Delta Armory Airsoft

If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!

The set includes the DA-B04, 2 extra 120rnd Mid-caps, a Tactical Vest, a pair of NUPROL Pro Mesh Goggles, a NUPROL Tactical Half Face Mask, a speed loader, Delta 0.25g BBs, a Ni-MH battery, charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

If you need BBs for a mix of CQB and outdoors, 0.25g BBs are what you need! The Delta Armory 0.25g Diamond 6mm BBs are supplied in a resealable bag of 4000 and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you need BBs for outdoor skirmishes, 0.28g BBs are what you need! The Delta Armory 0.28g Diamond 6mm BBs are supplied in a 1KG resealable bag of 3571 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're an outdoor skirmisher with a long-range-focussed setup, Delta Armory 0.32g Diamond 6mm BIO BBs are what you need to feed it! These finely polished Airsoft BBs are constructed from a biodegradable polymer and flawlessly polished for maximum accuracy and reliable feeding. 

Supplied in a resealable bag containing approximately 3120 BBs, these bio BBs have uncompromisingly tight tolerances of +/- 0.01mm with a guaranteed weight difference not exceeding 0.01g. If you need a bio BB with the perfect combination of heavy weight, affordable price and tight tolerances, Delta Armory's 0.32g Diamond 6mm BIO BBs are exactly that!

If you're looking for a speed loader with the perfect combination of capacity and portability, the Delta Armory 450rnd Speed Loader is a fine choice. Based on the original Tokyo Marui Speed Loader XL design, this loader is patterned after real steel NATO STANAG 5.56 magazines and as such, fits nicely into M4/AR-15 magazine pouches. 

This speed loader is designed primarily to load Airsoft mid-cap and low-cap magazines through its fill aperture at the top rear of the body and can be filled through the fill window on the bottom. To deploy the thumb plunger, simply pull the textured sliding button rearwards and it will pop out, ready to load. Stowing the plunger again is equally easy; simply push it down and slide the button forward to lock it in place. 

Also present on the top is a fold-out adapter for GBB pistol magazines, meaning you can load your AEG or GBB with the same loader, saving you space on your rig. An additional adapter for wider feed lips is also included, giving you plenty of options and allowing you to load almost any Airsoft gun without resorting to breaking your thumbs! If you need a speed loader to take into battle with respectable capacity and not too much bulk, the Delta Armory 450rnd Speed Loader will sort you out!

If you're seeking high-grade BBs for your DMR or accurised long range platform, Delta Armory 0.32g Diamond 6mm BBs will serve you well! These BBs are part of Delta's Diamond BB range, boasting a finely polished surface for maximum accuracy with minimal tolerances of only +/- 0.01mm dimensionally and weight variation not exceeding 0.01g between individual BBs. 

Supplied as a 1KG resealable bag, Delta's Diamond BBs are best used in upgraded platforms focussed on accuracy and have performed very well in our tests, sitting neck and neck with other top-tier BB brands. The bag contains approximately 3120 BBs made from standard polymer, if you need the biodegradable version, click here. If you want to get the best accuracy out of your upgraded AEG or GBBR, Delta Armory 0.32g Diamond 6mm BBs will give you what you need!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you're in search of the perfect mid-range scope then you are in luck! The Delta Armory 1.5-5X40BE LPVO Rifle scope w/ Flip-up lens caps is exactly what you are looking for. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1.5x up to 5x, ideal for short and medium-range engagements mounted on an assault rifle, DMR or sniper rifle. 

The 1.5-5X40BE offers windage and elevation adjustment via a pair of capped turrets, along with a choice of a red, green or blue reticle with 3 brightness settings and a fast focus dial at the rear of the eyeball so you can get a clear view at different engagement ranges. With a dual ring mount for 20mm Picatinny rails, this LPVO is ready to rock straight out of the box!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

If you're looking for accuracy improvements for your M4/AR-15 AEG, the Delta Armory TRINITY R-Hop Bucking Bundle for AEG is what you need to tighten your groupings. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes.

The inner patch of the TRINITY bucking is diamond-shaped, similar to the Maple Leaf Super bucking, intended to improve accuracy by applying backspin more consistently. The advantage of using a TRINITY set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you're looking for tighter groupings from your Airsoft AEG, the TRINITY R-HOP Bucking Bundle is the one to go for!

If you've been checking out LPVOs searching for the ideal stand-in for the KS-1 optic, the Delta Armory 1-6X24IR LPVO Rifle Scope is a great option. Measuring a mere 23.7cm approximately, this is the shortest "short dot" we have seen for this price and a fantastic affordable alternative to the currently unavailable Vortex 1-10 LPVO used on the British Army's latest service rifle, the L403A1 AIW. 

LPVOs are rapidly gaining in popularity, both in the real steel world and Airsoft, offering a does-it-all optic which is great for short-range and long-range scenarios. Whether you mount it on an assault rifle, DMR or sniper rifle, the 1-6X24IR LPVO Rifle Scope offers all the functionality you'll need along with superb eye relief for fast target acquisition and compatibility with goggles and face masks. 

Offering full adjustment for windage and elevation via locking tool-less adjustment turrets, red or green reticle illumination with 5 levels of brightness, a pre-installed dual ring mount for 20mm Picatinny rails and a generously included CR2032 battery to get your reticle glowing, the 1-6X24IR LPVO Rifle Scope is ready to tackle targets at any range and the perfect addition to any mid-range build, KS-1 or otherwise!