- For AK AEG / GBB
- Fits onto Side Mount
- Quick Release Design
A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate.
- CNC Aluminium construction
- Short or Long versions are available
- Optics mount for SSP5 and SSP5 6" GBB
If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.
The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!
- CNC Aluminium construction
- Short or Long versions are available
- Optics mount for SSP5 and SSP5 6" GBB
If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.
The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!
- 6 Bolt Securing
- 30mm Diameter Tubing
- 20mm RIS/Picatiny Compatible
The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming.
- Steel Construction
- Includes mounting plates
- Correct mount for Rifle No.4 MK1(T) Sniper rifle
If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!
- Alloy construction
- Provides a 20mm Picatinny rail
- For CYMA CM.039 & CM.039C Only
If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself.
- Harris lug
- Attaches via M-LOK
- Aluminium construction
Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.
- Raised magnifier mount
- Co-witnesses with "Unity" style riser mounts
- Push down/up to stow/deploy
If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling.
- QD sling socket & D-ring
- For Tokyo Marui P90 & clones
- Aluminium construction
If you need something to dangle your P90 from while you do more important work, this sling point will do it! The Laylax Sling Mount w/QD Socket for P90 AEG is compatible with the Tokyo Marui P90 and clones of the TM design, allowing you to use either a QD sling swivel or a conventional hook sling to carry your pride and joy.
The QD sling mount is constructed from aluminium and the D-ring is high density polymer, with the complete system mounting with a robust rubberised fabric strap. This setup is a major advancement over older P90 sling mounting apparatus, and if you like your lil spacegun at the cutting edge, this is essential!
- Steel construction
- 2 Piece 20mm Picatinny mount
- Requires holes to be drilled in the receiver - Advanced users only!
The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.
- One Piece Mount
- For 30mm Optics
- VIP Lifetime Warranty
This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.
- Rail Riser
- 3.1cm Raise
- 20mm RIS/RAS
This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.
- Compact
- 1" Riser Mount
- For Lower Face Users
A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.
- Replaces Rear Sight
- Sight Mount Plate
- For Red Dot Sight
A mounting plate designed to fit to allow the attachment of backup and red dot sights to TM based Hi-Capa 5.1 pistols. The plate attaches to the pistol by replacing the rear sight, and using the existing screws secures into place. The backup sight plate is constructed from lightweight yet durable 6061-T6 Aluminium Alloy and secures your sight securely to your pistol.
This mount is perfect for those Airsoft skirmishers who are looking to attach a red dot or backup sight to their pistol in order to make more accurate and quicker snap shots to get an advantage whilst playing.
- Steel Construction
- Push button release
- Fits QD sling sockets
A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!
- Steel construction
- Provides sling loops on both sides
- For M4/AR-15 AEG Series
If you need to mount a sling to your M4/AR-15 AEG, CYMA has just the thing! The Steel Ambidextrous Sling Plate for M4/AR-15 AEG is designed to mount between the buffer tube and receiver and should fit the vast majority of M4/AR-15 AEGs from various brands (Not BOLT, TM NGRS or GBBRs).
The plate is constructed from steel to provide ample strength to support even the heaviest of ARs and provides a sling loop on either side so you can set up your sling for either left or right-handed use. The sling loops should be compatible with most "hook" type slings and can be paired with a front sling point if you prefer a two-point sling setup.
- Easy to Fit
- For M4 AEG
- Curved Loops
A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on AEG Electric Rifles between the Receiver and the Buffer tube allowing the attachment of Slings.
- Low Profile Rings
- For 25mm Optics
- Fits 20mm RIS/RAS
A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.
- Alloy construction with steel bolt
- For 20mm Picatinny rails
- Riser mount - Raise your optic by 1-inch
Having trouble getting a good view down your red dot sight when wearing full-face protection? A riser mount is what you need! This riser mount attaches to any 20mm Picatinny rail and provides a raised rail section approximately 4cm long, allowing a low-profile micro red dot sight to be far more visible when using facial protection, helmets and other headgear that might get in the way. The use of a riser mount has the added benefit that it gives you a greater ability to acquire your optic when shooting in unconventional positions and helps encourage a more upright and relaxed shooting stance.
- High rise mount for T1 / T2 Style
- Minimalist aesthetic
- Built in iron sights
The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.
- High rise mount for T1 / T2 Style
- Minimalist aesthetic
- Built in iron sights
The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.
- Compact
- 0.5" Riser Mount
- For Lower Face Users
A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.
- Easy to Fit
- Ambidextrous
- For M4 GBB / PTW
A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on GBB Gas Blowback Rifles between the Receiver and the Buffer tube allowing the attachment of Slings.
- 20mm Mounts
- 1'' Scope Rings
- 6061-T6 Aluminium
A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.
- 20mm Mounts
- 1'' Scope Rings
- 6061-T6 Aluminium
A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.
- 20mm Mounts
- 1'' Scope Rings
- 6061-T6 Aluminium
A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.
- Top / Side Rail
- Claw Mount Style
- For SMG-5 / G3 Guns
A combination 20mm RIS rail sight mount and side 20mm RIS rail adaptor for Airsoft SMG-5 and G3 Style AEGs, which is designed to bolt over the top of the receiver.
- Black In Colour
- Alloy Construction
- Replacement Sling Mount
An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo.
- Fits 20mm Rails
- For 30mm Optics
- High Profile Rings
A set of two High Profile Scope Rings for 30mm Optics, that will easily connect to 20mm RIS/RAS Picatinny Rail Systems. They have a two-piece design which makes installation very easy, and comes included an Alley Key to aid installation. They are High Profile Rings which will hold the Scope higher than standard, making it easier to aim whilst wearing Lower Face Protection.
- For 30mm Optics
- Set of Scope Rings
- Low Profile Mounting
A set of Alloy constructed Scope Rings for 30mm Optics, that has a 20mm Mount on each ring for easy installation to a 20mm RIS/RAS/Picatinny Rail System. They are Low Profile Rings, which will hold your Optic low against your rail rather than reaching for the sky.
About Our Airsoft Mounts
From sling mounts to sight mounts and everything in between, at Patrol Base, we have a range of mounts designed to allow the attachment of different accessories where it may not have been previously possible. That means you can create the custom airsoft gun you’ve been dreaming about, whether you need something to attach your new reflex sight to your airsoft pistol or something compact and tactical, ideal for avid skirmishers that want to stay light on equipment. Most attach easily to our KeyMod and MLOK airsoft rails.