Refine results
Refine by
Viewing 20 of 20.
grid
list
2.49
  • For GATE MOSFETs
  • For MERF 3.2 & ACS
  • Low Resistance Wiring

A programming button designed to give you a bit more control of your GATE MOSFET, which is also compatible with other brands.

17.99
  • Fits Any AEG
  • Ultra Compact
  • Protects Trigger Contact

An ultra compact Generation 3 MOSFET built to be as compact as possible, requiring the smallest amount space possible, and is water resistant. 

23.49
  • 3rd Generation Mosfets
  • Trigger Protecting MOSFET
  • Multifunctional AEG Controller

Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space possible, and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C.

26.99
Was 35.49
Save 8.50
  • USB Link for TITAN and ASTER
  • Program your AEG settings with your phone or PC
  • Compatible with TITAN and ASTER equipped AEG with Deans

If you want to unlock more functionality from your Gate ASTER or TITAN MOSFET, the USB Link from Gate is exactly what you're after! This dongle attaches to your AEGs Deans battery connector and allows you to connect it via micro-USB or USB Type C to your Android device, Windows PC or Mac and control diagnostics, trigger sensitivity, burst modes, rate of fire adjustment and all the other fantastic features built into the ASTER and TITAN ETUs. Unlock the full potential of your Gate TITAN or ASTER and give yourself the edge in battle!

30.49
  • Active Braking
  • Electronic Fuse
  • 3rd Generation Electronics

The NanoAAB MOSFET from Gate Electronics is one of the smallest "plug 'n' play" MOSFETs with Active Braking on the market today.

40.99
  • AEG Controller
  • AEG Protection
  • Huge Improvements

A Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C. 

52.99
  • Plug & Play / Installed
  • 3rnd Burst and ROF Adjuster
  • Programmable Smart Trigger

Generation 3 Micro Computer Programmable Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. 

58.49
  • Programmable MOSFET/ETU
  • Burst mode, binary trigger, pre-cocking
  • Compatible with M4/AR-15 AEG with V2 gearbox

If you are looking for an affordable way to add advanced functionality to your M4/AR-15 AEG, this is worth a look! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox replaces your conventional trigger assembly and offers burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

64.49
  • Bluetooth 5.0
  • Connects to GCS App
  • Gives Protection/Telemetry

The Gate Titan Blu-Link allows for wireless management and connectivity to your Airsoft Gun. By connecting the Blu-Link in series to your Titan and/or ASTER, you will be able to control all aspects of your favourite MOSFET remotely from your Android or iOS device; with support eventually coming for Windows and macOS. This device can be left plugged into your Gun, and there is no need to remove it for skirmish, allowing you to make changes and program settings on the go.

64.59
Was 75.99
Save 11.40
  • Complete switch assembly
  • Includes KRYTAC MOSFET
  • Pre-wired and ready to install

If you are experiencing issues with semi-automatic as your AEG gets older, the likelihood is your switch assembly/trigger contacts have become corroded and need replacing. Fortunately KRYTAC are here to provide a complete pre-wired switch assembly, complete with their in-line MOSFET which provides protection to the circuitry and prevents the AEG from firing if the battery voltage drops too low. The assembly comprises of the trigger contacts, MOSFET, automotive fuse, male Deans connector, and spade connectors, all wired together and ready to go once installed.

81.99
  • Highly Programable
  • Very Easy To Program
  • Connectors & Wire Inc.

A complete unit to fit into any Airsoft AEG no matter what version gearbox you own. Included is everything from MOSFET to wiring, connectors and programming card.

128.99
  • Bluetooth 5.2/GCS app
  • Built-in voltage boost converter
  • Ultra-precise telemetry measurements

Turn your AEG into a TITAN with Gate's new flagship electric trigger unit (ETU), the TITAN II Bluetooth for Rear Wired V2 Gearbox with Basic Firmware.

Built-in Bluetooth 5.2 technology gives you direct access to the TITAN's settings on the fly, using AEG telemetry to allow you to use your smartwatch, STATUS and other future devices in the Gate ecosystem of devices.

