Full Metal Airsoft Guns

Whether you are looking for a cheap route into historical reenactment or a sniper rifle with more classic styling, the S&T M1903A3 Springfield ABS Stock Version was made with you in mind. This spring-powered bolt action rifle replica boasts full metal construction, VSR-10-based internals and a lightweight faux wood ABS polymer stock, reducing weight and allowing you to use this Springfield as you would a VSR-10; with no guilt about getting it dirty and dinged up.

For those who must have an optic, a scope mount is available, and those who need upgrades will be happy to learn that almost any part you would need to upgrade on the Springfield is compatible with VSR-10 parts. As it comes, we are treated to a 6.03mm tightbore measuring an epic 518mm in overall length, giving the Springfield an accuracy edge straight out of the box. As an alternative to the VSR-10 for a sniper rifle build or shell ejecting rifles for reenactment, the S&T Springfield ABS stock version perfectly marries the classic look with skirmishable practicality!

This rifle is large and in charge! The Specna Arms SA-B16 ONE™ Mk 12 MOD.1 AEG; Kestrel Basic ETU is a big Airsoft rifle based on the Navy's real steel MK 12 MOD.1 Special Purpose Rifle. This rifle is ready for both assault rifle and DMR duties straight out of the box. The Kestrel Basic MOSFET offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Inside the Specna Arms SA-B16 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you're a fan of the real steel firearm scene and love tactical platforms, you must be well aware of the Noveske N4! This Airsoft replica boasts full metal construction and a plethora of pre-upgraded parts from CYMA Platinum, the N4 hits the enemy team where it hurts, with an astonishing trigger response and rate of fire thanks to its E-Edition high-speed internals and MOSFET combination.

To get your rounds out there accurately and consistently, a 6.03mm tightbore inner barrel is installed, coupled with an alloy rotary HOP-up unit for impressive long-range performance, especially for such a compact platform. This 10.5" rifle, is the perfect length for any Airsoft scenario with a performance that can challenge anything else on the skirmish site.

Being an EMG-licenced replica, the N4 Shorty is adorned with flawlessly engraved and laser-engraved Noveske trademarks, making it genuinely hard to tell apart from the real thing. If you want one of the most realistic-looking platforms available on the market, you don't want to miss the EMG Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle; Kestrel Basic ETU!

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

If you have a Hi-Capa-shaped hole in your soul but demand realism, the EMG R613 STACCATO 2011 Hi-Capa XL GBB is what you need to fill it. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 XL, complete with licenced trademarks across the design in engraved, laser engraved and embossed form.

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO XL is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with high-end styling which doesn't look like everyone else's, the R613 STACCATO 2011 Hi-Capa XL GBB from EMG will be an asset to your loadout!

If you're wanting some serious carnage, that is sure to put a big grin on your face, this grenade launcher should be right up you're alley.

With it's standalone design featured in such iconic films as the John Wick series, it takes 40mm MOSCART allowing you to shower your targets in a wall of BBs.

Featuring an alloy barrel and high density body, it comes complete with a foldable stock, removable foregrip. Time to cause some havoc!

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

Forget what you know about the AR36 platform, this 1990s space gun has been revamped for 21st century warfare thanks to Novritsch! The SSR63 A2 is Novritsch's reimagining of the AR36K platform, boasting the same advanced ergonomics as the original platform with a new CNC machined aluminium M-LOK/20mm Picatinny hybrid handguard and 20mm top rail, providing extra strength when compared to the original configuration and keeping things in line with other cutting edge platforms.

On the inside, the SSR63 A2 is equally impressive, boasting a high torque 24K RPM motor combined with a programmable ETU/MOSFET which offers binary trigger, burst mode, pre-cocking and several other less exciting but equally impressive and essential functions to ensure smooth running reliability in the long term. The HOP-up unit is CNC machined for extra precision and a flawless air seal and the HOP-up bucking is provided by Maple Leaf and has a flat contact surface to enhance accuracy and range. This combination of fantastic pre-upgraded internals and a forward-thinking external redesign make the SSR63 one to watch on the skirmish field!

