EU Warehouse Stock

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

A Polymer constructed Speed Draw Buckle for AR Platform Rifles (M4/M16 shape Airsoft Guns). This awesome device will sit on your Belt, and allow you to 'holster' your Rifle whilst you switch to a Sidearm/Pistol, or turn your attention to another task. The included Pin is to replace your current Rear Body Pin, and will lock into the Buckle (but allow the Gun to rotate), so that your Rifle will sit as comfortably as possible. This frees up your hands to worry about grabbing your Pistol or completing another task, improving your efficiency in the field.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

The Low Profile NVG Mounting System is a complete replacement shroud for Airsoft Helmets, which also comes with a Mount Assembly attached, ready to connect to a wide range of Night Vision Systems. It is constructed from a fairly tough Polymer, however we recommend tethering the Shroud to your Helmet. This advice is even given to users of real Mounts/NVGs, so it's just common sense when operating with an Airsoft replica.

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

Sick and tired of having to draw your radio from its pouch to adjust the volume, or kill it entirely to save your ears from the voice of an annoying teammate? The Open-Top MOLLE Radio Pouch from 8Fields Tactical allows you to securely store your radio on your rig with full access to any controls on the top, and controls on either side.

This pouch is also slightly adjustable thanks to a bungee cord running through, which can be tightened to provide more retention for a smaller radio handset, or loosened to allow for larger radios to be used. This pouch attaches to MOLLE loops and also has MOLLE loops on its front panel, allowing you to stack pouches on top of this one if needed. Your radio is held securely in the pouch using a bungee cord, which can be pulled to either side if you need to remove the radio from the pouch.

Sick and tired of having to draw your radio from its pouch to adjust the volume, or kill it entirely to save your ears from the voice of an annoying teammate? The Open-Top MOLLE Radio Pouch from 8Fields Tactical allows you to securely store your radio on your rig with full access to any controls on the top, and controls on either side.

This pouch is also slightly adjustable thanks to a bungee cord running through, which can be tightened to provide more retention for a smaller radio handset, or loosened to allow for larger radios to be used. This pouch attaches to MOLLE loops and also has MOLLE loops on its front panel, allowing you to stack pouches on top of this one if needed. Your radio is held securely in the pouch using a bungee cord, which can be pulled to either side if you need to remove the radio from the pouch.

If you need a slim stick battery for your ASG Scorpion, M4/AR-15 AEG buffer tube or top-wired AK AEG this will do the trick! The Gen's Ace 7.4v 1200mAh 25C LiPo Stick Battery measures approximately 13x1x2cm which makes it perfect for rear wired M4 platforms with the standard buffer tube battery compartment, top wired AKs which house their battery beneath the top cover and SMG-5K platforms. The battery is pre-wired to a Deans connector and the length of wire between the cell group and the connector is approximately 6cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C, making it great for almost any Airsoft AEG and a perfect fit for the ASG Scorpion EVO 3A1, though make sure you measure before ordering!

A 20L Capacity Rucksack / Backpack for Airsoft, Hiking and other Outdoor Activities, which is made from a tough and durable 1000D Polyester Material with Water Resistant properties and stiffened walls to retain its' shape. With external MOLLE Loops, Hook & Loop Panels and Compression Straps, there's not much this Backpack can't do.

This Gas Blowback Airsoft Pistol is a hybrid of the 1911 and Hi-Capa platform to create a beautiful and well-performing sidearm which looks the business and can compete with the big boys. The pistol features a unique Compensator, as well as a Custom Stippled Grip and 20mm Accessory Rail, and has a huge double stack Magazine to give you the biggest gas capacity possible.

This Gas Blowback Airsoft Pistol is a hybrid of the 1911 and Hi-Capa platform to create a beautiful and well-performing sidearm which looks the business and can compete with the big boys. The pistol features a unique Compensator, as well as a Custom Stippled Grip and 20mm Accessory Rail, and has a huge double stack Magazine to give you the biggest gas capacity possible.

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

Store up to 3 Airsoft rifle magazines at a time within the 8Fields Elastic Triple Magazine Pouch.

Elastic and secure with MOLLE attachment, it'll hold a variety of magazines and at 3 at a time you won't be going in empty any time soon.