The innovative gear sensor not only counts each tooth but also as the first in the world determines the direction of a gear's rotation, offering you the most precise of cycle controls in AEGs.

With mind-blowing optical trigger sensor, the TITAN II allows you  to set your hair trigger with ludicrous precision, with a whopping 50 sensitivity levels for the first millimetre of trigger movement.

The TITAN II is equipped with a multifunctional port ready for connecting additional accessories such as bolt-catch, magazine sensor, tracer in hop-up chamber and others.

147.49
  • Trigger Replacement
  • Optical Trigger Adjust
  • Highly Advanced System

A drop in MOSFET Kit designed for Rear Wired Version 2 Gearbox, which are typically seen in M4 Variant Rifles. This variation of the Kit comes with the MOSFET Unit and the USB-Link. This light version of the kit does not include the tactical programming card.

147.49
  • Trigger Replacement
  • Optical Trigger Adjust
  • Highly Advanced System

A drop in MOSFET Kit designed for Rear Wired Version 2 Gearbox, which are typically seen in M4 Variant Rifles. This variation of the Kit comes with the MOSFET Unit and the USB-Link. This light version of the kit does not include the tactical programming card.

186.99
  • Complete TITAN Kit
  • Trigger Replacement
  • For NGRS Recoil System

A drop in MOSFET Kit designed for Tokyo Marui NGRS Recoil Shock Systems, such as the NGRS M4, and the NGRS SCAR. This variation of the Kit comes with the MOSFET Unit, the USB-Link, and is the Advanced version with unlocked features.

29.49
  • MOSFET & Wiring
  • Replacement original parts
  • For version 2 gearbox equipped AEGs

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox; Front Wired is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and is set up for front-wired AEGs. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

52.99
  • Silver Wiring
  • Replacement Kit
  • Upgrade EFCS Board

A replacement or upgrade circuit board for the ARES Amoeba EFCS gearbox system.

99.49
  • Programmable Trigger
  • 'Speed Trigger' Included
  • For Version 2 Rear Wired

A drop-in trigger, ETU & MOSFET for Version 2 compatible rear-wired Airsoft replicas, which includes features like a programmable trigger, low battery cutoff, shot sensor and comes included with a vertical 'speed trigger'.

99.49
  • Complete pre-wired ETU and MOSFET
  • For Airsoft AEGs with Version 2 gearbox
  • Provides battery protection and programmable fire controls

So you want a MOSFET in your Airsoft gun, but you aren't a fan of soldering? G&G have just the thing! The ETU 2.0 and MOSFET 3.0 from G&G come as a pre-wired set which can be (relatively) easily installed into any version 2 AEG gearbox, with no need to solder! The set comes wired for rear wired AEGs and includes a mini-Tamiya battery connector and automotive fuse. This MOSFET is the same as that used in the G&G advanced series, and provides low voltage cut-off to protect your battery, and allows for programmable fire modes using the controls on the AEG itself!

137.49
  • Trigger Replacement
  • Complete V3 TITAN Kit
  • Highly Advanced System

A drop in MOSFET Kit designed for Version 3 Gearbox, which are typically seen in AK and RPK Variant Rifles.

About Our Airsoft MOSFETS

An Airsoft MOSFET is an internal attachment that directs electricity from your gun’s battery straight to the motor, diverting current away from your trigger and therefore preventing any wear and tear. As a result, the MOSFET improves your gun’s rate of fire, performance and lifespan.

Many Airsoft MOSFETs offer additional features too. Some simply offer active braking (this prevents overspin from the gears) whereas some go as far as to offer a rate of fire control, trigger delay, burst fire and much, much more.

Our selection includes some of the top brands on the Airsoft market, such as GATE, including the popular-for-good-reason Gate WARFET MOSFET. Investing in a gate MOSFET is a must-have for improving your Airsoft performance in game. Plus, with pieces like the Gate MOSFET switch controller, the insulated gate works to protect the wiring within your Airsoft gun. 

Get your new AEG MOSFET from Gate Electronics, Ares and more today and take your Airsoft gun to the next level.