Airsoft Electric Gun Magazines

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

A 6mm BB medium capacity magazine replica, based on the Bakelite-polymer Magazines of the AK74 series of weapons, designed for use with E&L Airsofts line of various replica AK74 AEGs. 

Looking to feed your AUG? This box of 4 magazines for a bargain price will have you well covered. Made from robust textured translucent polymer just like the real thing and featuring a whopping 170rd capacity, these AUG midcaps represent the best value for money for these unique mid-cap magazines. 

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

If you are rocking the EC-202 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine For EC-202 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

A Polymer magazine for the ARP9 Airsoft Electric Gun, which holds a total of 60rnds and feeds BBs into the gun via a spring, meaning they feed completely until empty. Not only this, but they have actual dummy rounds (not just stickers) inside to look just like the real deal.

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

A 300 Round High Capacity Magazine designed for the Cybergun Famas.

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

If you need magazines but you also want to add a more realistic look to your AUG the NUPROL W-Mag would be a great choice. This magazine holds 70 BBs and is loaded through its fill/feed port, located on the top of the magazine body, using an Airsoft speed loader.

This mag features a tiled type texture with lower dot pattern for a more modern magazine design to complete your AUG.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft AUG AEG.

If you are equipped with the WELL PRO WE06 PPK-20 Compact, whether it is the Standard or Advanced version, you will need a few of these to keep it well-fed! The WELL PRO 30/80rnd Variable Capacity Magazine For WE06 is constructed with a high-density polymer shell and steel baseplate and is compatible with both variants of the WE06, but is not compatible with ARCTURUS PP-19 or PPK-20 variants. 

This is an adjustable-capacity magazine which allows you to choose between 30rnd and 80rnd capacity by removing the internals from the shell and flicking the switch on the right side. This can be achieved by pushing the detent on the bottom of the mag in and sliding the baseplate off, after which the internals can be removed through the bottom. 

Otherwise, this mag works just like a normal midcap; filled with a speed loader through the fill/feed port at the top, with no battle rattle giving you away thanks to its spring-loaded internals. Whether it is the impressive Standard version or the insane Advanced version, you'll need quite a few of these to do this fantastic platform justice!

Constructed from heavy duty polymer, the most apparent and eye-catching feature of this magazine is the transparent side panels showcasing the 9 red and gold mock shotgun shells within. that adds to the realistic aesthetic.

The magazine itself holds 100 rounds and is a mid-cap magazine and is loaded from the top using a speed loader. It being a mid-cap design also means that there is no 'battle rattle' from loose BBs or wheel winding as you would get in a high-cap magazine. The external of the magazine also features a raised ridge pattern for ease of use and provides extra grip even when wearing gloves.

This magazine is compatible with the CYMA CM.102, but may potentially fit other replicas, although please note that this has not been tested.

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours. 

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard! 

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

A metal constructed magazine for the LCT branded LCK47 series of Airsoft Electric Gun which holds a total of 130rnds and feeds BBs into the gun via a spring until completely empty. It features a Steel shell for enhanced realism and is designed around the traditional Waffle style 7.62x39mm magazines for the AK. We recommend the use of a Speedloader to fill this magazine.

A replacement magazine for Airsoft AK47 / 74 AEG, which are based off Tokyo Marui Style designs, such as the CYMA AEG.

Looking for mags for your MP18? The Snow Wolf 130rnd Mid-cap Magazine should do the trick! This magazine is made from hefty and substantial steel with polymer internals and a steel feed spring. To load the magazine all you need to do is fill it from the top using a standard Airsoft speed loader or loading rod.

Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

If you run a G3 platform AEG and you need mags with no rattle and decent capacity, Fuxing has you covered! This magazine is constructed with a steel shell and polymer internals and is a copy of the most common G3 magazine style seen in the real steel world. The externals include an over-insertion stop on each side and reinforcing ribs giving it a realistic look, and on the inside this is a spring-loaded mid-cap mag, meaning no battle rattle as you move!

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speedloader or loading tool and holds a very respectable 150 BBs; more than enough to keep pace with the M4 and AK users. These mags should fit any Tokyo Marui clone G3 AEG platform, including the G3A3, G3A4, G3 SAS, MC51 and PSG1. Compatibility with the LCT G3 series is yet to be confirmed.

A Polymer constructed magazine for G&G TR16 MBR .308 series of Airsoft Electric Guns, which has an elongated follower to activate the Bolt-Stop function of the replica and is a beautiful. easy-to-handle design. It is easily loaded using a Speedloader to force BBs into the entrance, holding a total of 100rnds and effortlessly feeding them into your rifle until it is completely empty.

A 115rnd Mid-Cap (Medium Capacity) Magazine for the G&G branded AK Platform Replicas, such as the RK74 series. The Magazine is filled from the top using a Speedloader, and features a smoked / transparent outer shell. Being a Mid-Cap Magazine this will feed until it is empty, without rattling like a High-Cap. It even has the Elongated Follower featured in the OEM Mags, to make sure you're using every last BB in the mag. If you own an RK74 series AEG and want to carry more ammunition in the field, the stock up today.

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

An Electric Box Magazine for M249 Support / Light Machine Guns, that holds a total of 1500rnds and is powered by an included Rechargeable Battery. The Magazine has a variety of options and can be operated using an included Pressure Pad, can be set to wind constantly, and there is also a 'Sound Control' mode. This mode will only wind the Magazine when it can hear the Gun firing, which is the mode you'll most likely end up using. Included in the box is a Rechargeable Battery and Charger. All you need to do is charge the Battery, install it in the Magazine, pour your BBs in and set the winding mode you want to use. Easy as that.

One of the best things about the Jing Gong LK58 Airsoft AEG series is its massive capacity yet short in length magazines, packing 500 rounds into a magazine that will still allow you to keep low in the woods and avoid getting hit. The LK58's 500rnd high-cap magazine is now available as a spare, meaning you can now rock a 1000 BB loadout with only two magazines!

This magazine is constructed with a steel shell and polymer internals and is a wheel or key wound high capacity magazine. The winding wheel can be found on the base plate, and for faster winding, the magazine can also be wound up using the included key, through the winding port on the right side of the magazine body. The fill window is located at the top of the magazine and can be opened by hand. This magazine is designed for the Jing Gong LK58 Airsoft AEG series.