EU Warehouse Stock

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

For those of you running a loadout with a serious amount of mags, the 8Fields Large GP MAG Pouch is attached via MOLLE and secured by not only zip, but also with a waterproof flap with clip buckle and Velcro strips to ensure there's no way you're mags are escaping.

The pouch comes including with an insert, attached to the interior of the pouch with Velcro. 

The insert features 6x elasticated retention loops, to keep your STANAG mags secured vertically, reducing the size of the pouch relative to how many mags you can carry. The pouch also has the capacity to store box magazines for those of you that run LMGs.

The rear of the pouch features 3 MOLLE strips for additional attachment methods.

If you have a nice optic you want to keep safe but you also want to use it to great effect in skirmishes you can do so with confidence with this Vector Optics lens protector installed! The Lens Protector Cap For Red Dot Sight is designed to fit red dot sights or scopes with an objective lens diameter of between 29 and 29.3mm and is comprised of 3 parts; the aluminium housing, the polycarbonate protective lens and rubber O-rings to ensure a tight fit.

Avoid that heart-stopping moment you hear glass smashing mid-game for a far smaller financial sacrifice than buying a whole new optic!

This is the panel for those of you who run a Buckle Up rig as part of their loadout. With 2 x buckles to secure the pouches as well as the panel being Velcro backed you can be sure your mags will be kept safe and easily accessible in the heat of battle.

Designed mostly for 7.62/.308 (SR25/AR-10/HK417/M14/G3/FAL/SCAR-H/SSR) magazines, but can potentially be used for other mag types and tactical accessories, all secured in place with elastic retention loops. The open design provides fast reload and a additional rubber cord with a comfortable grip, which protects magazine from falling. To top it off the front pouches feature MOLLE loops for additional options.

Compatible with all Buckle Up platforms. This system allows you to be ready at a moments notice with the equipment you need close at hand.

This is the panel for those of you who run a Buckle Up rig as part of their loadout. With 2 x buckles to secure the pouches as well as the panel being Velcro backed you can be sure your mags will be kept safe and easily accessible in the heat of battle.

Designed mostly for 7.62/.308 (SR25/AR-10/HK417/M14/G3/FAL/SCAR-H/SSR) magazines, but can potentially be used for other mag types and tactical accessories, all secured in place with elastic retention loops. The open design provides fast reload and a additional rubber cord with a comfortable grip, which protects magazine from falling. To top it off the front pouches feature MOLLE loops for additional options.

Compatible with all Buckle Up platforms. This system allows you to be ready at a moments notice with the equipment you need close at hand.

This is the panel for those of you who run a Buckle Up rig as part of their loadout. With 2 x buckles to secure the pouches as well as the panel being Velcro backed you can be sure your mags will be kept safe and easily accessible in the heat of battle.

Designed mostly for 7.62/.308 (SR25/AR-10/HK417/M14/G3/FAL/SCAR-H/SSR) magazines, but can potentially be used for other mag types and tactical accessories, all secured in place with elastic retention loops. The open design provides fast reload and a additional rubber cord with a comfortable grip, which protects magazine from falling. To top it off the front pouches feature MOLLE loops for additional options.

Compatible with all Buckle Up platforms. This system allows you to be ready at a moments notice with the equipment you need close at hand.

This is the panel for those of you who run a Buckle Up rig as part of their loadout. With 2 x buckles to secure the pouches as well as the panel being Velcro backed you can be sure your mags will be kept safe and easily accessible in the heat of battle.

Designed mostly for 7.62/.308 (SR25/AR-10/HK417/M14/G3/FAL/SCAR-H/SSR) magazines, but can potentially be used for other mag types and tactical accessories, all secured in place with elastic retention loops. The open design provides fast reload and a additional rubber cord with a comfortable grip, which protects magazine from falling. To top it off the front pouches feature MOLLE loops for additional options.

Compatible with all Buckle Up platforms. This system allows you to be ready at a moments notice with the equipment you need close at hand.

If you are after the latest and greatest bump helmet available, you have found it! Complete with the latest variant of the ARC helmet accessory rails and an alloy insert in the pre-installed NVG/ action camera mount, the Next-generation Spec-Ops bump helmet is ready to be tarted up to suit your loadout!

