EU Warehouse Stock

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

Built by Theta Optics this Airsoft sight is designed to be used in conjunction with a holographic or red dot sight to magnify the picture and dot, and then be flipped to the side when not required. The sight is fully adjustable, with fine tuning adjustments for windage and elevation, as well as focus to get the clearest picture possible. The sight is designed to be fit to 20mm RIS / RAS rails, giving it great compatibility with a wide range of aftermarket holographic and red-dot sights.

This sight is perfect for those who are looking to get the perfect sight setup for both CQB and Outdoors games. For CQB flip the sight to the side, and for those longer range outdoor shots use the magnifier.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

An Airsoft Dot Sight created by THETA OPTICS, designed to be fit onto 20mm RIS / RAS Rails, and allows the user to acquire their targets quicker and more easily over traditional ironsights. This sight has the added boon of being raised, meaning that the sight is easier to use for Airsoft players who wear full face protection or lower mesh face masks, lifting the sight high enough to allow you to cheek weld even when wearing a mask.

The sight is fully adjustable, allowing windage and elevation to be set, as well as brightness and dot colour, with up to 5 brightness settings for both green and red dot modes.

This sight is perfect for any Airsoft skirmisher who is looking for a great quality red dot for their Airsoft replica without breaking the bank. The sight is great for outdoors thanks to its high brightness settings, and can be used in CQB easily by simply dropping the brightness levels to 1-2.

A compact and tactical scope for 20mm Rails, that offers a fixed 4x magnification as well as the option of a backup red dot sight for closer range engagements, and an illuminated reticule.

A simple Rifle Bag designed to carry a single Rifle with a length of up to 100cm / 1m, and an additional Small Rifle or Submachine Gun in the front 70cm Pocket. 

With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.

With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

If you've got a lot of mags and need to keep them secure and to hand at all times, this Triple Open Top 7.62 Magazine Pouch is for you! Constructed from 1000D polyester, this mag pouch holds 3 x 7.62x51 style magazines, including SCAR-H, G3, AR-10/SR25, and can also take AR36 and AK-74/74 mags. This pouch will not fit 417-style magazines.

Each magazine is retained with elasticated loops and can be mounted wherever you have MOLLE webbing, including your rig, belt and backpack. On the front of the pouch, we have additional MOLLE loops so you can stack more MOLLE pouches on the front for heavier loadouts. 

A belt-mountable drop leg pouch for SMGs which features a large adjustable holster and 2 x long magazine pouches.

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.

A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.

A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.

A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.

A large Rifle Bag designed to carry up to two Rifles, with one Short, and one Long pocket, and an array of others allowing you to carry everything you need for a day's Skirmish. 

This Magazine is designed for Airsoft M4/AR Platform Electric Guns, and features a gorgeous, modern design with Mock Bullet Window and Thick Rubber Baseplate. It holds a total of 150rnds and is filled from the top using a Speedloader. If you need an ultra modern Magazine to finish off your Custom M4 build, then the Battleaxe 150rnd Mid-Cap Polymer Magazine for AR-15/M4 is the ideal choice.

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

Please note this new variant no longer has a threaded barrel

Known in full as the Jag Precision x  Taran Tactical JW3 Combat Master Gas Blowback Pistol, this Airsoft pistol is a replica of a pistol made famous by a man in a film who took revenge for his cute doggo. Created by Army Armament this is a custom built pistol based on the Hi-capa variant of the 1911.

An Airsoft Red dot sight created by THETA OPTICS which is designed to be quickly and easily fit onto 20mm RIS / RAS Rails to make aiming your rifle or pistol easier and quicker. The sight projects a sight picture / reticule on to the front glass lens which once zeroed will be where the weapon will shoot no matter the angle at which you can see the picture, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game. 

The sight picture can be adjusted to one of four types, including a dot, circle, and two cross types, and can be adjusted to show in either red or green.

This sight is perfect for any Airsoft Skirmisher who is looking to improve their CQB game-play by allowing them to acquire targets faster and easier than their opponents on iron sights.

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

A Mid-Capacity Magazine for AR Platform Rifles (such as AR-15, SCAR, TAVOR, ARX100), that is filled using a Speedloader to fill BBs through the top of the Mag. It will then quietly and effectively feed BBs into your Gun until empty, with no rattle unlike High-Cap Magazines. With an attractive hex pattern, this is an eye-catching Magazine that looks great in any AR Platform Airsoft Gun. Not only this, but it is compatible with Tokyo Marui (TM) Replicas too.

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs!

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A lightweight 'brain-bucket' made using tough Polymers, which is a beautiful hybrid between the MICH helmet we all know and love and the useful rail space of the FAST helmets.