EU Warehouse Stock

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

A 1000D Polyester constructed Holster for MOLLE compatible systems, which mounts Horizontally rather than Vertical, allowing you to more comfortably mount it on a Chest Rig or other MOLLE Panel without obstructing your Pouches. It also results in a slicker draw for those who prefer this mounting style. A buckle-secured Thumb Strap wraps around your Pistol Grip to hold the contents of the Holster securely. This Holster will accept Small to Medium sized Pistols.

A 1000D Polyester constructed Holster for MOLLE compatible systems, which mounts Horizontally rather than Vertical, allowing you to more comfortably mount it on a Chest Rig or other MOLLE Panel without obstructing your Pouches. It also results in a slicker draw for those who prefer this mounting style. A buckle-secured Thumb Strap wraps around your Pistol Grip to hold the contents of the Holster securely. This Holster will accept Small to Medium sized Pistols.

If you have a pile of leaky mags, now is the time to fix them up! The WADSN Gas Magazine O-ring Repair Set includes 10 O-rings of 7 different sizes, designed to replace the O-rings of the knocker valve and fill valve in most Airsoft gas magazines. The set is supplied in a clear polymer organiser case to keep everything neat and includes a set of polymer installation tweezers to make installation without damaging the O-rings considerably easier. If you have a lot of leaky mags gathering dust, this set is the key to giving them a new lease of life!

A simple Rifle Bag designed to carry a single Carbine Length Rifle with a length of up to 120cm / 1m, or up to 140cm with the internal Sleeve and an additional Small Rifle or Submachine Gun in the front Pocket up to 70cm in Length.

A lightweight Airsoft replica helmet constructed from Polymer, designed to replicate the US Army's MICH 2000 helmet. 

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

A spare or replacement NiMH Battery for Airsoft Electric Pistols, such as the CYMA CM and Tokyo Marui series, perfect for staying in the fight for longer. If you want to play for longer during an Airsoft Game without having to return to the safe zone, then stock up on spare batteries today.

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

Whether you like a pistol to look discrete and professional or you prefer something loud, proud and unashamed, you will appreciate the Golden Eagle 1911! This gas blowback pistol boasts full metal construction, a pre-installed 6.02mm tightbore inner barrel and an 11mm CW female threaded outer barrel, not to mention the finish.

Addressing the elephant in the room, the GE 1911 is available in standard black to keep the reenactors happy and mirror-polished chrome silver or gloss gold for those of us with style! The finish on this pistol series is remarkably good, especially when you consider the price point. If you want to telegraph your wealth in game and distract the enemy team with shiny things, this is the pistol to use!

This is a Magazine Adapter for Airsoft Shotguns, allowing you to use any M4/M16/STANAG Magazine and maximise the effectiveness of your replica. Yeah, your Shotgun is pretty cool.... But wouldn't it be even better with a Drum Magazine sat underneath?

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market.

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A lightweight and breathable Airsoft half face mask which has fabric sides, allowing you to aim down your sights much easier than with conventional lower face protection.

A durable and strong Dump Pouch designed to attach to MOLLE or Belt Systems, which is collapsible to be easy to store or have on your kit whilst not in use.

Fed up of turning around during the heat of a firefight to hand your friend a chocolate bar? The Assault Back Panel Mod.2 may help facilitate the smooth distribution of mid-battle calories to keep your team fuelled up! The Assault Back Panel can be attached to the MOLLE loops on the rear of a chest rig or plate carrier and allow your teammates to borrow speed loaders, magazines and other equipment whilst you rightly face the enemy and open fire! This pouch includes dual utility pouches and an internal hydration pouch, suitable for a small hydration bladder (available separately).

Need somewhere to stash your tools, sweeties, maps or other accessories? A utility pouch is designed with just that in mind! The General Purpose MOLLE utility pouch by 8Fields Tactical sports dual zip closure to prevent dirt and debris from getting in, two inner pockets to keep your kit organised, and MOLLE loops on the front, allowing more pouches to be stacked on top. This pouch is constructed from 1000D polyester, providing a high stitch density to add water resistance and make this pouch robust enough to handle the rigours of an intense skirmish!

This gas-powered Airsoft Shotgun is a sight to behold, with Real Wood furniture and Full Metal construction, aside from a Rubber Butt Pad. Just like the TM870 series (to which these are compatible) it takes standard Airsoft Shotgun Shells and fires either a 3rnd or 6rnd burst at your selection. If you're looking for a realistic Gas Shotgun for taking names outdoor and CQB, then the M8870 Real Wool is a game changer.

If you love to be at the cutting edge of Airsoft technology, the GATE TITAN™ II Bluetooth® MOSFET V2; Expert Firmware [AEG Rear Wired] belongs in your next build! This is the next generation of the superb GATE TITAN™, boasting innumerable improvements over the original, the most notable of which is its direct Bluetooth 5.2 compatibility. This means you no longer need the Gate Bluelink or USB link to customise your settings; simply download the Gate Control Station app and you can access the TITAN™ II's most advanced settings via the included Expert Firmware!

Like the original TITAN™, the TITAN™ II allows you to set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay.

The TITAN™ II also adds more trigger sensitivity options than the previous version, reduced power draw, several new and improved sensors and the ability to adjust pre-cocking by percentage increments, meaning more options than ever before. If you want your primary to be at the very peak of Airsoft technology, the TITAN ™ II Bluetooth® MOSFET V2; Expert Firmware [AEG Rear Wired] belongs inside!

A Double Magazine Pouch for Airsoft Replica Pistol Magazines, happily holding two Single or Double Stack Mags. Compatible with MOLLE, this Pouch will easily install to any MOLLE Chest Rig, Plate Carrier or Drop Leg Platform, and is the perfect way to carry enough Magazines on you to have a good run with your Pistol when you need it! Carry more Magazines and play for longer without having to crawl back to the Safe Zone for a reload.

For those of you who prefer the old ways, this iconic beast of a revolver features a fully revolving revolving drum holding six shells. With a  4 inch barrel it is compact but still with a sturdy feel thanks to it's full metal alloy construction and is powered by green gas.

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance.