Valentines Day 2021: Cool bits under £50

If you're into modern shooting techniques and running PTS EPM Gen.2 mid-caps, these should interest you! The PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack are genuine real steel magazine enhancements designed for real P-Mag Gen.2 AR-15 magazines but also compatible with PTS EPM Gen.2 mid-cap magazines. 

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight, the PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack is what you need!

If you want to make your AK a little more... AK. Then the LCT AK104 Flash Hider is for you! This flash hider is a replica of the real steel AK104 trumpet-style flash hider. It attaches to 24mm CW threading and is constructed from steel, giving it a hefty weight and a realistic feel. It has a wear-resistant finish and its sturdy construction ensures that it will survive more than its fair share of skirmish-related bumps.

To fit this flash hider on more common threads you will need a 24mm to 14mm thread adapter. Give your AK the classic look with a real steel-styled flash hider and keep your AK in the 20th century, right where it belongs.

An ultra low-profile and tough Flip Cap for Objective Lenses with an outside diameter of 50-59mm, which has 270° of motion so that your cover can sit vertically or sat back on the scope. This is the perfect way to protect your lens in style when your rifle is not in use or in transport/storage.

A rugged and flexible Eyepiece Lens Cover for Telescopic Scopes with an Eyepiece diameter between 41.5mm and 46mm (1.6-1.8"). It offers a dual position cap and weatherproof defence against the elements. Ideal for protecting your lenses during transport or storage.

A replacement for your Airsoft gun's standard flash hider, this compact 14mm CW threaded compensator is a small way to dramatically alter the appearance of your Airsoft gun. 

In an intense Airsoft skirmish the adrenaline is flowing, and often with that comes the loss of fine motor skills. If you have ever fumbled a reload at a critical time, you will know what we are talking about! The Aluminium Magwell Type 3 from Airsoft Masterpiece is intended to solve this issue by providing a helpful flared guide to assist you in getting that magazine into the gun quickly and with ease. The wide flare of this magazine well makes it perfect for speed reloads, either in a skirmish or an IPSC competition, and can be particularly useful under pressure!..

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you're rocking the AAP-01 or AAP-01C and need a red dot sight to finish it off, the Action Army RMR Plate & Raised Sights Set for AAP-01 is the key. This set includes a raised front sight with a light-enhancing insert and a fixed rear sight with an integral RMR footprint mount plate, allowing you to mount a micro red dot sight for improved low-light accuracy and faster target acquisition!

Both the front sight and the rear sight/mount plate are constructed from steel, making them extremely robust and ideal for the aggressive skirmisher. This kit fits both the original AAP-01 Assassin and AAP-01C Shinobi but isn't compatible with the Action Army Folding Stock Kit. If you run your AAP-01 as a sidearm but need to get on target faster, pair the Action Army RMR Plate & Raised Sights Set for AAP-01 with an RMR footprint red dot sight and get busy!

If you're rocking a WETAC LV-119/Spirit Plate Carrier, this is the back panel you need! The WETAC Zip-Mounted Assault Back Panel is constructed to the same high standards as the WETAC Spirit itself, making use of 1000D Polyester, Carbon fibre, high-quality rubber and YKK© branded zips throughout the build.

This back panel is designed for teammates to access, equipped with 3 grenade pouches at the top and a utility pouch at the bottom with a Velcro I.D panel on the front. Each of the grenade pouches is secured with a carbon-fibre retainer with a glove-friendly rubber extension for easy access when the adrenaline is pumping.

As you might have guessed, the Zip-Mounted Assault Back Panel mounts to plate carriers with zip-equipped rear plate bags and is primarily designed for the WETAC Spirit. It may also fit other brands but we are unable to confirm this.

If you're rocking a WETAC LV-119/Spirit Plate Carrier, this is the back panel you need! The WETAC Zip-Mounted Assault Back Panel is constructed to the same high standards as the WETAC Spirit itself, making use of 1000D Polyester, Carbon fibre, high-quality rubber and YKK© branded zips throughout the build.

This back panel is designed for teammates to access, equipped with 3 grenade pouches at the top and a utility pouch at the bottom with a Velcro I.D panel on the front. Each of the grenade pouches is secured with a carbon-fibre retainer with a glove-friendly rubber extension for easy access when the adrenaline is pumping.

As you might have guessed, the Zip-Mounted Assault Back Panel mounts to plate carriers with zip-equipped rear plate bags and is primarily designed for the WETAC Spirit. It may also fit other brands but we are unable to confirm this.

If you're rocking a WETAC LV-119/Spirit Plate Carrier, this is the back panel you need! The WETAC Zip-Mounted Assault Back Panel is constructed to the same high standards as the WETAC Spirit itself, making use of 1000D Polyester, Carbon fibre, high-quality rubber and YKK© branded zips throughout the build.

This back panel is designed for teammates to access, equipped with 3 grenade pouches at the top and a utility pouch at the bottom with a Velcro I.D panel on the front. Each of the grenade pouches is secured with a carbon-fibre retainer with a glove-friendly rubber extension for easy access when the adrenaline is pumping.

