A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

If you need a lightweight suppressor or tracer unit with licenced trademarks to complete your build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit is a fantastic choice. This is the direct thread version, pre-fitted with a 14mm CCW male thread insert for most Airsoft AEG/GBBR platforms and packaged with an 18mm CCW male thread insert for more unconventional platforms.

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

One of the main perks of the Direct Thread mounted version of the Resistance 22M is its low weight, tipping the scales at under 160g for the tracer version. Coupled with its short overall length, this means you can rock the sneaky look without making your primary overly front-heavy or unwieldy. If you like your licenced goodies and need a sleek suppressor to finish off your latest build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit should keep you happy!

A compact, functional and straightforward collapsing Stock for M4 / M16 AEGs, beautifully constructed by PTS. If you're looking for a high-quality Stock that's ergonomic and functional, look no further.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

Crafted for users who do not require or want the large battery space and storage capability of crane stocks and prefer a lighter, simpler, and more compact stock. 

Crafted for users who do not require or want the large battery space and storage capability of crane stocks and prefer a lighter, simpler, and more compact stock. 

If you like the economical and performance benefits of an AEG but cannot resist the urge for recoil, the PTS Syndicate Radian® Model 1™ M4/AR-15 ERG AEG should be your next primary! Made with the phenomenal build quality PTS Syndicate has become known for, the Radian Model 1 ERG makes use of the KSC/KWA AEG3+ gearbox paired with the ERG recoil system, giving you violent feedback each time you pull the trigger; perfect for realism fans!

This latest version of the ERG system no longer has the "bolt stop" function but now includes a programmable MOSFET/ETU system. Available functions include pre-cocking, burst mode, trigger sensitivity adjustment, brushless motor mode and equaliser, which from what we can tell means trigger reset adjustment. Setting aside its internals, the Radian Model 1 is outfitted with all of PTS' finest ergonomic upgrades, including the Raptor™ ambidextrous charging handle, Talon™ ambidextrous fire selectors, EPG pistol grip and EPS battery stock, giving you a setup which you'll never need to enhance to run to its full potential!

Compatible with both ERG pattern magazines and standard M4/AR-15 AEG magazines, this is anything but your standard M4 AEG! Its highly modernised receiver and well-designed ambidextrous controls put the Radian® Model 1™ M4/AR-15 ERG AEG in a league of its own, with handling to rival the best and ready for all the most cutting-edge accessories!

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

If you're working on an SBR build with a Sandman suppressor, the PTS Syndicate Dead Air KeyMicro Flash Hider is the perfect finishing touch! This steel flash hider replicates the real Dead Air KeyMicro Flash Hider, the shortened variant of the full-size KeyMo Flash hider. Like its longer relative, the KeyMicro Flash Hider is compatible with PTS Dead Air Sandman QD suppressors and mounts to 14mm CCW male threads but its squat, aggressive styling makes it very well suited to modern SBR builds.

Whether you're running a PTS Sandman suppressor or not, this uniquely styled tri-prong flash hider will give your build an elite yet discrete front-end accent with the pre-requisite top-tier PTS Syndicate build quality and official licencing from Dead Air Silencers!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you're in search of a beastly muzzle brake to finish off your build, the PTS Syndicate Dead Air KeyMo Muzzle Brake is a fantastic choice. Offering official licencing from Dead Air Silencers and steel construction, this muzzle brake adds an aggressive edge to whatever platform it is mounted on, along with compatibility with the PTS Dead Air Sandman series of QD suppressors.

Designed to mount to any 14mm CCW male threaded outer barrel, the KeyMo Muzzle Brake is what you need if you're running a PTS Dead Air KeyMo suppressor and prefer the mean looks of a muzzle brake over the tri-prong flash hider supplied with the Sandman series!