If you specialise in sniping and seek every possible performance advantage, the Novritsch SSG10 A1 Sniper Rifle; Full Thrust Version will definitely impress you! This rifle is pre-built by our workshop team using the Novritsch SSG10 A1 paired with the Full Thrust kit, chambered in 6.44mm Full Thrust BBs and supplied with a Full Thrust magazine, Full Thrust speed loader and a bottle of 0.62g BBs. 

The advantages of the Full Thrust setup compared to standard sniper rifles are significant, including longer range, flatter trajectory, improved accuracy and less chance of injuring your target despite improved energy retention. One might expect proprietary BBs to be a drawback, though Novritsch's Full Thrust 0.58g and 0.62g BBs are barely more expensive than the average 0.46g BIO BBs. 

When built up and put to the test, we found the Full Thrust Version of the SSG10 A1 to be positively exceptional, reaching out far further than the standard with greater accuracy and hitting with authority, even at extreme ranges. If you're a sniper at the cutting edge, keen to put the latest Airsoft technology to the test against your own custom builds, the SSG10 Full Thrust Version will blow your mind!

If you are looking for a cheap yet decent holster filler, Golden Eagle has something you'll like! The G.E Hi-capa 4.3 is a full metal clone of the Tokyo Marui, meaning 100% compatibility with aftermarket upgrades and the intense recoil and realistic feel of full metal straight out of the box.

Though it is based on the Tokyo Marui 4.3, the Golden Eagle Hi-capa has a 6.02mm tightbore inner barrel, adding to its accuracy potential, improving gas efficiency and raising FPS slightly. Golden Eagle also saw fit to add an 11mm CW female threaded outer barrel, meaning you don't need a new outer barrel to fit a tracer or suppressor, just an 11mm CW to 14mm CCW adapter. Unlike many other cheap GBB pistols, the Golden Eagle Hi-capa feels buttery smooth when cycling and is remarkably consistent, pointing to well-made internals and tight tolerances.

Whether its fate is to be your trusty sidearm, ready for close encounters, or it is destined to be built up into a Speedsoft monster, bristling with upgrades, the Golden Eagle Hi-capa will serve you well!

Do you feel lucky punk? I imagine you will with one of these in your hands! Great for skirmishing and target practice alike this CO2 powered Airsoft revolver is instantly recognisable, and infinitely well favoured by fans. With real revolver style functionality and a suave full metal alloy construction, you can be the talk of the town brandishing this old-school classic.

Kicking out a strong 300fps and holds up to 29 rounds per magazine. The pistol comes with one magazine and an in depth user manual showing you how to look after and dismantle the pistol.

Do you feel lucky punk? I imagine you will with one of these in your hands! Great for skirmishing and target practice alike this CO2 powered Airsoft revolver is instantly recognisable, and infinitely well favoured by fans. With real revolver style functionality and a suave full metal alloy construction, you can be the talk of the town brandishing this old-school classic.

If you move quickly with your sidearm out and want to look good while doing it, the VORSK EU18 Gold Match Vented Slide is what you're looking for. This EU series GBB pistol boasts a full complement of external upgrades in the form of a weight-reduced slide, spiral fluted outer barrel, raised light-enhancing iron sights and a flared magazine well. This combination gives the Gold Match Vented Slide a look all of its own, matching high end real steel race guns with its out-of-the-box customised look.

On the inside, VORSK has even treated the EU18 Gold Match Vented Slide with a 6.03mm tightbore inner barrel, giving it one more advantage over rivals in its price range. For a full metal GBB with a threaded barrel, thread adapter, customised looks and optics-ready slide we are genuinely surprised with how affordable the EU18 Gold Match Vented Slide is. It's not made of real gold, but how could it be for this price?

A fully automatic gas blowback pistol (GBB / GBBp) based on the Generation 3 (Gen.3) EU-Series Pistol, which has both single shot and full auto capabilities.

An excellent performing pistol that can run on both Gas and CO2 WE Europe Hi-Capa magazines.

If you're looking for a full metal DMR-ready AEG with slick styling, the CYMA Platinum CM.097 M4/AR-15 AEG; Kestrel Basic ETU is a fine choice! It's part of the newly revamped CYMA Platinum line and boasts the same reinforced high-speed internals as the original, except now it's even better with the EShooter Kestrel Basic MOSFET added to the mix!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. It keeps your gearbox cycling at maximum efficiency and with pre-cocking set, you can achieve an incredibly snappy trigger response perfect for rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

Even better than the original when it comes to downrange effect while maintaining the superb external quality CYMA Platinum is known for, the CM.097 is a fantastic intermediate option with sleek modern styling and plenty of pre-upgraded parts. If you're ready to take your rifling skills to the next level, the CYMA Platinum CM.097 M4/AR-15 AEG; Kestrel Basic ETU is calling your name!

Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

If you've grown tired of boring black pistols and you want to spice up the collection, the VORSK EU17 Solid Slide Metallic Edition will do just that. Based on the original VORSK EU17 Solid Slide, an already impressive full metal GBB pistol bristling with external upgrades, the Metallic Edition adds a dazzling metallic finish to the slide, thread adapter, magazine well flare and controls. Make no mistake, this pistol pops, even before the trigger is pulled!

Inside the Metallic Edition, we are treated to the same pre-upgrades as the standard EU17 Solid slide, including a 6.03mm tightbore inner barrel and steel slide lock, giving you the edge in accuracy and reinforcing an important high-wear part straight out of the box. Whether this is your first sidearm or another for the collection, the EU17 Solid Slide Metallic Edition will be an asset thanks to its blend of proven EU series internals and exciting, unique externals!

If you've grown tired of boring black pistols and you want to spice up the collection, the VORSK EU17 Solid Slide Metallic Edition will do just that. Based on the original VORSK EU17 Solid Slide, an already impressive full metal GBB pistol bristling with external upgrades, the Metallic Edition adds a dazzling metallic finish to the slide, thread adapter, magazine well flare and controls. Make no mistake, this pistol pops, even before the trigger is pulled!

Inside the Metallic Edition, we are treated to the same pre-upgrades as the standard EU17 Solid slide, including a 6.03mm tightbore inner barrel and steel slide lock, giving you the edge in accuracy and reinforcing an important high-wear part straight out of the box. Whether this is your first sidearm or another for the collection, the EU17 Solid Slide Metallic Edition will be an asset thanks to its blend of proven EU series internals and exciting, unique externals!

A Gas Blowback Airsoft Pistol from NUPROL, this EU-Series RAVEN series EU17 is a semi automatic pistol which runs on green gas for added realism by simulating recoil by adding kick to each shot. The pistol is highly customisable and supports a wide range of aftermarket attachments and upgrades allowing you to make the pistol truly your own.

This variant is the "BDS" model, fitted with a slide-mounted red dot sight straight out of the box, improving target acquisition speed and giving this militant platform an elite look. 

If you love the comfort, reliability and compatibility of the EU-Series pistols, and want something that will stand out from the crowd, then the EU17 is a sure choice. This pistol is one of the most cost-effective sidearms you can run in Airsoft!

If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3A1 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3A1 was the US Army's solution to the need for accelerated SMG production during the Second World War.

The Snow Wolf M3A1 is patterned after the original M3A1 Grease Gun, the second Grease Gun variant which saw the ratchet style charging handle deleted. In Airsoft terms, this means the Snow Wolf M3A1 is realistically limited to full automatic only, with the dust cover functioning as a safety catch, just like the real thing. The Snow Wolf M3A1 has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!

This Airsoft electric replica of the world renowned Dragunov SVD, has a tough, full metal construction, and is true to life in that it is is semi-automatic only with a low cap mag, included in the box.

Now you can really feel like an old-school Russian sniper, with this variant sporting a tactical black look.

If you're looking for a replica, that is no frills, sturdy construction and easy to use, this Dragunov lets you pick off targets at range; Great for beginners and seasoned players alike wanting to get into skirmishing with a Russian loadout. 

If you're an unconventional Airsofter who loves to break the mould, the Golden Eagle AT8890 M870 "Purge" Gas Shotgun should make you smile! This menacing build boasts full metal construction, a meaty breaching stand-off muzzle device/choke up front, a CNC aluminium M-LOK handguard and a real wood sawn-off pistol grip. Based on the TM M870 internal design and fuelled via Green Gas, the M870 "Purge" offers 3 or 6 BBs per shot just like the TM, but make no mistake, this ain't your grandaddy's shotgun. A quick glance at its exterior makes that clear!

Things start to get rather interesting when you add the included chainsaw grip and M4 AEG magazine adapter to the M870 "Purge", giving it considerably more capacity than other shotguns and a style all of its own. This means no more fumbling with shotgun shells every 10 shots, simply slap a new M4 mag in if you ever get to the bottom of the included 300-round high-cap. The chainsaw grip is unconventional but allows the "Purge" to be racked very, very quickly, great for clearing rooms with a "victory through superior firepower" mindset. The result is the uncontested king of hip-fire shotguns, ready to lay waste to your CQB foes in an indiscriminate manner!

A platform that will definitely turn heads in the safe zone and make the enemy flee in-game, the M870 "Purge" is practically peerless in its role and makes the perfect finishing touch to a post-apocalypse or Juggernaut loadout. If you play by your own rules and aren't afraid to try something new, the Golden Eagle AT8890 M870 "Purge" Gas Shotgun is the exciting primary you need!

Do you have the need to feel thunderous recoil? Nothing will do it quite like a Gas Blowback rifle! The WE G39C gas blowback rifle operates just like the real thing, with a fully moving bolt carrier which cycles back violently with each shot. The G39C boasts full metal construction despite being made predominantly from high-density polymer and can be field stripped in seconds just like the real rifle.

GBBRs aren't for the faint of heart as this rifle feeds from 30rnd real capacity magazines and needs to be operated like a real rifle; requiring cocking to load the first round. When the mag runs dry, the bolt will lock back which is your cue to reload and hit the bolt release catch inside the trigger guard. No AEG can match the realism provided by a GBBR, and with its reputation for great performance and impressive cool-down resistance, the WE G39C is the perfect tool for the experienced Airsofter who likes a challenge. Consider this a GBB pistol on steroids!

Those with a taste for the classics and a desire for superb performance straight out of the box; the Novritsch SSR63 A1 is calling your name. This Novritsch AEG is based on the AR36K in its external styling, closely matching the original AR36 rifle issued to UK Armed Police, the German, Spanish, Saudi and Mexican armed forces with a few choice enhancements to elevate it over other AR36 AEGs. On the outside, the SSR63 A1 ticks all the boxes, with fully ambidextrous controls, flawless ergonomics and rock-solid high-density polymer furniture which is both strong and feels fantastic.

On the inside is where things get really interesting! The SSR63 A1 boasts a high torque 24K RPM motor combined with a programmable ETU/MOSFET which offers binary trigger, burst mode, pre-cocking and several other less exciting but equally impressive and essential functions to ensure smooth running reliability in the long-term. The HOP-up unit is CNC machined for extra precision and a flawless air seal and the HOP-up bucking is provided by Maple Leaf and has a flat contact surface to enhance accuracy and range. If you are bored with your M4 and want something a little different that has more than enough performance to contend with the best, the SSR63 A1 is what you need!

If you're into modern Russian platforms and value realism, the ARCTURUS AK-12K AEG Rifle; Optical MOSFET will definitely put a smile on your face. Like other ARCTURUS AK platforms, this beast is made almost entirely from steel, with a stamped steel receiver and top cover, steel outer barrel and milled steel front sight block, giving you the authentic heft a proper AK replica needs. While the externals are absolutely bomb-proof and finished flawlessly, the internals of the AK-12K Optical MOSFET version are equally impressive!

Inside, you'll find a 6.03mm tightbore inner barrel paired with the ARCTURUS AK rotary HOP-up unit, giving you what you need to send BBs downrange accurately and consistently. The gearbox is a version 3 fitted with CNC 18:1 steel gears running on 8mm ball bearing bushings with a new nozzle made from CNC machined technopolymer, promising enhanced airseal qualities and reliable feeding in the long term. 

Star of the show is the ARCTURUS Optical MOSFET, providing the ultra-realistic 2-round burst mode just like the real AK-12 along with the ability to program the fire controls for burst modes of different durations, adjust pre-cocking and trigger sensitivity. The MOSFET also improves electrical efficiency which translates into a faster trigger response and raised rate of fire, especially when paired with the pre-installed 23K RPM high torque motor. If you're searching for an ultra-modern AK replica which is built like a tank and extremely well-equipped straight out of the box, the ARCTURUS AK-12K AEG Rifle; Optical MOSFET is one to watch!