Airsoft Mounts

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you're feeling that carry handle vibe and want an optic on top, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is what you need. Following the real steel trend of mounting modern optics to the old school AR carry handle, this mount is made from CNC-machined aluminium with the Aimpoint Micro mounting standard/footprint, making it compatible with most T1 and T2 clones, along with other optics with the same footprint.

This mount is compatible with practically any M4/M16 carry handle, including A1 and A2 fixed carry handles and M4A1/M16A4 removable carry handles. Please note, depending on which optic you choose, you may need to source longer screws to attach your optic to this mount to guarantee compatibility. If you're working on an old meets new build, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is an essential part!

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!

If you're running a compact platform with limited rail space or simply seek a sprinkle of "gucci" for your build, the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight is well-suited to the task! Made from precisely machined aluminium and patterned after an up-and-coming alternative to popular "Skiff" and "Hydra" mounts, the K High Rise Mount is phenomenally built and packs a lot of functionality into a relatively simple-looking mount!

The set includes what is known as a "Diving Board", a section of rail which attaches to the front of the optic mount, ideal for a PEQ or DBAL laser unit. This can be removed to reduce weight and improve field of view, revealing the minimalist skeletonised design of the mount itself. On each side, the K High Rise Mount features a single M-LOK attachment slot, allowing you to mount an M-LOK rail to each side (with the M-LOK nut removed) to add even more accessories, should the mission require it.

The K High Rise Mount is designed for 20mm Picatinny rails and is compatible with red dot sights using the Aimpoint Micro footprint/mounting standard, including most T1 and T2 clones. If your mates all run Hydras and Skiffs, take a walk on the wild side and make them jealous with the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight!

If you're modernising your A&K PKM and need an optical sight on board, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is the way to go. Made from flawlessly machined aluminium with realistic laser-engraved markings, this optic mount is designed specifically for the A&K PKM Machine Gun, offering a 19-slot 20mm Picatinny rail at 12 o'clock, ready for your choice of optical sight.

Styled after the real steel Zco B51 rail, this optics mount is significantly skeletonised, keeping weight to the bare minimum as the PKM is heavy enough by itself! Whether you're working on a modern Russian Armed Forces loadout or you run a PKM for its iconic looks, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is a game changer!

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! 

This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. 

To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you're always bending your neck awkwardly to look down sights, the Novritsch High Riser Mount for Red Dot Sights will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a steel mounting bolt to secure it to your Airsoft platform's rail.

Constructed from CNC machined aluminium with a steel mounting bolt, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the Novritsch High Riser Mount for Red Dot Sights is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Riser Mount for Red Dot Sights will let you get on target without straining your neck

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

If you're searching for a sling mounting solution for your M4/AR-15 AEG, the Delta Armory CQD Sling Plate for M4/AR-15 AEG is ideal. Constructed from steel for maximum strength, this CQD-style sling plate allows you to mount a single-point sling to either side of your sliding stock M4/AR-15 AEG, ideal for left or right-handed shooters. The plate can also be paired with a front sling point if you prefer a two-point sling. Compatibility-wise, this plate should fit any Marui-spec M4/AR-15 AEG with a sliding stock but won't work with fixed stocks or PDW stocks.

If you are rocking the Novritsch SSP5 GBB pistol that thing isn't complete without a red dot sight! The Novritsch Premium Red Dot Plate for SSP5 GBB pistol is designed specifically for the SSP5 series and is constructed from CNC machined aluminium with an anodised finish. This red dot plate uses the Docter red dot sight footprint and should fit any micro red dot sight with the Docter footprint, including the Novritsch Red Dot Sight Premium V3. If you want to take pure advantage of the borderline insane performance of the SSP5 at long range, this plate is the key!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to take pure advantage of the superb accuracy and range of the Novritsch SSX23 NBB pistol, the Novritsch SSX23 Red Dot Plate V2 is what you need! This red dot mount plate is constructed from CNC machined aluminium and designed to mount directly to the SSX23 slide, providing mounting holes for the Novritsch Red Dot Micro V2 and other red dot sights which use the Leupold DeltaPoint Pro® mounting standard/footprint. 

Adding a red dot sight can make all the difference, especially when installed on a long range beast like the SSX23. If you want to acquire your targets faster, aim intuitively in low-light conditions and make your SSX23 look amazing, the Novritsch SSX23 Red Dot Plate V2 gets you half way there!

If you're looking for a reliable sling mounting option for your M4/AR-15 AEG, the Specna Arms CQD Sling Plate for M4/AR-15 AEG is a perfect choice. Made from durable alloy for enhanced strength, this CQD-style sling plate enables you to attach a single-point sling to either side of your sliding stock M4/AR-15 AEG, making it suitable for both left- and right-handed users. It can also be used alongside a front sling mount if you prefer a two-point sling setup. In terms of compatibility, this plate is designed to fit most Marui-spec M4/AR-15 AEGs with sliding stocks, but it is not suitable for use with fixed or PDW-style stocks.

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST Riser should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users.

This riser is constructed from 6000 series aluminium, meaning it's highly durable whilst maintaining a minimal weight. It is also useful for elevating your optics above any upper-mounted tac light/laser modules, such as PEQ boxes. If you're seeking a riser and want something that is luxurious in every sense, the PTS Syndicate Unity Tactical FAST Riser is exactly that!

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

If you're running the super-speedy SSP28 GBB from Novritsch, here's how you get on target even faster! The Novritsch SSP28 Red Dot Plate can be mounted to place your red dot sight in a forward or rearward position, giving you the versatility to set your SSP28 up to suit your exact needs. The plate is made from CNC machined aluminium and includes the screws you'll need to mount it.

This mount plate is designed to fit Novritsch's Micro Red Dot V2 and Premium Micro Red Dot V3, but also fits any micro red dot sight with the DeltaPoint Pro® footprint/mounting standard. If you want to take full advantage of the SSP28's speed, add a red dot sight and you won't look back!

If you're looking for a robust M-LOK sling point, look no further than the Airsoft Artisan M-LOK Sling Mount! Made from steel for maximum strength, this sling point is capable of mounting both hook-style and standard strap slings. It mounts to M-LOK negative space attachment slots, ideally used as a front sling point.