- CNC Aluminium & POM construction
- Various O-rings included
- Rotary style adjuster - M4/AR15 AEG & HPA compatible
If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.
This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Gate EON HOP-up unit follows the EON gearbox as part of Gates CNC internal parts range. The unit itself and the rotary adjuster are constructed from CNC machined aluminium and the HOP-up arm, redesigned C-clip, barrel spacer and HPA nozzle sleeve are made from CNC machined POM polymer to provide the precise tolerances necessary for optimal air seal and consistency down range.
Gate has redesigned the C-clip which centres the barrel and it is now made from CNC machined POM polymer to eliminate potential rotation, as is the HOP-up arm. The new C-clip has a protrusion in the bottom which interfaces with the indexing groove on AEG inner barrels, locking the barrel into a centred position and preventing rotation from occurring over time which will compromise accuracy and HOP-up effectiveness.
Included with the unit are plenty of spare O-rings which can also be installed over your inner barrel to seal any potential gap between the barrel spacer and the barrel itself. The unit itself has a pair of O-rings at the nozzle end and one on the feed chute to prevent BBs from falling out when you remove the magazine. Also included in the set is a nozzle sleeve to stabilise the nozzle when used with HPA engines. We all love the legendary Pro-win CNC HOP-up unit but has it now met its match?
Features
- CNC machined for ultra tight tolerances
- Aluminium HOP-up unit & rotary adjuster
- POM polymer barrel spacer, nozzle sleeve & HOP-up arm
- Multiple O-rings included in the set - Install over the inner barrel to improve air seal
- O-rings pre-installed at the nozzle end - Minimises air leaks
- O-ring on the feed chute - no more BBs falling when you remove the magazine
- Compatible with M4/AR15 AEG & AEG based HPA M4/AR15
- Compatible with AEG inner barrels, HOP-up rubbers and nubs
Package Includes
- Gate EON CNC Hop-Up Chamber for M4/AR15 AEG
Specification
General
|
Internal Part Type
|
Hop-Up Unit, Hop-Up & Parts,
|
|---|---|
 |
 |
Weight and Dimension
 |
Approx. 0.046kg
|
|---|
Construction
 |
Red,
Cyan,
Titanium,
|
|---|---|
|
Item secondary Colour
|
Violet,
Red,
Orange,
Cyan,
|
 |
CNC Machined aluminium HOP-up unit & Adjuster. CNC POM C-Clip & HOP-up arm/tensioner. Rubber O-rings
|
|
Internal Part Construction
|
Polymer, Aluminium, Rubber,
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
 |
|
|
Package Includes
|
|
Electric Part Specific
 |
V2 Gearbox
|
|---|---|
|
Gearbox Version Compatibility Variant
|
Version 2
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.