The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR.

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!

A medium capacity (mid-cap) magazine designed for use with Airsoft 6mm Electric Guns (AEG). The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The BB guide of the magazine is coloured bright orange, allowing you to see the amount of rounds remaining, from the top, side and lower part of the magazine, allowing you to pick up the mag and letting you know exactly how many rounds are remaining.

If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (GeneralPurpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point.

The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!

The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

These EPM/EPM1/EPM1-S Orange Followers can revive your old, worn down PTS EPM magazines, making them shoot like brand new. Made from a strong polymer, these followers are designed to improve BB feeding speed and consistency. This follower keeps the pressure of the spring concentrated in line with the BB stack and doesn't add any pressure sideways against the walls of the magazine BB channel. The design also prevents BBs from sliding past the follower and jamming the gun! The followers come in a pack of three meaning that you can repair three of your favourite EPM/EPM!/EPM1-S magazines.

Show your loyal mags a bit of love and have them shooting like brand new with a 3 pack of EPM/EPM1/EPM1-S Orange Followers!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a flashlight and laser on a compact primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will make your setup more intuitive to run than ever before! Designed to take up as little rail space as possible while providing functionality similar to the Unity TAPS switch, the AXON is about as small as dual switches get, measuring approximately 7cm end to end. The integrated mount fits 20mm Picatinny rails but an M-LOK adapter plate is included, allowing you to fit the AXON to M-LOK slots.

The set includes a silver 2.5mm plug, a gold 2.5mm plug, a Crane plug and a SureFire plug, all of which are compatible with other plugs in the PTS Unity ecosystem. Each button on the AXON switch can be operated in both momentary-on and constant-on modes. For the angled switch, a half-press activates constant-on and a full press activates momentary-on. With the flat switch, a single press provides constant-on, and a double tap provides momentary on.

Designed with ergonomics in mind, the AXON can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. If you're sick of the struggle of running multiple pressure switches and seek a more professional looking primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will give you what you need!

If you want a more aggressive look for your PTS Sandman suppressor, the PTS Syndicate Dead Air R-Series Flash Hider Front Cap for Sandman Suppressors will give you what you need. This front cap replaces the original cap on any of PTS's Dead Air Sandman suppressors with a fantastic replica of the real steel Dead Air Flash Hider Front Cap. In real steel terms, this reduces muzzle flash signature but in Airsoft terms, it's only for the look!

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your Tokyo Marui EU17 GBB pistol. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you're refurbishing an old helmet or need to replace some ageing padding, PTS has your back! The Comfort Pads for PTS MTEK FLUX Helmet mount to the internal Velcro inside FLUX and other helmets, allowing you to get the perfect fit on your noggin thanks to their modular design.

While designed specifically for the PTS MTEK FLUX Helmet, these pads should fit most other helmets with removable padding and internal Velcro, making them a great upgrade for extra comfort. Whether you seek replacement padding for hygiene reasons or your helmet slides around on your head as you run, the PTS Syndicate Comfort Pads for PTS MTEK FLUX Helmet are ideal!

If you're a fan of modern shooting techniques and rock around with an M4, AR-15 or SCAR-L, this magazine is just for you! The PTS Syndicate EPM 150rnd Mid-Cap Magazine w/ MultiTasker® Mag Pod Base Plate is perfect for realism seekers as the base plate included is designed for real steel magazines but they are also compatible with Airsoft magazines.

The BB guide of the magazine is coloured bright orange, allowing you to see the number of BBs remaining, from the top, side and lower part of the magazine. You can pick up the mag and know exactly how many BBs are remaining. It is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight.

If you're running a laser or flashlight with a 2.5mm jack, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will make your setup that bit slicker! Designed to mount to 20mm Picatinny rails and take up as little space as possible, the AXON-SL is perfect for compact platforms with little rail space to spare, measuring a mere 4cm end to end.

The set includes a silver 2.5mm plug and a gold 2.5mm plug, both of which are compatible with other plugs in the PTS Unity ecosystem. The switch itself is a single-button switch but can be operated in both momentary-on and constant-on modes. Simply half-press the switch for momentary-on and give it a full click for constant-on.

Designed with ergonomics in mind, the AXON-SL can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. Whether you want to give your primary the elite touch with a high-end, licensed pressure switch or you're fed up with standard switches dangling, getting snagged and failing when you need them, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will serve you well!

If you're running a laser or flashlight with a 2.5mm jack, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will make your setup that bit slicker! Designed to mount to 20mm Picatinny rails and take up as little space as possible, the AXON-SL is perfect for compact platforms with little rail space to spare, measuring a mere 4cm end to end.

The set includes a silver 2.5mm plug and a gold 2.5mm plug, both of which are compatible with other plugs in the PTS Unity ecosystem. The switch itself is a single-button switch but can be operated in both momentary-on and constant-on modes. Simply half-press the switch for momentary-on and give it a full click for constant-on.

Designed with ergonomics in mind, the AXON-SL can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. Whether you want to give your primary the elite touch with a high-end, licensed pressure switch or you're fed up with standard switches dangling, getting snagged and failing when you need them, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will serve you well!

If you're running a laser and flashlight on your primary, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular will make using these devices that bit easier! Designed to provide a single control location for both your flashlight and laser, the TAPS can be installed wherever you need it on any 20mm Picatinny, M-LOK or KeyMod rail system via its innovative modular mount. Forget using Velcro or zip-ties to keep your tatty pressure switches on board, the TAPS will keep your primary neat and furnish it with the high-end Unity Tactical look!

The innovation doesn't end with the mount either! Unlike comparable clones, the TAPS offers a modular plug system providing broad compatibility with the most common lights and lasers out there. Included in the set is a SureFire plug, an Insight plug, a silver plug for 3.5mm jacks and a gold plug for 3.5mm jacks, which can be used in whatever configuration suits the user.

Putting control of your light and laser literally beneath your fingertips, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular is not only user-friendly but also boasts official licensing from Unity Tactical, completing the elite look with licensed trademarks. If you're working on a build which needs the high-end look, the TAPS belongs on your gat!

If you're running a laser and flashlight on your primary, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular will make using these devices that bit easier! Designed to provide a single control location for both your flashlight and laser, the TAPS can be installed wherever you need it on any 20mm Picatinny, M-LOK or KeyMod rail system via its innovative modular mount. Forget using Velcro or zip-ties to keep your tatty pressure switches on board, the TAPS will keep your primary neat and furnish it with the high-end Unity Tactical look!

The innovation doesn't end with the mount either! Unlike comparable clones, the TAPS offers a modular plug system providing broad compatibility with the most common lights and lasers out there. Included in the set is a SureFire plug, an Insight plug, a silver plug for 3.5mm jacks and a gold plug for 3.5mm jacks, which can be used in whatever configuration suits the user.

Putting control of your light and laser literally beneath your fingertips, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular is not only user-friendly but also boasts official licensing from Unity Tactical, completing the elite look with licensed trademarks. If you're working on a build which needs the high-end look, the TAPS belongs on your gat!

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!