Specna Arms Airsoft

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET or HAL MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

If you want to run your Specna Arms PDW stock-equipped rifle all day, this is what you will need. With a considerable amount more room than the original battery tube, this tube can take up to a 7.4v 1450mAh LiPo battery.

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

The Spenca CORE™ V2 Gearbox Shell provides 8mm bushings, radiused cylinder windows to help prevent cracks, and quick release spring functionality. Perfect for starting your ultimate gearbox build!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.

This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!