Specna Arms Airsoft

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're after affordable heavy-weight BBs, Specna Arms ONE 0.30g 6mm BIO BBs are a fantastic option. Supplied in a resealable bag containing 1000 BBs approximately, these BBs are made from biodegradable materials, making them great for outdoor target shooting and skirmishing alike.

These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're trying to feed an ammo-hungry LMG without emptying your wallet, Specna Arms ONE 0.30g 6mm BIO BBs are a great way to do it!

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. 

This, the latest version of the SA-C08 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

Infinitely functional and incredibly comfortable, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms offers modern looks, an ergonomic shape and a massive internal battery compartment. Although branded as 'Heavy Ops', this stock is anything but, being constructed from lightweight yet strong high-density polymer to keep your setup light, agile and well balanced.

The internal battery compartment can be accessed by pushing the two tabs at the toe of the stock through, after which the butt plate will pop off. Inside, you'll find a pair of generous 17 cm long battery compartments, ideal for crane/nunchuck configuration batteries.

Amongst its many ergonomic perks, the Heavy Ops Stock features rubberised cheek rests for comfort and a thick serrated butt plate made from rubber for perfect traction in any weather conditions. The adjustment lever is ambidextrous and concealed within the "A-frame" shape, preventing equipment snags and keeping you agile in the field. If you need a substantial battery compartment but seek modern aesthetics, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms covers both bases!

An Airsoft electric rifle made from Zinc Aluminium and Steel, with a wealth of up-rated internal parts to make a rifle that shoots as great as it looks. Part of Specna's EDGE series, this rifle features an X-ASR MOSFET and quick change spring system as standard.

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

Need more stability for long-range shots? The Specna Arms Spring Loaded Bipod for Harris Lug will do the trick! Designed to mount to a Harris-style sling/bipod Lug by twisting the thumbscrew on the base so that a pair of 'pincers' will grab onto the Lug, then tightening it down for a firm fit, this bipod is ideal for milsim sniper rifle setups!

The Bipod has spring-loaded legs which can be extended to full length by pressing the button for each leg. Once deployed, you can adjust them between 6 different levels of extension. Each leg can be adjusted independently, allowing you to set your rifle up on uneven ground. When not in use, you can easily fold the legs back into place by hand, with no fiddly catches to defeat while you're pumped with adrenaline. The Rubber Feet on the bottom of each Leg make any Rifle stable when used on flat ground, and will provide ample grip and stability.

The Spring Loaded Bipod for Harris Lug mounts to Harris sling/bipod lugs, which are present on many Airsoft sniper rifle replicas, including most M40A1, M24 and VSR-10 replicas. If you're rocking one of these rifles and want to make it look the business while improving stability when shooting from static positions, the Specna Arms Spring Loaded Bipod for Harris Lug belongs on board!

If you're running the SA-F249 and keep running out of rounds, this should help! The Specna Arms 1500rnd Electric Box Magazine for SA-F249 AEGs is an electrically powered auto-winding magazine, boasting a whopping 1500 BB capacity loaded through the fill window on the left side of the magazine body.

This mag requires 2 AA batteries to function (not included), which are installed through the bottom of the bag by unzipping the fabric cover and popping open the battery compartment inside. Also inside the fabric cover is the activation switch, offering both "Sound Control" and "Auto" modes. Using sound control, the magazine will wind as the internal sensors detect shooting. The "Auto" mode is ideal for priming the magazine after insertion and adding extra tension in the event of misfeeds.

Compatibility-wise, this mag is designed for the SA-F249 FLEX™ but may work in other M249 AEGs, though we can't guarantee it. If you're running the featherweight SA-F249 and need to put more rounds down range, the Specna Arms 1500rnd Electric Box Magazine for SA-F249 AEGs will do the trick!

If you're in search of a long AR to complete your outdoor loadout, the Specna Arms SA-V30 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is a fine choice. Boasting the top-notch build quality Specna's ONE™ series has become known for, this is the updated version, fitted with the superb EShooter Kestrel Basic ETU/MOSFET.

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. The result is a remarkably snappy trigger when pre-cocking is set, the perfect feature for someone who needs fire supremacy in CQB to get the job done! Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The Specna Arms SA-V30 ONE™ is a full-length M4 platform with a 15-inch outer barrel and a steel 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, making it a beast outdoors, and with the right upgrades, a DMR capable of dominating any firefight. Its super-light aluminium handguard gives you plenty of space for a nice C-clamp grip, making it easy to steer between targets at an impressive pace. No matter what you plan to do with it, this Specna Arms SA-V30 is a great addition to your armoury!