As you might have guessed, the Zip-Mounted Assault Back Panel mounts to plate carriers with zip-equipped rear plate bags and is primarily designed for the WETAC Spirit. It may also fit other brands but we are unable to confirm this.

If you're rocking a WETAC LV-119/Spirit Plate Carrier, this is the back panel you need! The WETAC Zip-Mounted Assault Back Panel is constructed to the same high standards as the WETAC Spirit itself, making use of 1000D Polyester, Carbon fibre, high-quality rubber and YKK© branded zips throughout the build.

This back panel is designed for teammates to access, equipped with 3 grenade pouches at the top and a utility pouch at the bottom with a Velcro I.D panel on the front. Each of the grenade pouches is secured with a carbon-fibre retainer with a glove-friendly rubber extension for easy access when the adrenaline is pumping.

As you might have guessed, the Zip-Mounted Assault Back Panel mounts to plate carriers with zip-equipped rear plate bags and is primarily designed for the WETAC Spirit. It may also fit other brands but we are unable to confirm this.

Looking for a lightweight, simple and small profile method of keeping your pistol mag safe and accessible at all times? Look no further!

This elastic insert is perfectly sized to house a range of pistol magazines and can be attached anywhere on your loadout with some spare Velcro so you can customise your setup to how you play. Fits to kangaroo pouches of a lot of plate carriers and also features front facing Velcro.

If your ARCTURUS AK uses the MOE-style pistol grip and your base plate has gone walkies, here is the perfect replacement. The Pistol Grip Base Plate for AK-47/74 AEG is only compatible with ARCTURUS AKs which use the MOE-style pistol grip, as seen in the following example: ARCTURUS AK TWS AEG. The base plate is constructed from high density polymer, just like the original.

A Hook & Loop backed PVC Rubber Patch for Medics to make themselves known, whether for Airsoft gameplay or personal use. This Patch will attach to Chest Rigs, Backpacks, Hats, or anywhere with a free space of Hook & Loop panel available.

If you've lost a selector switch for your Thompson AEG, or even both, CYMA have you covered! The Selectors Set for CM.033/051 are packaged as a pair and are compatible with CYMA's Thompson AEGs, both the M1A1 and M1928 Chicago Typewriter variants. The selectors are constructed from alloy and finished in matt black.

If you take true pride in your choice of platform, why not show off what you're running at all times? This patch shows a black M16A3 with a raised 3D effect on a grey background, "M16A3" written in bold text below.

If you take true pride in your choice of platform, why not show off what you're running at all times? This patch shows a black M200 with a raised 3D effect on a grey background, "M200" written in bold text below.

If you take true pride in your choice of platform, why not show off what you're running at all times? This patch shows a black M870 with a raised 3D effect on a grey background, "M870" written in bold text below.

If you're running a Delta Armory DA-P series EU17 GBB pistol and want to reload faster, this is the key! The Delta Armory Extended Magazine Catch for P-Series GBB is constructed from high density polymer, designed specifically for the DA-P series but potentially compatible with other Gen.3 style EU17 frames (no guarantees though!).

This extended magazine release features a textured surface for optimal grip in all weather and is much wider than the standard mag release, making it easier to reach for smaller hands. The set includes the entire mag release assembly other than the spring, though the original mag release spring used in the DA-P series is a perfect fit. A super affordable upgrade to make pistol handling much easier, this Extended Magazine Catch is just what you need to speed up your reloads!

If you want to style up your M4/AR-15 AEG, the Specna Arms Pistol grip for M4/AR-15 AEGs is an affordable way to get that custom touch. These grips are designed for M4/AR-15 AEG rifles, and while the installation is a relatively simple job, we recommend consulting a tech if this is your first time, as motor height will need readjustment after installation.

This pistol grip replicates the real steel "A2" finger-ridged pistol grip commonly found on military issue M4, M16 and MK18 rifles. So, if you're going for a military-style build, this is the grip for you!

If you need a pouch for your everyday necessities look no further! The Novritsch Tactical Storage Pouch is the perfect pouch for any situation, both Airsoft and everyday scenarios. It is constructed from PVC, and is water resistant, only allowing in water through the zip. The zip features a glove-friendly tab so you can access the pouch on the battlefield with minimal hassle.

Both sizes can fit things like magazines or speedloaders. They are also ideal for paperwork, passports, and toiletries, a great pouch to carry whilst travelling. The large pouch measures 33cm x 22cm whereas the small pouch measures 23cm x 15cm.

If you need a multipurpose pouch for on and off the battlefield, the Novritsch Tactical Storage Pouch has you covered, keep your gear secure, whether its Airsoft or not!

A replacement flash hider for any Airsoft weapon with a 14mm counter-clockwise thread. It's designed to replicate the original iconic AKM flash hider.

A set of improved G-Series pistol magazine base plates designed to fit Tokyo Marui Magazines, made from TPU rubber to absorb impacts!

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts.