Guns Featuring RIS/RAS Rail

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you're in the market for a new CQB primary and need a full metal build with a fancy programmable MOSFET, your standards are certainly high! Lucky for you, Delta Armory has what you need with the DA-A18-EGL ALPHA™ TALOS 3 PDW M4/AR-15 AEG!

This full metal M4/AR-15 AEG boasts full metal externals with the ultra-modern Delta Armory receiver design, a sleek and compact PDW stock and the Delta Armory EAGLE™ programmable MOSFET at the heart of the internals, offering the option of burst mode, binary trigger, semi-auto only, sniper delay, progressive trigger (AUG mode), precocking and trigger sensitivity adjustment. A seriously advanced bit of kit, the EAGLE allows you to program all of these modes using the trigger and fire selector only, with no need for apps, programming cards or other hidden costs!

The EAGLE™ joins the reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings, SHS piston and tappet plate, and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, resulting in a superb firing experience with far more pre-upgraded parts than a platform in this price range deserves! If you like to move fast in CQB with a full metal primary, the Delta Armory DA-A18-EGL ALPHA™ TALOS 3 PDW M4/AR-15 AEG is the ideal primary!

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

If you are wanting to get into Airsoft skirmishing, look no further than the CM.125, a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent.

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into action right away.

Constructed with an alloy mock slide and polymer frame, the CM.125 is lightweight and efficient at both semi and full auto, this pistol has everything you need to get started with your first Airsoft sidearm!

If you're searching for a top-tier primary you'll never need to upgrade, get eyes on the Novritsch SSR4 Mk2 M4/AR-15 AEG! This is the latest iteration of the SSR4, boasting a fresh new look with its unique receiver, handguard and muzzle brake design with all the best bits from the original game-changing SSR4 platform.

Inside, you'll find CNC steel 16:1 gears, a 30K high-torque motor, CNC aluminium compression parts and a 6.03mm tightbore inner barrel paired with a rotary TDC HOP-up unit, just like the original. What's changed? The Mk2 boasts a super-strong reinforced gearbox shell and modular adjustable trigger system, resulting in a longer lifespan and more customization options than ever before!

On the outside, a lot has changed, including a new magnetic dust cover for more convenient HOP-up adjustment, a new buffer tube mount design which allows for easier access to the quick change spring system, not to mention the exterior design which leans into the Novritsch aesthetic with its dynamic swept back handguard and muzzle brake design. If you're after an M4/AR-15 platform with proven internals designed for pure skirmish performance and packed with user-friendly features, the Novritsch SSR4 Mk2 M4/AR-15 AEG is the one!

If you're sick to death of M4/AR-15 AEGs, who can blame you? The Novritsch SSR77 A2 AUG AEG is a breath of fresh air, based on the old-school-cool AUG design with modern attachment interfaces and pre-upgraded internals throughout, ideal for the skirmisher who wants a unique primary platform with performance to match the latest M4 AEGs to hit the market.

On the outside, the SSR77 A2 is dressed to impress, boasting a unique CNC aluminium M-LOK handguard, reduced profile upper 20mm Picatinny rail and a pair of QD sling sockets on each side, ready to be decked out like the most cutting edge M4s. Inside, things are even more impressive! This is one of the first AUG replicas to hit the market with a programmable MOSFET pre-installed, meaning SSR77 owners can join the SSR4, UTR45 and Gate TITAN owners enjoying burst mode, binary trigger and several levels of pre-cocking adjustment. If you've ever mourned that all the sick technology is in M4 replicas, the SSR77 A2 AUG AEG should put a smile back on your face!

If you have been looking for the best GLOCK 17 replica around, you will want to consider this! The GLOCK 17 Ultimate Edition from Umarex is the most realistic Glock Airsoft replica on the market by a significant margin. This Glock sports a CNC machined steel slide which is absolutely 1:1 with the real GLOCK 17, unlike others which are GLOCK 21 sized. The outer barrel is also steel, and the magazine is polymer! The result is a GLOCK replica unlike any other, with a completely different feel which perfectly matches the balance and handling of the real thing. This is the Ultimate Glock for collectors!

Straight out the insanely popular video games series Resident Evil, this pistol makes sure you're ready for the inevitable zombie apocalypse (or zombie themed skirmish).

With full metal construction and flashy silver slide, the Biohazard comes with a whole host of features including an aggressive muzzle device, front Picatinny rail, de-cocker and extended mag.

Zombies or no zombies, this pistol will leave the competition dead and buried.

Based on the EU Series of pistols, this replica is part of the VORSK EU range of pistols. It has an integrated Red Dot Sight which aids in rapid target acquisition and makes it stand apart from others like it, as well as a Full Automatic setting and realistic Gas Recoil to keep the enemy at bay.

Introducing Perfection, The UMAREX GLOCK 17.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 17 Co2 Deluxe kit. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals.

With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic.

What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Looking to get into the sport and start skirmishing? The iconic style of the F226 might be up your street.

Electrically powered, with both semi and fully automatic functionality, the pistol also sports a 20mm RIS / RAS rail to accommodate a wealth of tactical accessories for those more spec ops style missions.

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you're into the race gun look and the performance advantages which come with it, you'll be a big fan of the P06 Slipstream EU17 Gas Blowback Pistol from Delta Armory! Boasting full metal construction, a dynamic weight-reduced ported slide, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, this EU series comes customised straight out of the box with stylish, elite looks.

The P06 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

If you prefer speedy styling over standard mil-spec sidearms, the P06 Slipstream EU17 Gas Blowback Pistol is the Delta Armory pistol for you. With a super-slick external design inspired by the best real steel pistols on the market, the P06 Slipstream looks far more expensive than it actually is!

