EU Warehouse Stock

A mock Airsoft knife for players to use as part of their rig to look extra menacing, complete the look, or to use as a prop knife for those ever embarrassing knife kills.

Introducing the Heavy Duty 1-Point Sling from 8 Fields Tactical, a reinforced sling for heavy full metal AEGs and GBBRs. The sling attaches via an HK-style hook which is concealed beneath elastic to prevent it rattling and drawing attention as you sneak around. The sling also features two buckles, one between the sling and the rifle, and one on the sling itself, allowing you to quickly disconnect your rifle if necessary, or remove the entire sling without pulling it over your head, instead just snapping open the buckle. This sling also features bungee retention, giving you a bit of flexibility when running your rifle slung and allowing you to take unconventional positions with no trouble. This is perfect for use with the rear sling plate on an M4/AR15.

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.

If you've got a lot of mags and need to keep them secure and to hand at all times, this Triple Open Top 7.62 Magazine Pouch is for you! Constructed from 1000D polyester, this mag pouch holds 3 x 7.62x51 style magazines, including SCAR-H, G3, AR-10/SR25, and can also take AR36 and AK-74/74 mags. This pouch will not fit 417-style magazines.

Each magazine is retained with elasticated loops and can be mounted wherever you have MOLLE webbing, including your rig, belt and backpack. On the front of the pouch, we have additional MOLLE loops so you can stack more MOLLE pouches on the front for heavier loadouts. 

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

A 7.4v LiPo Battery for Airsoft Electric Guns, specifically the Specna Arms PDW range and other replicas with a tight/compact Battery Compartment. The Battery has a capacity of 600mAh, and a discharge rate of 20/40C. The compact size of the Battery makes it ideal for PDW Stocks, Pistol Grips, PEQ Boxes and other tight battery spaces.

A large Rifle Bag designed to carry up to two Rifles, with one Short, and one Long pocket, and an array of others allowing you to carry everything you need for a day's Skirmish. 

Looking for AK74 magazines for a Soviet-era loadout? The 150rnd Mid-cap in Bakelite Orange from CYMA is constructed from polymer which is dyed to match the Bakelite magazines issued with the earliest variants of the AK74 rifle to the Soviet Army. This magazine is a spring loaded mid-cap and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74 or AKS74U AEG but will fit and feed in most AK platform AEGs.

A fully loaded lightweight rig, allowing the user to carry gear and organise pouches, without the heavy weight of a plate carrier, allowing faster movement. The rig is manufactured using heavy duty 600D Nylon, meaning it will take lots of punishment.

A fully loaded lightweight rig, allowing the user to carry gear and organise pouches, without the heavy weight of a plate carrier, allowing faster movement. The rig is manufactured using heavy duty 600D Nylon, meaning it will take lots of punishment.

A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.

A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.

A MOLLE compatible Admin/Utility Pouch for Chest Rigs and Tactical Vests that have available MOLLE loops. It is secured by a Dual Glove-Friendly Zips and features an Internal Organiser, as well as Front Velcro ID Panel and 2 x Rear M4 Magazine Pouches.

If you like to shoot a lot you will need a big bag of BBs to stay supplied! The PJ PROSLICK 0.25g BBs are provided in a 1KG bulk bag which holds approximately 4000BBs, complete with a resealable easy pour opening to minimise spillages. With tight tolerances of +/- 0.01mm and a polished surface for smooth feeding, these BBs are a great value alternative with no compromises when it comes to in game performance!

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs!

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs!

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

If you are fed up with thorns, BBs and other debris hindering your crawling advances, a set of knee and elbow pads should sort that out! The PJ Knee and Elbow Pad Set is an affordable replica of a popular real steel tactical pad set constructed from water-resistant Oxford fabric with foam padding inside and a flexible polymer shell on the front. 

The set includes a pair of knee pads and a pair of elbow pads, both of which are fully adjustable via a combination of elastic and velcro. These pads even have quick-release hooks on each strap, meaning you don't have to readjust the pads to the perfect tightness each time you put them on!

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

A 7.4v rated LiPo Battery for Airsoft Electric Guns, specifically ones that need a compact battery for a small space, such as PDW Stocks and Pistol Grips. The Battery has a 600mAh Capacity and a 20/40C Discharge Rate, as well as having a Mini Tamiya Connector to make it compatible with a huge range of Airsoft Guns. If you need a compact 7.4v LiPo for a Specna Arms PDW or other Airsoft Gun with a tight battery space, then this is the ideal choice.

A non-blowback and gas-powered pistol which you would be forgiven for thinking is of another brand. It is built to a really impressive quality with high-density Polymers that feel great in the hand, with the exact same mind-blowing performance as the original design.

If you're after spare AEP magazines you are in luck! The CYMA 30rnd Magazine is compatible with the CM.030, CM.122, CM.123, CM.126, CM.127 and CM.132 AEP, and should also fit the ASG XP17 Challenger AEP. This magazine is constructed with an alloy shell, polymer follower and steel feed spring, and can be loaded using an Airsoft speed loader through the feed lips at the top of the magazine body. This magazine holds 30 BBs and is a very compact design so it is easy to carry loads!