If you're running a compact platform with a PTS Dead Air Sandman suppressor, your build is begging for the PTS Syndicate Dead Air KeyMicro Brake! This muzzle brake is constructed from steel and compatible with 14mm CCW male barrel threads, offering a uniquely aggressive shortened design with KeyMo suppressor compatibility. This means you can mount PTS Dead Air Sandman-S, Sandman or Sandman-K suppressors quickly and easily, along with any as-yet unreleased KeyMo interface suppressors from PTS.

Being licenced by Dead Air Silencers means the KeyMicro is as close to the real thing as you can get, with flawless machining throughout and a unique, modern design. Whether you're running a Sandman suppressor or not, the Dead Air KeyMicro Brake from PTS Syndicate is the perfect finishing touch to any SBR build!

If you're running a laser and flashlight on your primary, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular will make using these devices that bit easier! Designed to provide a single control location for both your flashlight and laser, the TAPS can be installed wherever you need it on any 20mm Picatinny, M-LOK or KeyMod rail system via its innovative modular mount. Forget using Velcro or zip-ties to keep your tatty pressure switches on board, the TAPS will keep your primary neat and furnish it with the high-end Unity Tactical look!

The innovation doesn't end with the mount either! Unlike comparable clones, the TAPS offers a modular plug system providing broad compatibility with the most common lights and lasers out there. Included in the set is a SureFire plug, an Insight plug, a silver plug for 3.5mm jacks and a gold plug for 3.5mm jacks, which can be used in whatever configuration suits the user.

Putting control of your light and laser literally beneath your fingertips, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular is not only user-friendly but also boasts official licensing from Unity Tactical, completing the elite look with licensed trademarks. If you're working on a build which needs the high-end look, the TAPS belongs on your gat!

If you have an M4 with a rapid rate of fire, these magazines can easily keep up! The TPM-AR is one of the latest enhanced magazines from PTS Syndicate, a brand well known for its premium mags. The TPM-AR is compatible with practically any M4 AEG and is styled after the iconic design seen everywhere in Airsoft. This magazine is a spring-fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

If you're running a flashlight and laser on a compact primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will make your setup more intuitive to run than ever before! Designed to take up as little rail space as possible while providing functionality similar to the Unity TAPS switch, the AXON is about as small as dual switches get, measuring approximately 7cm end to end. The integrated mount fits 20mm Picatinny rails but an M-LOK adapter plate is included, allowing you to fit the AXON to M-LOK slots.

The set includes a silver 2.5mm plug, a gold 2.5mm plug, a Crane plug and a SureFire plug, all of which are compatible with other plugs in the PTS Unity ecosystem. Each button on the AXON switch can be operated in both momentary-on and constant-on modes. For the angled switch, a half-press activates constant-on and a full press activates momentary-on. With the flat switch, a single press provides constant-on, and a double tap provides momentary on.

Designed with ergonomics in mind, the AXON can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. If you're sick of the struggle of running multiple pressure switches and seek a more professional looking primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will give you what you need!

If you're running a flashlight and laser on a compact primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will make your setup more intuitive to run than ever before! Designed to take up as little rail space as possible while providing functionality similar to the Unity TAPS switch, the AXON is about as small as dual switches get, measuring approximately 7cm end to end. The integrated mount fits 20mm Picatinny rails but an M-LOK adapter plate is included, allowing you to fit the AXON to M-LOK slots.

The set includes a silver 2.5mm plug, a gold 2.5mm plug, a Crane plug and a SureFire plug, all of which are compatible with other plugs in the PTS Unity ecosystem. Each button on the AXON switch can be operated in both momentary-on and constant-on modes. For the angled switch, a half-press activates constant-on and a full press activates momentary-on. With the flat switch, a single press provides constant-on, and a double tap provides momentary on.

Designed with ergonomics in mind, the AXON can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. If you're sick of the struggle of running multiple pressure switches and seek a more professional looking primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will give you what you need!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you're refurbishing an old helmet or need to replace some ageing padding, PTS has your back! The Comfort Pads for PTS MTEK FLUX Helmet mount to the internal Velcro inside FLUX and other helmets, allowing you to get the perfect fit on your noggin thanks to their modular design.

