Novritsch Accessories

If you're rocking the remarkable Novritsch SSE18 AEP and want to stretch its legs, the SSE18 Minimalist Carbine Kit is a great way to do it. Constructed with a CNC aluminium chassis and a high-density polymer stock, this carbine kit transforms the SSE18 into a nifty little SMG and allows you to take full advantage of its impressive range. 

Like the Minimalist Carbine Kit for SSP18 GBB, this carbine kit is equipped with a 20mm Picatinny rail up top, ready for a red dot sight or scope, and a magnetic locking folding stock at the rear. Also present is a lug for the Novritsch Univeral Holster system machined into the left side. Given the low weight of the completed setup, we think the SSE18 in the Minimalist Carbine kit is a superb sidearm for a sniper; small enough that it won't slow you down if carried on a belt with full auto on tap to keep the enemy at pay if you get spotted!

If you love your SSX23 and would hate to see it out of action, grab the Novritsch Nozzle Assembly Set for SSX23 NBB and keep it in the parts stash just in case! This nozzle assembly is a replacement original part designed for the SSX23 N-BB pistol from Novritsch and is constructed from a high-density polymer. Nozzles are a known failure point for pistols and as reliable as the SSX23 is, it's always wise to have spare parts so you can keep your beast of a pistol up and running!

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as the Novritsch SSG10 Weight Adjustable Piston. 

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities. 

If you're running the Novritsch Red Dot Sight V2 but want to see further, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount is what you need! This flip-to-side magnifier offers 3x magnification, making distant targets easy to spot and allowing you to turn your RDS into a long-range optic and flip back to close range instantly via the flip-to-side mount. 

The mount is ready to rock on any 20mm Picatinny rail and offers standard M4/AR-15 height over bore, matching the optical centreline of most red dot sights but ideally used with the Novritsch Red Dot Sight V2. Windage and elevation adjustment dials are present on the left side and top respectively. At the rear, we have a focus adjustment dial so you can adjust to get the clearest image of your target and reticle. If you operate in a mixed environment and often need to handle both close and long-range threats, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount belongs on your primary!

This is a set of spare O-rings for Novritsch SP1, SSP2 & SSP5 V2 magazines. They are the perfect replacement parts for magazines that are leaking gas. Become a maintenance master and fix your leaky mags, rather than spending extra on new ones. Should your magazine spring a leak, a spare set of O-Rings is always handy. 

Fix your Novritsch magazines so they're skirmish-ready, or have some spare parts should the worst scenario occur. The Novritsch SSP2 O-Ring Set gives your magazines a second chance at fighting!

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours.

The Novritsch SSG10 Full Top Rail Gen.2 allows you to extend your top rail so you can mount any optic you desire atop your Novritsch SSG10. It is a 20mm Picatinny rail so will comfortably harbour most of the common scopes and sights found on the market. The rail screws into the top of your SSG10 receiver with the 4 screws provided, this keeps it securely attached to your sniper rifle, even with the chunkiest of scopes attached!

Make your SSG10 uniquely yours with the Novritsch SSG10 Full Top Rail Gen.2 and mount the perfect scope onto this rail to accommodate your sniping needs.

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

The Novritsch Hi-Capa thread adapter is exactly what you need for mounting barrel attachments to your trusty Hi-Capa Airsoft pistols. The adapter features 12mm CCW threading on one side and 14mm CCW on the other. The 12mm threading screws into your Hi-Capas outer barrel and the 14mm threading is then ready for most common muzzle devices, suppressors or tracer units.

Customise your Hi-Capas look or improve its performance in-game using the Novritsch Hi-Capa Thread Adapter to mount your preferred muzzle device.

If you love your SSP2 and would hate to see it out of action, grab the Novritsch Nozzle Set for SSP2 GBB and keep it in the parts stash just in case! This nozzle is a replacement original part designed for the SSP2 Hi-Capa GBB pistol from Novritsch and is constructed from high density polymer. Nozzles are a known failure point for GBB pistols and as reliable as the SSP2 is, it's always wise to have spare parts so you can keep your beast of a 'Capa up and running!

If you love your SSP18 and want to keep it shooting in the long term, having a Novritsch SSP18 Complete Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP18 GBB pistols and is a fantastic part to have lying around to pre-empt potential disaster, especially if you use full auto a lot. If you're very attached to your SSP18 and don't ever want it to sit around awaiting spare parts, grab this to put your mind at ease!