If you're into the race gun look and the performance advantages which come with it, you'll be a big fan of the P06 Slipstream EU17 Gas Blowback Pistol from Delta Armory! Boasting full metal construction, a dynamic weight-reduced ported slide, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, this EU series comes customised straight out of the box with stylish, elite looks.

The P06 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

If you prefer speedy styling over standard mil-spec sidearms, the P06 Slipstream EU17 Gas Blowback Pistol is the Delta Armory pistol for you. With a super-slick external design inspired by the best real steel pistols on the market, the P06 Slipstream looks far more expensive than it actually is!

If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.

The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!

The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.

Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!

An Airsoft 6mm BB Gun, designed and built to look and be a functional replica of an AK74 Assault Rifle, but also features more modern body parts. The rifle is constructed mostly from Alloy, with an Alloy Receiver, Top Cover, Barrel, and Stock with Polymer Hand Guard and Grip.

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series.

If you seek an M4/AR-15 platform with reinforced internals focussed on reliability, the Delta Armory DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG is one to watch. Constructed with a strong high-density polymer receiver and a CNC aluminium handguard, the DA-B06 is perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Inside the DA-B06, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a KeyMod handguard equipped with pre-installed 20mm rail sections and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

If you like your primary simple, reliable and accessory-ready, the DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG will do what you need it to, with plenty of upgrade options down the line thanks to its full TM AEG compatibility. At the ideal length to contend with tight corners in CQB and distant enemies outdoors, the DA-B06 is a fantastic multi-role platform!

If you're into the British Army look, this should be your primary! The Ares SA80/L85A3 AEG; Deluxe Standard Issue Set includes everything you'll need to recreate the iconic L85A3 rifle as it is issued to the British Army, including a fantastic replica of the ELCAN Specter LDS 4x optic with the Shield RMS piggyback red dot sight and a Grip Pod replica in desert tan.

Just like the standard version, this beast boasts full metal construction and incredible attention to detail, making it as suitable for skirmishing as it is for display in a museum! The lower and upper receivers are both made from stamped steel, with the modernised A3 handguard and 20mm Picatinny top rail being CNC machined from aluminium for a flawless form and perfectly in-spec attachment interfaces.

Inside, the L85A3 is based around a unique gearbox shell with the Ares EFCS MOSFET, providing programmable fire controls through the Ares EFCS Programming Box (available separately) and preventing trigger lock-ups for a ferocious semi-auto response rate. A high torque motor drives the 18:1 steel gearset, allowing for stronger springs to be installed and further improving trigger response. To add a side of realism to the firing experience, the L85A3 also boasts an electric blowback system, cycling the mock bolt carrier back and forth with each shot and drowning out the gearbox report with a violent "clack-clack-clack".

If you're working on a modern British Army loadout and need a primary to finish it off, you can't ask for much better than the Ares SA80/L85A3 AEG; Deluxe Standard Issue Set. With the correct optic and vertical grip, 2 magazines and a superb quality hard case to store it all in, this is the L85A3 replica package for the skirmisher who wants the most realistic look without any problems sourcing the correct bits!

If you need more firepower without extra length, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty is ideal. Based on the real steel M203 grenade launcher used by Arnie in Predator and serving with the US Army from the late Vietnam War right up until the present day, this M203 is the "Super Shorty" version, even shorter than the "Short" version and ideal for compact SMGs and short-barrelled rifles. The pre-installed mount is a QD example for 20mm Picatinny rails, meaning you can quickly mount it and remove it in seconds depending on the situation at hand.

Like other Airsoft M203s, the A&K Super Shorty uses 40mm MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, sending between 18 and 140 BBs downrange with a single pull of the trigger with a game-dominating spread, though specialised MOSCARTs which shoot different payloads are available. If you want to give your primary a more aggressive look with a firepower increase as a bonus, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty will give you what you need!

A railed Gas Blowback Airsoft Pistol manufactured by NUPROL designed to replicate the appearance and feel of a modern MEU 1911 pistol, which can accept 20mm accessories out of the box. This RIF comes pre-two-toned out of the box and means no waiting around watching paint dry!

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN MK16 SCAR-L 10-inch AEG! This full metal SCAR-L replica is flawlessly made, with some incredibly sharp machining paired with superb quality polymer parts in all the right places. This SCAR-L has a realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. It keeps your gearbox cycling at maximum efficiency and with pre-cocking set, you can achieve an incredibly snappy trigger response perfect for rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears, a quick change ball-bearing spring guide and a high-speed motor to top it off!

If you want a unique primary that boasts impressive internals for battlefield domination, the Cybergun FN MK16 SCAR-L 10-inch AEG is the rifle for you!

If you need a full metal sidearm with custom styling and entry-level pricing, you sure are picky! Thankfully, Delta Armory has met your demands with the P05 Tiger EU17 Gas Blowback Pistol. This GBB pistol is internally based on the Tokyo Marui EU17 system, giving it an almost unlimited aftermarket of customisation and upgrade options, though it's pretty darn custom as it comes! Fitted with a stylish custom slide based on the real steel ZEV SOCOM slide, the violent-looking sawtooth serrations really make this one stand out!

Completing the customised aesthetic, the P05 is also equipped with a super-grippy imitation hand-stippled frame, a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

Supplied in a hard polymer storage case complete with wave foam padding, the P05 is a generous package for those who like custom looks without all the fitting hassle. If you're into mean-looking pistols based on the best of the best in the real steel pistol world, the Delta Armory P05 Tiger EU17 Gas Blowback Pistol will definitely put a smile on your face!