A set of two mock ballistic plates for assault vests / plate carriers, which are made from a lightweight injection moulded plastic.

This Airsoft Shotgun is powered by an Internal Gas Tank stored in the Buffer Tube, meaning it can be topped up at any time, and fires either groups of three or six BBs at once depending on what you set. It comes packaged with loads of tactical furniture to keep you at the top of your game, such as Shell Holder, QD Sling Loops and a Full-Length Top Rail with Flip-Up Ironsights.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

If you run a G3 platform AEG and you need mags with no rattle and decent capacity, Fuxing has you covered! This magazine is constructed with a steel shell and polymer internals and is a copy of the most common G3 magazine style seen in the real steel world. The externals include an over-insertion stop on each side and reinforcing ribs giving it a realistic look, and on the inside this is a spring-loaded mid-cap mag, meaning no battle rattle as you move!

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speedloader or loading tool and holds a very respectable 150 BBs; more than enough to keep pace with the M4 and AK users. These mags should fit any Tokyo Marui clone G3 AEG platform, including the G3A3, G3A4, G3 SAS, MC51 and PSG1. Compatibility with the LCT G3 series is yet to be confirmed.

If you are looking for a way to carry your 7.62 styled mags look no further! The Sniper Rifle/7.62 Mag pouch from 8Fields Tactical provides an ideal pouch for G3, SR25, M14 and SVD magazines, as well as being able to hold large sniper rifle magazines or multiple small sniper rifle mags.

If you are looking for a way to carry your 7.62 styled mags look no further! The Sniper Rifle/7.62 Mag pouch from 8Fields Tactical provides an ideal pouch for G3, SR25, M14 and SVD magazines, as well as being able to hold large sniper rifle magazines or multiple small sniper rifle mags.

If you are looking for a way to carry your 7.62 styled mags look no further! The Sniper Rifle/7.62 Mag pouch from 8Fields Tactical provides an ideal pouch for G3, SR25, M14 and SVD magazines, as well as being able to hold large sniper rifle magazines or multiple small sniper rifle mags.

If you plan to upgrade your M4/AR-15, SMG-5 or G3 AEG with a high-end MOSFET filled to the brim with programmable features, the Perun MOSFET V2 Hybrid, Rear Wired is what you want! This optical MOSFET/ETU system replaces your conventional trigger contacts with optical sensors, improving trigger response and reliability while adding an absolute litany of programmable fire mode and MOSFET functions. 

Fire mode options include burst modes of varying duration, reconfigurable fire selector positions, semi-automatic only, DMR/sniper delay, binary trigger and two-stage trigger. The V2 Hybrid also offers adjustable trigger sensitivity, adjustable active braking, pre-cocking with spring release and DSG mode, a specific mode for Dual Sector Gear setups. Make no mistake, the V2 Hybrid is every bit as advanced as its rivals with the added benefit that all of the programming can be carried out using the fire controls of your AEG, with no need for PC or app connectivity!

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

Maybe you aren't a fan of the ever-increasing pile of fancy slide cut shiny hi-capas? For the discerning gentleman who likes his sidearm to be a sidearm, this Army 1911 is the one. Featuring a full metal frame, slide, and outer barrel, the noise this thing makes when fired is very satisfying! The classic 1911 design aesthetic coupled with more modern MEU style sights and a wrap-around ergonomic grip means the R27 provides all the necessary enhancements but without any unnecessary additions ruining the pistol's simplicity, for which it is famous.

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

The Low Profile NVG Mounting System is a complete replacement shroud for Airsoft Helmets, which also comes with a Mount Assembly attached, ready to connect to a wide range of Night Vision Systems. It is constructed from a fairly tough Polymer, however we recommend tethering the Shroud to your Helmet. This advice is even given to users of real Mounts/NVGs, so it's just common sense when operating with an Airsoft replica.

A spring powered pump action 6mm BB Airsoft shotgun, designed to function like a real shotgun for use in Airsoft skirmishes and events.

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!