should fit most EU-style pistols, including the Tokyo Marui EU pistol, the Action Army AAP-01 and the Umarex Glock. If you're looking for extra BBs to dominate with your sidearm, the Delta Armory 50rnd Extended Green Gas Magazine for P-Series GBB Pistol is for you!

If you're searching for a sling mounting solution for your M4/AR-15 AEG, the Delta Armory CQD Sling Plate for M4/AR-15 AEG is ideal. Constructed from steel for maximum strength, this CQD-style sling plate allows you to mount a single-point sling to either side of your sliding stock M4/AR-15 AEG, ideal for left or right-handed shooters. The plate can also be paired with a front sling point if you prefer a two-point sling. Compatibility-wise, this plate should fit any Marui-spec M4/AR-15 AEG with a sliding stock but won't work with fixed stocks or PDW stocks.

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you are looking for an affordable way to add advanced functionality to your M4/AR-15 AEG, this is worth a look! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox replaces your conventional trigger assembly and offers burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

If you've lost your bolt catch, you're in luck! The Delta Armory Mock Bolt Catch for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs but may also fit certain other brands, provided they don't have a functional bolt catch and use a bolt catch style which sits in the receiver recess and isn't retained by screws or a pin. This bolt catch is constructed from alloy and is the standard milspec design.

If your mock bolt has become damaged or the paint has started to wear off, you should get a new one! The Delta Armory Metal Mock Bolt For M4/AR-15 AEG is a replacement piece constructed from steel. It will fit on most common Airsoft M4/AR-15 AEGs, allowing you to smarten up your rifle receivers with brand-new shiny parts.

Don't let your mock bolt ruin your AEG's pristine aesthetic, get the Delta Armory Metal Mock Bolt For M4/AR-15 AEG so it can be shiny and brand new again!

If your dust cover won't stay closed, this will sort it! The Delta Armory Dust Cover Lock for M4/AR-15 AEG is a replacement original parts set for Delta Armory M4/AR-15 AEGs but may also fit other AEGs with similar dust cover designs. The set includes the dust cover lock, lock cover, spring and the mounting screw.