- Can Store Tools & Snacks
- Perfect For Front Wired AEGs
- Internal Battery Compartment
A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.
- Can Store Tools & Snacks
- Perfect For Front Wired AEGs
- Internal Battery Compartment
A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.
- Polymer & steel construction
- Mounts to M-LOK slots
- Fits most QD sling swivels
If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.
Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!
- Polymer & steel construction
- Mounts to M-LOK slots
- Fits most QD sling swivels
If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.
Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!
- Alloy handle with polymer extensions
- Compatible with M4/AR15 AEGs and KWA ERG rifles
- Officially licenced by Radian via PTS Syndicate
If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.
To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!
- Alloy handle with polymer extensions
- Compatible with M4/AR15 AEGs and KWA ERG rifles
- Officially licenced by Radian via PTS Syndicate
If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.
To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!
- Replacement internals for ODIN M12
- Includes crank wheel, handle, internal gear
- Great to fix up an old loader!
If you have worn out your ODIN M12 speed loader we bet you are missing it dearly! Fortunately you now have the opportunity to fix it up rather than fork out for a new one! The ODIN Innovations M12 Sidewinder Rebuild Kit includes a full set of internals for the M12 sidewinder, constructed from the same high strength polymer as the original parts. You will need your outer shell, and all the pins and screws, but this set includes the magazine catch, winding wheel and all of its internal parts.
- Flash Hider Included
- Quick detach interface
- Machine fluted surface
The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.
- 150rnd Capacity
- For AK AEG series
- Strong feed spring - Great for high rates of fire
If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.
- High rise mount for T1 / T2 Style
- Minimalist aesthetic
- Built in iron sights
The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.
- CNC Aluminium construction
- M-LOK & 20mm Picatinny interfaces
- Compatible with M4/AR-15 platforms
If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.
The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.
Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!
- CNC Aluminium construction
- M-LOK & 20mm Picatinny interfaces
- Compatible with M4/AR-15 platforms
If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.
The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.
Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- CNC 6061 Alu construction
- Licenced by Griffin Armament®
- Direct thread version - For 14mm/18mm CCW
If you need a lightweight suppressor or tracer unit with licenced trademarks to complete your build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit is a fantastic choice. This is the direct thread version, pre-fitted with a 14mm CCW male thread insert for most Airsoft AEG/GBBR platforms and packaged with an 18mm CCW male thread insert for more unconventional platforms.
The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.
The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.
One of the main perks of the Direct Thread mounted version of the Resistance 22M is its low weight, tipping the scales at under 160g for the tracer version. Coupled with its short overall length, this means you can rock the sneaky look without making your primary overly front-heavy or unwieldy. If you like your licenced goodies and need a sleek suppressor to finish off your latest build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit should keep you happy!
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- CNC 6061 Aluminium alloy construction
- Steel flash hider included
- Licenced by Griffin Armament®
If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR.
The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.
The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.
Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!
- PTS MEC Enhanced internal series
- 2x Enhanced HOP rubbers/buckings
- Two contact surfaces for improved consistency
The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.
- Stippled Butt Pad
- No Tool Installation
- Multiple Sling Points
Crafted for users who do not require or want the large battery space and storage capability of crane stocks and prefer a lighter, simpler, and more compact stock.
- Stippled Butt Pad
- No Tool Installation
- Multiple Sling Points
Crafted for users who do not require or want the large battery space and storage capability of crane stocks and prefer a lighter, simpler, and more compact stock.
- Protected Rubber Base
- Magazine Fill View Port
- Mid-Cap Magazine
A medium capacity (mid-cap) magazine designed for use with Airsoft 6mm Electric Guns (AEG). The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.
The BB guide of the magazine is coloured bright orange, allowing you to see the amount of rounds remaining, from the top, side and lower part of the magazine, allowing you to pick up the mag and letting you know exactly how many rounds are remaining.
- CNC 6061 Alu construction
- Licenced by Griffin Armament®
- For Griffin muzzle devices & A2 birdcage flash hiders
If you're looking for a stylish muzzle device which can mount to multiple platforms, the PTS Syndicate Griffin Armament® QD Blast Shield Gen 2 should suit! This Blast Shield is made from CNC machined 6061 aluminium and is licenced by Griffin Armament®, meaning flawless dimensional accuracy and full compatibility with PTS's range of Griffin Armament M4SD muzzle devices.
One of the neat tricks the QD Blast Shield has up its sleeve is the ability to mount to most A2 birdcage style flash hiders, meaning if you don't have a PTS Griffin Armament flash hider there is a high likelihood this will fit your original flash hider. Please note, as tolerances can differ between manufacturers, we cannot guarantee compatibility with all A2 birdcage flash hiders.
The QD Blast Shield mounts via its Gate-LOK™ QD mechanism, requiring the circular leaf spring at the base of the suppressor to be pulled away from the collar and the QD mech lifted up and out of the device, allowing it to slip over your flash hider and be locked into place. We suggest proceeding with care when installing this device on non-PTS Griffin muzzle devices as you may damage its flawless finish!
- CNC 6061 Alu construction
- Mounts to 14mm CCW male threads
- Tracer or Non-Tracer versions available
If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (GeneralPurpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point.
The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!
The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.
If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!
- 150rnd Capacity
- Dupont Zytel polymer build
- Fits CA, CYMA, A&K & E&C SR-25 AEGs
If you're running a big-boy AR and need high-quality magazines, the PTS EPM-LR 150rnd Mid-cap Magazine for SR-25/AR-10 AEG is essential! Made from super-strong DuPont Zytel high density polymer, the EPM-LR brings the high-end PTS pedigree to SR-25 and AR-10 style DMR platforms, offering 150 BB capacity loaded through the fill/feed window.
On each side, we are treated to PTS dot texture, enhancing wet weather handling as it does in the other superb magazines from the PTS EPM range. On the bottom, we're equipped with a "Mag-pod" style baseplate, allowing you to use the EPM-LR as a makeshift shooting rest for more stable long-range shots. Also on the baseplate is a "Dot Matrix", designed to allow you to mark your magazines for I.D purposes numerically.
Compatibility-wise, the EPM-LR is designed for Classic Army pattern SR-25 AEGs and should work in CYMA, E&C, G&P and A&K SR-25 replicas, but won't work in G&G or Ares/Secutor replicas. If you're running an upgraded SR-25/AR-10 replica, the PTS Syndicate EPM-LR 150rnd Mid-cap Magazine for SR-25/AR-10 AEG is the best way to feed it!
- 30rnd / 120rnd Switch
- ERG System Magazine
- Dupont™ Zytel Polymer
Buy a triple pack and save some money in the meantime! The latest PTS Enhanced Polymer Magazine that allows you to switch from a 30rnd to 120rnd capacity within a split second from the underside of the magazine! The most robust magazine on the market, a must for anyone seeking realism and reliability.
- CNC Aluminium construction
- M-LOK attachment interface
- For VFC, Tokyo Marui
If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.
It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.
It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!
- CNC Aluminium construction
- M-LOK attachment interface
- For VFC, Tokyo Marui
If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.
It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.
It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!
- Steel construction
- KeyMo QD suppressor compatibility
- For 14mm CCW male threaded barrels
If you're working on an SBR build with a Sandman suppressor, the PTS Syndicate Dead Air KeyMicro Flash Hider is the perfect finishing touch! This steel flash hider replicates the real Dead Air KeyMicro Flash Hider, the shortened variant of the full-size KeyMo Flash hider. Like its longer relative, the KeyMicro Flash Hider is compatible with PTS Dead Air Sandman QD suppressors and mounts to 14mm CCW male threads but its squat, aggressive styling makes it very well suited to modern SBR builds.
Whether you're running a PTS Sandman suppressor or not, this uniquely styled tri-prong flash hider will give your build an elite yet discrete front-end accent with the pre-requisite top-tier PTS Syndicate build quality and official licencing from Dead Air Silencers!
- Steel construction
- KeyMo QD suppressor compatibility
- For 14mm CCW male threaded barrels
If you're running a compact platform with a PTS Dead Air Sandman suppressor, your build is begging for the PTS Syndicate Dead Air KeyMicro Brake! This muzzle brake is constructed from steel and compatible with 14mm CCW male barrel threads, offering a uniquely aggressive shortened design with KeyMo suppressor compatibility. This means you can mount PTS Dead Air Sandman-S, Sandman or Sandman-K suppressors quickly and easily, along with any as-yet unreleased KeyMo interface suppressors from PTS.
Being licenced by Dead Air Silencers means the KeyMicro is as close to the real thing as you can get, with flawless machining throughout and a unique, modern design. Whether you're running a Sandman suppressor or not, the Dead Air KeyMicro Brake from PTS Syndicate is the perfect finishing touch to any SBR build!
About PTS Syndicate
When it comes to training, simulation and the Airsoft skirmish experience, PTS Syndicate stand out from the crowd. PTS have research and development teams located in both America and Asia which specialise in working out the best materials and manufacturing processes for high-quality Airsoft products.
PTS Syndicate specialises in a variety of Airsoft gear, featuring helmets, mounts and rails, so you can customise your loadout depending on the skirmish or your playstyle.