Refine results
Refine by
Viewing 30 of 89.
  • Rubber Inlay
  • Compact Grip
  • For M-LOK Rails

A short and stylish foregrip for M-LOK rail systems with a rubberised inlay, which will give you a sturdy and comfortable platform to brace your rifle and improve your stability when shooting.

  • For EOTech
  • Transparent
  • Protect Sights

A transparent Polymer lens protector designed for EOTech Style Sights, protecting your Sight from BB's and other projectiles designed as a first defence, protecting your lens.

  • SMG-5/Uzi
  • Pack of Three
  • Rubber Construction

A set of three Magazine Pulls/Assists for Submachine Gun-sized Magazines, such as the SMG-5 and UZI. These Rubber Assists slide over the bottom of the Magazine and provide a solid loop that makes them easy to rip Magazines in and out of pouches in a flash. This is the perfect way to add a nice aesthetic touch to your replica, and make it miles easier to handle, whilst also hopefully improving your reload times.

  • High Mount
  • A Single Mount
  • Additional Rails

A single raised scope mount ring, designed to securely hold an optical sight in place, while mounting onto a 20mm RIS / RAS rails on Airsoft and Air Rifles. 

  • Pack of 4 Panels
  • Textured Rubber
  • 15cm Length Panel

A four pack of Keymod compatible Rail covers, designed to give the user a firmer grip on their Rifle during use. The rail panels are constructed from Rubber and are 15cm in length. 

  • Stippled
  • Low Profile
  • Small Compartment

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

  • M95 Spring
  • For standard AEG Gearboxes
  • Provides approximately 95 m/s (310FPS) with 0.2g BB

This M95 spring from Big Dragon fits any AEG gearbox which takes standard AEG springs. The spring is a non-linear design, reducing strain on the gearbox shell. Once installed, assuming the air seal of your gearbox is good, the spring should provide around 95 m/s or 310 FPS muzzle velocity on 0.2g BBs. This spring is ideal to drop the power of your gun to allow it to be used for CQB, or for a gearbox built from scratch. 

  • Adapter for crank wound speed loaders
  • For AR36 low and mid-cap magazines
  • Load your magazines up quickly and effortlessly

Are you always the last person to finish loading your mags? Are you sick and tired of seeing your mates' impatient looks as you frantically prepare yourself for battle? With a crank wound loader, you can load up a mid-cap in mere seconds, and spend your time more efficiently! This adapter allows you to load up AR36 AEG low and midcaps using a crank wound speed loader. The adapter locks into the M4/AR15 magazine interface in the loader and allows you to insert and load an AR36 Airsoft AEG mag!

  • 14mm CCW Thread
  • Accurate Trademarks
  • Foam Filled Suppressor

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

  • 14mm CCW Threads
  • Unique Zombie Hunter Logo
  • Can Be Used As Barrel Extension

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

  • Imposing Design
  • Steel Construction
  • 14mm CCW Thread

This Steel constructed Muzzle Brake is designed for Airsoft Guns with a 14mm CCW Thread, and is the perfect finishing touch to any Custom Build, or as a little bit of flavour to a stock Airsoft Replica. If you're looking for the perfect Muzzle Device for your Airsoft Gun, you've found it.

  • Flip-up front sight
  • KAC style for PDW/SR-25/M4
  • Steel adjustable sight blade

A classic front sight design that has been around for quite some time in the Airsoft world, this sight is usually found on KAC style replicas such as the KAC PDW, SR-25, and SR-15, but is perfectly suitable for a civilian tactical M4 build or an MK12 SPR build. The sight mounts to a 20mm Picatinny rail and is adjustable for elevation by raising and lowering the steel front blade/post using an M4/AR15 front sight adjustment tool. This sight is very sturdy and well built, making it perfect for anyone who has had bad luck with polymer sights. The sight was intended to be equally effective in use as a primary aiming device as it is as a backup sight for your optic. This sight is incredibly low profile when folded, and is perfect for setups with a big scope that would prevent bulkier flip-up sights from mounting. 

  • Lightweight Design
  • Finger Ridge Surface
  • AEG Compatible Replacement

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

  • CW & CCW Thread
  • Blackwater Logo
  • Foam Filled

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

  • Rubber Base Loop
  • Finger Ridge Surface
  • Stabilised Shooting Platform

A replacement pistol grip for M4, M16 and AR-15 Platform AEG Reciever and is designed to be a lightweight, sniper style grip with a moulded, ridged finger shape for grip and a rubberised bottom grip for stability.

  • BCM Style compensator
  • 7.62mm design
  • Fits any 14mm CCW male thread

If you are looking for something to give your primary that aggressive look, or you have a 7.62mm style rifle and you want a real-world appropriate compensator, we have a real treat for you here! Introducing the Steel Flash Hider from Big Dragon. This flash hider will attach to any 14mm CCW male thread and provides an extended compensator style look, covered with ports and finished in realistic gun metal grey. The design is based of the real world BCM compensator, designed to reduce recoil in 7.62 NATO rifles. If you ask us, this flash hider would look great on a SCAR-H replica, a tactical G3 replica or SR25, but lets face it, it would look great anywhere you put it!

  • VLTR style folding front sight for M4/AR15
  • Integral 20mm Picatinny rail
  • Replaces the triangular front sight post/gas block

For those who feel like if they replace their M4/AR15 front sight post they will miss it when it's gone, now you can have your cake and eat it too! The Folding Railed Front Sight / Gas Block from Big Dragon is designed to replace the original M4/AR15 triangular sight and provides a flip-up front sight with an adjustable sight blade which doubles as a 20mm Picatinny rail when flipped down. As a bonus, this front sight also includes a QD sling socket on either side which can be used with a rear sling point to attach a two-point rifle sling. 

  • 500 Lumens LED
  • 30mm Body Width
  • Uses CR123 Battery

A lightweight torch designed to be used in dark conditions to spot targets, cause distractions and temporarily blind your opponents.

  • Arm Brace "Stock"
  • Multiple Positions
  • Secures Around Forearm

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

  • Bronze or Black
  • For 20mm RIS / RAS
  • Silver Ironsight Trim

A set of Alloy constructed Folding / Flip Up Ironsights for 20mm RIS / RAS rails, available in either Bronze or Black with Silver Trim. Both the Front and Rear Sight Post are adjustable to account for Windage and Elevation, without the use of tools. Whether you run a primary optic or you want to depend on these ironsights alone, they will be the perfect finishing touches to any loadout you're currently building.

  • Flip Up / Down
  • Locking System
  • Fully Adjustable

    A helmet mount, designed to allow the user to fit Sights, such as Night Vision or Thermal Scopes to their FAST helmets or equivalent mount point. 

    • Flip Up Ironsights
    • Alloy Construction
    • For 20mm RIS/RAS

    A set of Flip-Up Ironsights for 20mm Rails, which are constructed from Alloy and feature a 'Battle Ring' type Ironsight setup. If you run an optic and need a backup for when your battery dies, or you just love the look of an Ironsight Set on top of your Rifle, this is just what you need.

    • Red/Green Dot
    • Super Compact
    • RIS Weaver Base

    A compact red/green sight that weighs in at an amazing 55g, making it perfect for speedsofters and snap shooters alike! 

    From £36.99

      A compact 40mm MOSCART grenade launcher. The perfect combination for any Airsofter looking to make a scene, clean up any CQB killhouse in style and leave a huge mess in the same trigger pull. 

      • Tool-less Fitting
      • Red / Green Dot
      • Adjustable Brightness

      A low profile and compact Red Dot Sight designed to be attached to the top of Airsoft Rifles and Guns to allow quick target acquisition during games. 

      • 2 MOA Dot
      • Includes low and high mounts
      • For 20mm Picatinny rails

      If you're looking for a compact red dot sight, but want something that looks a bit different to the norm, the Miniature Rifle reflex sight from Big Dragon could be what you need! The Miniature Rifle Reflex sports a crisp, fine 2 MOA dot with 6 levels of brightness adjustment for aiming, and comes with both a low and high mount for 20mm Picatinny rails. 

      • Four-Point RIS
      • Fits AEG & GBB
      • MK18 Handguard

      A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

      • Aluminium
      • PBS-4 Replica
      • 14mm CCW Thread

      A replica of the legendary PBS-4 Suppressor, lovingly recreated using Aluminium and with a 14mm CCW Thread, so that it can attach to more than just an AK! This Suppressor is designed for 5.45x39mm AKs (in the real world), but is an unusual design that can add a cool touch to any replica. If your Airsoft Gun has a 14mm CCW Thread, this Suppressor will fit and work, and is the ideal way to make your Gun stand out from the crowd.

      • Russian Flashlight
      • Ideal for Tactical AK Setup
      • Included 20mm Pressure Pad

      A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

      • Aluminium
      • For 20mm Rails
      • Offers Sling Loop

      An Aluminium constructed sling point for 20mm RIS rails, which allows you to install a sling at any location on your rail system.

      Tactical Accessories for your Airsoft Pistol, Rifle, and more!

      A range of tactical accessories and attachments for all of the most popular Rifles, Pistols, Submachine Guns, Sniper Rifles and more! If you're looking for that hard to find part, or the bit of tactical kit you never knew you needed, there is a good chance that Big Dragon produce it. All the parts are at a great price point for Airsoft Skirmishers, saving you from spending a fortune on Real Steel Kit.