While designed specifically for the PTS MTEK FLUX Helmet, these pads should fit most other helmets with removable padding and internal Velcro, making them a great upgrade for extra comfort. Whether you seek replacement padding for hygiene reasons or your helmet slides around on your head as you run, the PTS Syndicate Comfort Pads for PTS MTEK FLUX Helmet are ideal!

If you're looking for more capacity on your ASG Scorpion EVO AEG and you hate high-caps, the PTS Syndicate EPM-E9 110rnd Magazine for ASG Scorpion Evo AEGs is what you need! As with other PTS EPM magazines, the E9 is constructed from high-density Dupont Zytel polymer, the best of the best when it comes to polymers used in Airsoft.

The E9 magazine is loaded like any other mid-cap, simply load through the fill/feed port on the top using an Airsoft speed loader or loading rod. Unlike other mid-caps, the E9 magazine provides empty magazine cutoff, also known as "bolt lock", just like the original EVO mags.

The high-vis orange follower allows you to track when the mag is fully loaded through the clear witness window on each side and take a quick glance at the top of the mag with it removed to confirm you still have ammo inside. On each side and the baseplate, we are treated to a dot matrix so you can mark your magazines and keep track of which is which. The front and rear of the E9 mag also include linear texture to improve handling for easier reloads, particularly in wet conditions. If you need more mags for your CZ Scorpion EVO with more capacity than the originals, load up on PTS Syndicate EPM-E9 mags!

If you have a premium EU-style pistol such as the PTS Syndicate ZEV OZ9, you need this magazine! The PTS Syndicate SAM 25rnd GBB Magazine is as good as it gets when it comes to Airsoft pistol magazines. With a plethora of quality upgrades, this magazine is worth every penny.

It's compatible with most EU-style pistols, including Tokyo Marui and any clone of that model, making it very versatile if you enjoy that pistol style. The SAM magazine is designed for performance and durability, making it perfect for all skirmishers. Pick yours up today and dominate the battlefield!

If your primary weapon boasts a 1913/20mm Picatinny stock setup, you absolutely need this stock to mount on it! The PTS Syndicate 1913/20mm Picatinny Folding Skeleton Stock is designed to mount to any 20mm Picatinny rail, however, that's not an invitation to mount it to your handguard!

The stock is constructed from high-density polymer with skeletonised cutouts for even more weight reduction. This stock is absolutely perfect for a compact rifle or SMG build, and with the included ASG Scorpion EVO adapter, you can mount it on that iconic replica easily. If you seek an ultra-compact and minimalistic solution to your stock problem, the PTS Syndicate 1913/20mm Picatinny Folding Skeleton Stock is perfect for you!

Those lucky enough to be rocking a Tokyo Marui Next Generation Recoil System (NGRS) AEG can now lock and load with the best magazines in the Airsoft industry! The PTS EPM magazine has been around for some time now in one form or another and is now offered to NGRS users (M4, 416 and SCAR-L), granting superb built quality, unparalleled feed speed and reliability. The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great matt finish.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

Luxury meets GLOCK, that's how the PTS Syndicate OZ9 "Premium Combat" GBB Pistol can be described! If you need something ridiculously fancy, this pistol is perfect for you. Constructed from high-density polymer and 7075 aluminium, a.k.a the same stuff used in aerospace travel!

If you know about the real steel pistol, you will know its unique feature, which the Airsoft variant also has. The unique feature is the modular aluminium frame, integrated fire control unit and polymer grip that can be swapped out via a single takedown pin, making future modifications and maintenance a breeze!

If you're in search of a pistol that's absolutely worth bragging about, you have found it with the PTS Syndicate OZ9 "Premium Combat" GBB Pistol!

If your PTS EPM1 mag is worn out, you must have done a lot of shooting! To fix it up, the PTS Syndicate EPM1 Spring Replacement Set is what you need! The set includes the feed spring, follower and associated parts, making it a fine replacement for magazine internals that have quite literally been through the wars and a great option for those who've lost their spring or follower to the carpet monster!