The Novritsch 28rnd Full Thrust Magazine for SSG10 Sniper Rifles is designed to hold exclusively 6.44mm BBs. It does not hold regular 6mm BBs. It is constructed from a translucent polymer which is perfect for quickly checking how much ammo you have remaining before a reload is due. This magazine can only be filled with a Novritsch Full Thrust BB Magazine Speed Loader as no other speed loader can hold 6.44mm BBs.

The magazine is single-stacked and holds 28 Full Thrust BBs. This may seem like a small amount, but for a talented marksman, this is more than enough to dominate the skirmish field. 

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

If you have a Novritsch Full Thrust system, you'll need one of these! The Novritsch Full Thrust BB Magazine Speed Loader is a thumb plunger-type speed loader constructed from translucent polymer and holds approximately 100 BBs. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your magazine is now filled.

If you've misplaced a screw from your SSG10 A3, the Novritsch SSG10 A3 Stock Screw Set is what you need! This set includes all of the stock screws for the SSG10 A3, constructed from steel and finished in black, just like the original screws. This screw set is only for the SSG10 A3 but may also be useful for those running the Maple Leaf MLC-S2 chassis on a VSR10 platform. 

If you want to set your SSP5 up for competition shooting or speed up its handling in general, the Novritsch SSP5 Charging Handle would be a great upgrade. This charging handle mounts in place of the rear sight, making it ideal for red dot equipped setups, allowing you to manipulate the slide far quicker and easier than before. This is the Left Side charging handle variant, meaning it protrudes to the left side of the pistol, perfect for right-handed shooters.

Whether you use your SSP5 as a primary weapon or as a steel shooting beast in AIPSC, this charging handle will change the way you use the platform and make racking the slide after a reload far easier and more intuitive than ever before. Weighing in a minuscule 5g, this won't slow your SSP5 down one bit!

If you're running a high-performance Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.46g Sniper BBs will help you get the most out of your setup. Supplied in a resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out. 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. Feed your sniper rifle with the ammo it deserves! These BBs are second to none when it comes to long-range engagements. The pure white colour allows you to track the full trajectory of your BBs no matter how far they travel.

If you've put a strong spring in your SSG10 and want to cock it easily, the Novritsch Enlarged Bolt Handle for SSG10 is what you need! Constructed from aluminium with a deeply textured surface, this bolt handle is designed to provide extra purchase for easier cocking and faster follow-up shots.

The Enlarged Bolt Handle is also shaped to provide clearance for any optical sight you may have mounted, avoiding smashing your knuckles on your scope when working in a hurry. Whether you need more grip on your SSG10 for wet weather skirmishes or faster follow up shots the Novritsch Enlarged Bolt Handle is ideal for the job!

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

The Novritsch HPA Connector - EU Type is designed to screw into a compatible gas magazine, replacing the gas inlet valve. This then allows you to attach an EU spec HPA line to your magazine. HPA is popular due to its consistency and performance in cold weather games, however, it does require a lot of modification which is not covered by the Patrol Base or Novritsch warranty.

You must ensure that your HPA system is EU spec and not US spec as they are not cross-compatible and the Novritsch HPA Connector - EU Type will not work with a US spec HPA line. Make your compatible gas magazines HPA-ready so you don't notice a dip in performance during those cold winter skirmishes, or you desire an incredibly consistent performance all year round.

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield. 

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.40g Sniper BBs will help you get the most out of your setup. Supplied in a resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. Feed your sniper rifle with the ammo it deserves!

Do you want to push your Novritsch SSG10 to the next level? The Novritsch SSG10 Cylinder Head Gen2 will help you achieve this dream. This machined stainless steel cylinder head has been optimised to make it more consistent and powerful. The thread has an optimal length to maximise the cylinder volume and the shape of the cylinder head has been slightly tweaked for a better air seal. 

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10. Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

Turn your regular airsoft rifle into a DMR-ready monster with the Novritsch DMR Stock. It doesn't only look the tactical part, but it also features a fully adjustable and modular cheek rest so you can line up the perfect shot without the neck pain! This is a must-have for any semi-auto skirmisher who wants a stock that will ensure the edge over their opponent. It is designed to fit over a regular AR/M4/M16 buffer tube, both electric and gas-powered rifles.