If you've had a mishap with your Specna Arms SA-H EDGE 2.0 AEG, this might be the part you've been searching for! The Specna Arms Lower Receiver for SA-H Series EDGE 2.0 AEGs is an original replacement part made from alloy, a stripped lower receiver ideal for replacing a cracked, damaged or broken lower.

The set includes a pre-installed fire selector switch and trigger guard but doesn't include body pins or other trim parts. Bring your EDGE 2.0 back to life with the Lower Receiver for SA-H Series EDGE 2.0 AEGs from Specna Arms!

If you're an AK kinda guy but want to stay light on your feet, the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG is your ideal primary! A revamped version of the original SA-J73, the HAL¹ ETU version keeps the best bits and adds some innovative new parts into the mix, with the HAL¹ programmable MOSFET taking centre stage.

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Also added to the updated SA-J73 is a new rotary AK HOP-up unit design, bringing rotary performance to the table to keep pace with ARs! Like the original SA-J73, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

If you're an operator on a budget and need an agile AK with advanced internals, the SA-J73 is exactly that. Rock solid despite its polymer build and kitted out on the inside with goodies you'd never expect at this price, you're in good hands on the field with the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG at your side!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG, made better than ever in its latest gen.2 form. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Like the original SA-C11, the Gen.2 version also has a polymer piston with a full steel tooth rack, ESA quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG, made better than ever in its latest gen.2 form. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Like the original SA-C11, the Gen.2 version also has a polymer piston with a full steel tooth rack, ESA quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you prefer the low weight and scratch resistance of a polymer receiver but need something a cut above cheap beginner AEGs, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG is ideal. A CQB optimised build made from high-density polymer with an alloy outer barrel and CNC aluminium handguard, the SA-C10 has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're put off the PRIME™ series due to its hefty metal build and want top-notch performance in a lightweight build, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG was made with you in mind! 

If you prefer the low weight and scratch resistance of a polymer receiver but need something a cut above cheap beginner AEGs, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG is ideal. A CQB optimised build made from high-density polymer with an alloy outer barrel and CNC aluminium handguard, the SA-C10 has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're put off the PRIME™ series due to its hefty metal build and want top-notch performance in a lightweight build, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG was made with you in mind! 

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. This, the latest "Gen.2" variant, has been revamped internally with premium parts, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're after a proven platform with a lightweight exterior and pre-upgraded internals, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG fits the bill!

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. This, the latest "Gen.2" variant, has been revamped internally with premium parts, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're after a proven platform with a lightweight exterior and pre-upgraded internals, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG fits the bill!

The SA-C07 CORE™ Gen.2 M4/AR-15 AEG is the latest, most advanced entry-level AEG from Specna Arms, equipped with many parts from the top-end PRIME™ series for more bang for buck than ever before! It features an entry-level price point, with a veteran-level pre-installed ETU, enhanced gearbox and upgraded HOP-up unit, straight out of the box. The AEG is also compatible with most Tokyo Marui V2-spec aftermarket upgrade parts, so it really is future-proof!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-C07 CORE™ Gen.2 M4/AR-15 AEG is one to watch!

The SA-C07 CORE™ Gen.2 M4/AR-15 AEG is the latest, most advanced entry-level AEG from Specna Arms, equipped with many parts from the top-end PRIME™ series for more bang for buck than ever before! It features an entry-level price point, with a veteran-level pre-installed ETU, enhanced gearbox and upgraded HOP-up unit, straight out of the box. The AEG is also compatible with most Tokyo Marui V2-spec aftermarket upgrade parts, so it really is future-proof!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-C07 CORE™ Gen.2 M4/AR-15 AEG is one to watch!

If you're looking for a highly flexible M4/AR-15 platform, the Specna Arms SA-C20 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG should suit you perfectly! Kitted out with some glorious externals with a skeletonised M-LOK handguard, crane stock and railed receiver, this M4 is a great choice for any skirmisher! This, the latest version of the SA-C20, has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you need a mid-length platform with a high-quality yet lightweight build ready for any challenge on the field, the Specna Arms SA-C20 CORE™ Gen.2 M4/AR-15 AEG is the way to go!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Need a battery and a charger for your upgraded AEG? Get both at once with the Specna Arms Set EASY Charger With an 11.1v 1000mAh Battery! This package has everything you need to get started with 11.1V batteries. The balance charger ensures that all your battery's cells are charged equally, it also works for 7.4V batteries.

11.1V batteries should only be used with upgraded platforms, the high voltage and discharge rate can cause excess wear on internal parts inside stock AEGs. However, if your Airsoft rifle is built to take 11.1V batteries you will notice an improved rate of fire, snappier trigger response and possibly even an increase in FPS.