Airsoft Electric Gun Magazines

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

The Novritsch 100rnd Magazine for P90/SSR90 Gen.2 AEGs is more transparent than other magazines allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! Novritsch has also slightly tweaked this magazine design so it fits better into P90/SSR90 Gen.2 AEGs, giving you smoother reloads even in the heat of the moment, when the adrenaline is pumping!

It is made from a strong polymer and sturdy steel feed spring, making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

If a bald New York cop just killed your brother, it's time to pull out the AUG! If you are making use of a fine Austrian inspired AEG rifle, you will probably need some magazines to keep up when skirmishing. These magazines are designed for the AUG Airsoft AEG series, including Jing Gong AU-1G and others based on the original Tokyo Marui design. This magazine is realistically designed, with ribs on the exterior surface to add strength and to provide exceptional grip. The magazine is filled through the fill window at the top of the magazine body and can be wound using the wheel on the baseplate. This mag is available in either solid black, or translucent brown, meaning whether you are doing a modern tactical AUG or an old-school classic AUG, these mags will suit!

A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.

A Three Pack of Medium Capacity Magazines designed exclusively for the Airsoft Krytac Kriss Vector AEG, created by KRYTAC and officially licensed by KRISS.

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you own an Evolution Reaper Carbontech AR-9 SMG AEG, this is for you! This Evolution 110rnd Mid-Cap Magazine sports high-density polymer construction and a steel feed spring, guaranteeing that it will keep up with your SMG's rapid rate of fire! Due to its proprietary design, it will only work effectively in Evolution Reaper Carbontech AR-9 SMG AEGs. It features an extended baseplate design to make it easier to pull from pouches when a fast reload is required, and so it's easier to remove from your SMG when the BBs hit zero!

A 6mm BB Airsoft 450 round high capacity magazine, designed to be used with Double Eagles M89A series of Airsoft Electric Guns.

If you have a Krytac P90 AEG why not feed it with the best magazines money can buy? The Krytac P90 magazine is loaded (pun intended) with features which make it just that bit better than standard P90 magazines. Featuring adjustable capacity, from a realistic 50 rounds for Milsims or 200 rounds for spraying and praying, and a stop firing on empty function, there is no better way to feed the latest and greatest P90 AEG out there!

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.

If you need mags for your SSR77, these are the ones! The Novritsch 180rnd Magazine for SSR77 AUG AEGs is constructed from translucent brown high density polymer with an olive green baseplate, just like real AUG mags. The mag holds 180 BBs loaded through the fill/feed port on the top using a speed loader or loading tool. 

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 180-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and is ideal for the super speedy Novritsch SSR77 range!

EMG has teamed up with Lancer Systems to bring you a fully trademarked and licensed 5.56x45mm style magazine to give your Airsoft M4 AEG some serious style points! The mag features an ultra-modern aesthetic with the following trademarks:

• '5.56x45mm'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid-cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from a translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible. As with other mid-cap mags, a speed loader or loading tool is required to load the mag and loading is carried out through the fill/feed port at the top of the magazine body. If you're working on a 5.56x45mm-themed build and need modern magazines, these are perfect!

The Fuxing 160rnd AUG Mid-Cap Magazine is constructed from a black high-density polymer, it also features the iconic AUG waffle texture on the sides of the magazine for better wet weather handling. The mag holds 160 BBs loaded through the fill/feed port on the top using a speed loader or loading tool.

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 160-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and provide you with enough ammo to send all your opponents back to the respawn point.

The Jing Gong 100rnd P90 Mid-Cap Magazine is transparent, allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! This magazine fits perfectly into the CM.060, giving you smooth reloads even in the heat of the battle when the adrenaline is pumping!

It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra-modern magazine, you'd be hard-pressed to find a better mag than this.

