Valentines Day 2021: Cool bits under £50

Had a little mishap when taking your B9 GBB apart? KJW have just the thing. The B9 series GBB magazine catch is an original replacement part, and fits both the KJ Works B9 GBB series and the LS B9 GBB series. The set includes the magazine release and its spring.

Though it is designed by KJW for their B9 GBB series this mag catch may be compatible with other B9 GBBs but we aren't able to test this so please consider carefully before buying.

The Hi-capa people have their CNC machined magazine baseplates, when do the EU series fans get theirs? Finally, thanks to CowCow Technologies, users of the EU series of GBB handguns can now run aluminium magazine baseplates, making magazines easier to pull from pouches and adding a touch of flair too! The Tactical Aluminium Magazine Baseplate is machined from 6061 aluminium and is finished in a beautiful matt anodising in one of 4 eye-catching colour options!

If you struggle to get your SRS magazines out of your mag pouches quickly, this should help! The Hades Airsoft Magazine Base for SRS Sniper Rifles mounts to the bottom of your Silverback SRS Sniper Rifle magazine and provides extra purchase for easier handling. Faster reloads mean more chances to bag that kill! 

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The LCT AK Fire Selector is constructed from stamped steel and is a modernised design with a ledge that can be used to select fire modes from a firing grip. With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger.

This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. It doesn't come with any fittings and is only the fire selector. A perfect item for any Tactical AK or custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use. Not to mention, it will give the iconic fire selector scratch mark on your receiver!

Please note this is only the selector and does not include the necessary fittings for installation.

Keep the weight of your bipod-equipped rifle down with this featherweight M-LOK mount from ARES. This mount enables you to add Atlas-style bipods to your M-LOK front end. The Atlas style of bipod mounts using a large cylindrical lug and is often seen on L96s and variants in British army service. 

If you need a replacement bolt handle for your CM.707 Sniper rifle you are in luck! This CYMA part is an original replacement, intended for the refurbishment of an old and worn out sniper rifle. The handle is constructed from steel and does not include the polymer end piece so you will need the original end piece from your rifle to complete it.

A set of four Rubber-constructed Rail Covers for G&G SR Series KeyMod Handguards. If you own a G&G SR Series AEG and you want a comfortable hand-hold which provides good grip even when wearing gloves, you need a set of Rail Covers. This set is designed for the G&G SR Series; it may fit other KeyMod Handguards but it is designed for and fits best on the G&G Armament SR Series Airsoft Electric Guns. To install to a Handguard, simply push the slots into the desired KeyMod slot and then push the Rail Cover forwards to 'lock' it in place.

The Hades Airsoft Rail mounted VSR-10 Magazine pouch is a radical new idea for the VSR platform, taking the principles of the "Ready Mag" system for M4/AR15s and applying to the VSR-10 Sniper rifle. This magazine pouch is constructed from 3D printed polymer with steel screws and bolts and is designed to mount to a 20mm Picatinny rail on your VSR or clone VSR rifle. Having a spare magazine on your rifle means you can reload much more quickly in an emergency, and allows you to carry another mag without making room in your kit. This pouch would be great for the ultra mobile Airsoft snipers out there, as you can probably carry enough ammo on your gun for one game without the need for a rig!

If you are building a custom Hi-capa, the Laylax NINEBALL Custom Magazine Catch would be perfect to add a hint of style and some useful functionality at the same time. This magazine catch is an extended catch which places the button closer to the thumb, making for faster reloads and easier use for those with smaller hands. The catch is constructed from aluminium and has a textured surface to promote positive grip and control in all weather conditions. If your aim is to build the ultimate Hi-capa this would be perfect!

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a lightweight alloy, which makes it strong and bump-resistant but doesn't add lots of extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This Hand stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

The Novritsch Angled Hand Stop is a great choice for those Airsofters who find it hard to judge the length of their rifle or want to quickly find their correct shooting position in the heat of the battle.

A replacement ergonomic grip for AK Platform Series AEGs, giving you a comfortable and larger surface area to hold onto, giving you better control over your Airsoft weapons.

If you have dropped a GBB pistol magazine before, you will know the pain of a small but costly mistake ruining your magazine. The Enhanced Pistol Shockplate from PTS Syndicate is designed to prevent this; with a combination of high-density polymer and impact-resistant hard rubber in its construction your magazine has never stood a better chance of surviving a drop than it will with one of these installed!

If you need to get on target quickly in low light a light-enhancing front sight can make all the difference! The CowCow T1 Fibre Optic Front Sight can be set up with either a red or green genuine fibre optic insert and is finished in black but with a polished silver upper surface to help the insert gather more light.

This sight replaces the front sight on TM based HI-capa GBB pistols, and make no mistake, this being a genuine fibre optic insert, it glows like the sun! This is a massive improvement over the light enhancing acrylic rods used in sights provided with some budget Hi-capa pistols, and is easily as visible as a red dot sight in almost any ambient lighting conditions!

If you're seeking a way to style up your PTS EPM-AR9 magazines, these will do the trick! The PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack are constructed from the same rock-solid Dupont Zytel Polymer as the originals but finished in red, adding a touch of contrast to your setup to make it really pop.

Like the original black baseplates, the red versions have a dot matrix on each, ideally suited to marking your magazines, either numerically or to identify which mag is yours. The set also includes 3 mounting screws which is great news for those who've lost one. If you're an aggressive skirmisher who values style over concealment, the PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack in spicy red will suit your needs perfectly!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

A replacement grip for AK platform series GBB rifles, giving you a larger surface area to hold onto and better weapons handling.

If you've damaged the stock of your CYMA CM.103 AK Alfa, here's what you need to fix it! The CYMA Stock for CM.103 AK Alfa AEG is a replacement original parts set for the CYMA Platinum CM.103, a complete stock setup identical to the one pre-installed on the AK Alfa. This stock boasts 6 length of pull adjustment positions, 4 cheek riser positions and side folding functionality but is only compatible with the CYMA Platinum CM.103 AK Alfa AEG. 

An original replacement for the handguard of an LCT branded LCKM, which is made with Real Wood and Steel, and comes included with the Gas Tube. The part is easy to install, and is made to the same specification as the original part. This is the ideal purchase to replace your LCT LCKM handguard or convert another AKM series model.

A Tactical Soft Shell Jacket from Highlander, designed to provide you with the ultimate form of environmental element protection. Featuring multi-purpose pockets and a highly breathable AB-TEX shell this Jacket is a must have for the Stylish Operator!

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

This stupendously massive and imposing Suppressor is designed for AK replicas with a 24mm CW Thread, and is crafted from Aluminium 6061 and Steel to the usual high standard that LCT pride themselves on. Also featuring a spring-loaded Inner Barrel Extension, this is the Suppressor for you if you want to stand out anywhere.

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!