Store up to 3 Airsoft rifle magazines at a time within the 8Fields Elastic Triple Magazine Pouch.

Elastic and secure with MOLLE attachment, it'll hold a variety of magazines and at 3 at a time you won't be going in empty any time soon.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

A replica MK-13 Flashbang Grenade, with some assembly required out of the box!

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

The Battleaxe Pistol Grip gunfighter mod.2 for M4/AR-15 AEGs has a cutting-edge grip design with a more vertical angle than other conventional grips, designed specifically for increased comfort in modern shooting stances. This grip also includes a motor baseplate constructed from polymer.

The unique and modern shape of the grip improves comfort and enhances shooting accuracy. As a result, shooters can focus on their target, minimizing hand and arm fatigue whilst taking part in extended skirmish operations. This pistol grip is perfect for those seeking the perfect balance between functionality and ease of use, it also gives your AEG a unique look.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

If you need something to support the weight of your sniper rifle or DMR setup, you can't go wrong with a Rokstad Harris Lug Rifle Bipod! This bipod is compatible with common Harris-style sling/bipod lugs found on the stocks of most sniper rifles, including most BAR-10, Well MB series and L96 rifles.

Constructed from strong alloy with a steel sling loop built-in, this bipod boasts adjustable leg length via the pair of catches on each and the bipod feet are made from rubber for great gripping qualities. It's the perfect choice for sniper rifles and DMR rifles, providing 6-position adjustable legs, rubber feet and mounting apparatus for both sling/bipod stud and 20mm Picatinny rails.

This rather large Red Dot Sight from Theta Optics offers a large sight picture for easy target acquisition, multiple choices of reticule, integrated rail mount and 3 x short 20mm RIS sections for the connection of extra accessories.

If you are fan of historical rifles, or you partake in historical re-enactment, get excited, that's an order! The Lee Enfield Rifle No.1 MK.III has just dropped in Airsoft form! The S&T S.M.L.E is authentically constructed, with a real wood stock and metal wherever there is metal on the real rifle and is indistinguishable from the real thing in all ways but one; this one fires 6mm BBs!

Spare magazines are available here.

For those of you running snipers or DMRs with larger magazines, 8Fields have got the pouch for you. Constructed from tough water-resistant 1000D Cordura, the pouch flap is secured by both Velcro and a sturdy polymer buckle.

The pouch will fit 2x SCAR-H, G3, A14 or SR25/AR10 magazines, although it will also fit a whole host of other magazines, asl well as a whole host of other tactical devices such as radios.

Attached via any MOLLE equipped surface, such as rigs and bags, you can be sure that your mags will be kept safe and sound.

The smallest Tracer Unit in the world just got better! Now brighter and more efficient than ever before, the Xcortech XT301 is back in business in its' MK2 form. Compatible with both 14mm CCW and 11mm CW Pistol Threads, the XT301 MK2 will help you to own the night.

The smallest Tracer Unit in the world just got better! Now brighter and more efficient than ever before, the Xcortech XT301 is back in business in its' MK2 form. Compatible with both 14mm CCW and 11mm CW Pistol Threads, the XT301 MK2 will help you to own the night.

If you have a magazine which leaks from the fill valve, or your mag is a bit old and the valve has taken a hammering over the years, a replacement valve is the way to go. This Specna Arms valve replaces the fill valve in your magazine with a nice fresh one, complete with an O-ring to ensure there are no leaks! This valve will require a valve key to install.

If you need to carry some extra mags into battle you need this! The FMA Kydex Double Holster for Pistol Magazines fits the most common 9mm and other small magazines. This includes magazines for pistols such as EU/GLOCK, CZ P-09, B9 and F226.

Slide your magazines in the holsters and the polymer retention system will keep them secure. If you're struggling to insert or remove magazines, there is a Phillips head screw in the centre of the holster that can be adjusted to tighten or loosen the magazine insert area.

The holster attaches to belts using the paddle back, it fits on belts with a 2" width or less, meaning it should fit on most common tactical belts. With the FMA Kydex Double Holster for Pistol Magazines you can carry your pistol magazines easily and with style, just make sure to bring enough for the battlefield!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!