This magazine is a mid-cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high-density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and ease of loading. On either side of the mag, you can see a modern checked texture for the modern battlefield

If you require a spare magazine for your M249 AEG, this is for you! The  Novritsch 2000rnd Electric Box Magazine for M249 AEGs is designed for the Novritsch SSR249, however, it should be compatible with most other M249 AEGs on the market. The magazine is constructed from polymer with feed tubes coiled from steel wire and a black fabric cover. This magazine boasts both a sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding for you when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

If you have an ARCTURUS AK in your arsenal and need some spare magazines for the battlefield, look no further! The ARCTURUS 30/130 Adjustable Mid-Cap for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

The magazine's capacity can be adjusted from a real capacity of 30 to a more fitting capacity for Airsoft, of 130 rounds. To adjust it, remove the magazine from the shell, and there is a switch that can be moved, one side for 30 rounds and one side for 130 rounds.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

Looking for mags for your M14 battle rifle? Jing Gong has just what you need! The 400rnd High-capacity magazine is designed for Tokyo Marui style M14 AEG rifles such as the Jing Gong JG1401 and CYMA CM.032 but is not compatible with G&G M14 AEGs.

This mag holds an impressive 400 6mm BBs and is a wheel wound high-capacity design with a winding wheel located on the baseplate. The mag can be loaded through its fill window on the top rear of the magazine body which is easy to open by hand with the help of a fingernail. This magazine has a steel shell to give a realistic feel, and has reinforcement grooves in either side for that classic M14 cold war battle rifle look.

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

If you are the proud owner of the impressive King Arms PDW SBR, or you have another AEG that takes SMG-5 magazines, this great value pack of 5 magazines may be of interest to you. The set includes 5x 100rnd medium capacity magazines constructed from polymer with steel feed springs. The magazines can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. These mags are patterned after the standard steel SMG-5 magazines and would fit in with any SMG-5 loadout perfectly!

If you're loading up on magazines and like them modern, the Novritsch 140rnd Mid-Cap Magazine for M4/AR-15 AEGs is ideal! This spring-loaded mid-cap magazine holds 140 rounds and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

Constructed with a strong polymer shell and steel feed spring, this mag won't rattle as you run like a high-cap would and is very easy to handle in wet conditions compared to steel-shelled STANAG magazines. Compatibility-wise, this mag should fit and feed in most M4/AR-15 and SCAR-L AEGs and also works well with the Novritsch SSR63A2 AR36 AEG. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

If you love your speedy SSR9 DSG but don't love reloading every couple of minutes, the Classic Army 1400rnd Drum Magazine for Novritsch SSR9 AEGs belongs on your gat! This electrically powered auto-winding drum mag holds a positively epic 1400 BBs and winds up via the button on the front, saving you time winding high-caps and meaning you'll almost definitely never need to reload unless you have a seriously heavy trigger finger!

The Drum Magazine is powered by a 9V battery (smoke alarm style) which is installed through the compartment on the front of the magazine. If you don't have a 9V handy and don't want to raid your smoke alarms, you can grab one here. BBs are loaded through the fill window on the rear of the magazine; simply open the port and pour your BBs in. With this done, press the button on the front of the mag dead centre for a few seconds and the mag will wind up, ready for you to let rip!

Compatibility-wise, this magazine works with the Novritsch SSR9, SSR9 DSG and Classic Army X9 AEG series, made by Classic Army and supplied by Novritsch. The mag is made predominantly from high density polymer to avoid compromising your in-game agility and making your SMG unwieldy. If you know how quickly an SSR9 DSG dumps a mid-cap and you CBA practicing your fast reloads and investing in heaps of standard mags, the Classic Army 1400rnd Drum Magazine for Novritsch SSR9 AEGs is what you need!

If you want more BBs but don't want to weigh yourself down with an excessive amount of magazines, you need a high-cap magazine! The ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG holds more than enough BBs for multiple firefights out on the skirmish field and is based on the iconic NATO STANAG 30rnd mag with its stamped steel shell.

Like most other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, open the window, then pour your BBs in. With this done, use the winding wheel on the baseplate to tension the mag, and you're all set. If you need more capacity but don't want to compromise agility with a rig full of magazines, the ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG is what you need!

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.