Laylax

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

This is for you techies looking to get the maximum performance from your VSR or gas blowback Airsoft rifle. This Prometheus inner barrel is 370mm in length and 6.00mm in diameter, that's right - 6.00mm! Truly the tightest of bores!

Prometheus is a well known brand that has been in the Airsoft game for a long time and the quality has always stood at a consistently high level.

Constructed from stainless steel and, the small diameter reduces as much possible air loss and allows for maximum performance and a higher FPS to be reached, although check with your site's FPS limit before bringing your newly upgraded Airsoft rifle to skirmish. Due to the minimal diameter of this barrel, make sure to use high-quality BBs such as the G&G BB range, to avoid potential jamming of BBs.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

If you are building a custom Hi-capa, the Laylax NINEBALL Custom Magazine Catch would be perfect to add a hint of style and some useful functionality at the same time. This magazine catch is an extended catch which places the button closer to the thumb, making for faster reloads and easier use for those with smaller hands. The catch is constructed from aluminium and has a textured surface to promote positive grip and control in all weather conditions. If your aim is to build the ultimate Hi-capa this would be perfect!

If you are building a custom Hi-capa, the Laylax NINEBALL Custom Magazine Catch would be perfect to add a hint of style and some useful functionality at the same time. This magazine catch is an extended catch which places the button closer to the thumb, making for faster reloads and easier use for those with smaller hands. The catch is constructed from aluminium and has a textured surface to promote positive grip and control in all weather conditions. If your aim is to build the ultimate Hi-capa this would be perfect!

Lefties rejoice! Now you can customise your Hi-CAPA with a sweet aluminium safety lever, that is specially designed for left handed folk. The length and thickness of the lever is that of a low-profile design with few protruding parts from the main body.

The safety lever is lightweight featuring a sleek custom design with minimal configuration that doesn't get in the way when operating the magazine catch or his slide stop.

Lefties rejoice! Now you can customise your Hi-CAPA with a sweet aluminium safety lever, that is specially designed for left handed folk. The length and thickness of the lever is that of a low-profile design with few protruding parts from the main body.

The safety lever is lightweight featuring a sleek custom design with minimal configuration that doesn't get in the way when operating the magazine catch or his slide stop.

If you are upgrading your VSR platform sniper rifle to the max an enlarged bolt handle can help when it comes to pulling back a mighty upgraded spring! With this in mind, Laylax conceived the PSS NEO Bolt Handle, designed for use with the Tokyo Marui VSR-10. This bolt handle should also fit VSR-10 clone sniper rifles but as with any upgrade parts, modification may be necessary.

The bolt handle and base are constructed from aluminium and the bolt handle has machined grooves to make it easier to grip in wet weather. The bolt handle is also at a turned-down angle to ensure it clears your scope, no matter how big it is. Marked on the handle and base are helpful instructions on how to use your rifle, in case you hadn't already figured that out! The laser engravings read "1 LIFT THE BOLT HANDLE" "2 PULL >>>>>>" and "3 FIRE". Thanks for the help, Laylax!

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your AEG running for longer at high speed thanks to its reinforced polymer construction. 

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

For those of you looking to customise your VSR, this should be on your list. Laylax bring us a new addition in their 'Precision Sniper System' range. Featuring machined steel construction this reliable trigger benefits from a low profile as a sniper you are likely tend to crawl and stay in the prone position with your cheek to the rifle for extended periods and a reduced safety profile is less likely to get caught accidentally.

With a sleek black design to complement your VSR or G-Spec, it also features a ridged texture on the catch for an increase of grip.

Here we have a stronger, or even replacement lock hook for the KRISS Vector's folding stock. if you want to get ahead of any potential stock lock failure in the future or you're simply the type of rough and ready player that plays hard with your RIF, this would be a worthwhile upgrade for you.

Constructed from duralumin, a strong, lightweight aluminium alloy, which can endure even the most rigorous shooting and movement for performance and peace of mind.

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

If you are upgrading your MPX AEG, a ball bearing spring guide is a great way to reduce stress on the gearbox and spring, and prolong the life of your internals when operating in high-strain setups. The Laylax Ball Bearing Spring Guide is designed for the MPX and is a quick and easy replacement thanks to its quick change functionality.

The spring guide is constructed from steel, which alone will prolong its life considerably, but the ball bearings in its base allow the guide to spin freely and redirect any stress on the gearbox shell, and the spring itself.

If you need something to dangle your P90 from while you do more important work, this sling point will do it! The Laylax Sling Mount w/QD Socket for P90 AEG is compatible with the Tokyo Marui P90 and clones of the TM design, allowing you to use either a QD sling swivel or a conventional hook sling to carry your pride and joy.

The QD sling mount is constructed from aluminium and the D-ring is high density polymer, with the complete system mounting with a robust rubberised fabric strap. This setup is a major advancement over older P90 sling mounting apparatus, and if you like your lil spacegun at the cutting edge, this is essential!

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick.