RIS/RAS Rail & Attachments

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

If you're looking for a replacement magnifier mount you're in luck! The Novritsch Flip Up Magnifier Mount fits magnifiers with a tube diameter of 30mm. when flipped up, it sits roughly 6cm above the rail, perfect for skirmishers with or without face masks. It is constructed from lightweight and durable aluminium, making it perfect for players who like to stay light on their feet but remain a threat at range.

To flip this sight, simply push on it and it will lock upright or to the side, this makes it fast and easy to adjust between long and close-range engagements. If you have a magnifier but are missing the mount, the Novritsch Flip Up Magnifier Mount - 30mm is for you!

If you fancy turning your 9" "HAVOC" under barrel launcher into a stand-alone platform then this is the product for you! The EMG KAOS Conversion Kit provides the chassis for mounting a pistol grip and stock so you can carry your launcher as a powerful sidearm. It is compatible with the EMG 9" "HAVOC" Launcher only, as it has been designed to accommodate the specific shape and size of that MOSCART launcher.

The "HAVOC" launcher slides onto the bottom section of the 20mm Picatinny rail, giving you the full top section for some tactical accessories like a scope or flashlight, whatever looks the most menacing! The Chassis is compatible with real steel or GBBR pistol grips and buffer tube spacers/sling plates. The buffer tube is compatible with regular M4/AR-15 stocks so you can customise this conversion kit to make it unique to you!

The chassis and buffer tube are both constructed from durable alloy, sure to survive anything a skirmish has to throw at you. The buffer tube threads into the chassis, just make sure you know what you're doing before installation to avoid damaging anything. If you fancy a stand-alone launcher as a sidearm, the EMG KAOS Conversion Kit For 9" HAVOC Grenade is the easiest way to convert an under-barrel launcher into one!

Have you treated yourself to a brand-new EMG 40mm MOSCART "HAVOC" 12" Grenade Launcher? Well, with this Spike's Tactical licensed conversion kit, you can turn it into a stand-alone launcher! It is compatible with the EMG "HAVOC" Launcher only, as it has been designed to accommodate the specific shape and size of that MOSCART launcher.

The "HAVOC" launcher slides onto the bottom section of the 20mm Picatinny rail, giving you the full top section for some tactical accessories like a scope or flashlight. The Chassis is compatible with real steel or GBBR pistol grips and buffer tube spacers/sling plates. The buffer tube is compatible with regular M4/AR-15 stocks so you can customise this conversion kit to make it unique to you!

It is constructed from a durable alloy to ensure it can survive skirmishing and the buffer tube simply threads into the chassis, just make sure you know what you're doing before installation as to avoid damaging anything! So, if you fancy turning your under-barrel launcher into a stand-alone platform for some close-quarters domination, the EMG KAOS Conversion Kit For HAVOC Grenade Launcher is perfect for you!

If you're running a VZ.58 and want to add optics, lasers, flashlights and grips, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need. Compatible with the Ares and Delta Armory VZ.58 AEGs, this handguard is made from CNC machined aluminium, giving it flawless machining and perfectly in-spec rails, ready for your mission essentials. 20mm Picatinny rails are present at the 3, 6, 9 & 12 o'clock positions with weight reduction ports in various places to keep your front end light and agile. 

Installation is relatively simple, requiring you to remove your existing handguard via the retention pin and replace it with this in the same way you would when installing your battery. Another perk of adding this RAS handguard is the ability to use an external battery box for more power on tap and easier battery changes. If you're going for the PMC look with your VZ.58, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need to complete it!

If you're looking for a sleek new look for your M4/AR-15 or AR-9 AEG, check this out! The EMG Daniel Defense RIS III 12.5" M-LOK Handguard is officially licenced by Daniel Defense via EMG, boasting licenced trademarks across the design and flawlessly imitating the profile of the real DD RIS III handguard. 

The RIS III handguard is an advancement from the DD RIS II, the handguard seen on the iconic MK18 MOD.1 rifle used by the US Navy SEALs, Delta and all the other big names in the US Armed Forces. The RIS III saves weight by using M-LOK slots on the side and bottom but retains the military style two-piece construction, designed to allow an M203 Grenade Launcher to be mounted with the lower segment removed. 

Up top, we have a full length 20mm Picatinny rail, ready for your lasers, flashlights or other tactical dodads and on the sides and bottom, M-LOK negative space attachment slots, ready for your choice of M-LOK accessories or 20mm Picatinny rail adapters. Like other M4/AR-15 handguards, you'll need an AR-15 Armourers wrench to install this and the set includes the correct barrel nut to mount it. If your AR is a bit on the heavy side and aging rapidly, the EMG Daniel Defense RIS III 12.5" M-LOK Handguard will give it a spritely, energetic feeling and modernise it to the cutting edge!

If you want a striking new look for your AK, the 5KU CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs will do the trick! This CNC aluminium chassis transforms the AK design, bringing it into line with more modern platforms with M-LOK slots, a lengthy 20mm Picatinny rail up top and a dynamic, angular look. 

Compatibility-wise, this kit is designed for CYMA AK AEGs of the CM.04x and Cm.05x series using the VFC external construction style. It may fit other VFC-style AKs but won't fit AKs based on the TM AK-47 AEG (CM.028, CM.5xx, CM.03x & JG AKs) nor will it fit AKS-74U AEGs. If your AK needs a 21st-century facelift to compete with modern designs, kit it out with the CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs from 5KU!

A lightweight and durable mount for fitting your torch to any 20mm RIS/RAS rail.

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you love the way the AAP-01 shoots but don't get along with its looks, the Action Army Black Mamba Type A Upper Receiver for AAP-01; CNC Alu belongs on your shopping list! Made from superb quality CNC machined aluminium with steel iron sights, this is the Type A version, furnished with a futuristic hexagonal machined pattern on either side which only adds to its menacing aesthetic.

Up front, the Black Mamba is rocking an aggressive muzzle brake with a dynamic shape which blends seamlessly with the receiver itself, mounting to 14mm CCW male barrel threading at the front. If you want to run a tracer for improved instinct aiming in low light, unscrew the knurled nut at the front to remove the muzzle brake to access the barrel threads.

Up top, we have a pair of adjustable iron sights; a light-enhancing front sight with an adjustable anti-glare rear sight. These sights are fantastic to use and very modern, though the integral 20mm Picatinny rail running between also allows you to mount a red dot sight or scope. On the bottom, we have another built-in 20mm Picatinny rail, ready for your tactical flashlight or aiming laser. The Black Mamba Type A is compatible with both the AAP-01 Assassin and the AAP-01C Shinobi and is what you need to make your AAP stand out!

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

A replica PEQ-15 device from Nuprol that provides torch illumination, a visible red laser pointer and IR laser pointer - all in one compact package!

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.