Airsoft Starter Guns Under £129.99

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you're an AK kinda guy but want to stay light on your feet, the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG is your ideal primary! A revamped version of the original SA-J73, the HAL¹ ETU version keeps the best bits and adds some innovative new parts into the mix, with the HAL¹ programmable MOSFET taking centre stage.

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Also added to the updated SA-J73 is a new rotary AK HOP-up unit design, bringing rotary performance to the table to keep pace with ARs! Like the original SA-J73, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

If you're an operator on a budget and need an agile AK with advanced internals, the SA-J73 is exactly that. Rock solid despite its polymer build and kitted out on the inside with goodies you'd never expect at this price, you're in good hands on the field with the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG at your side!

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

A Gas Blowback Airsoft Pistol from NUPROL, this EU-Series RAVEN series EU17 is a semi-automatic pistol which runs on green gas for added realism by simulating recoil by adding blowback to each shot. The pistol is highly customisable and supports a wide range of aftermarket attachments and upgrades allowing you to make the pistol truly your own.

If you love the comfort, reliability and compatibility of the EU-Series pistols, and want something that will stand out from the crowd, then the EU17 is a sure choice. This pistol is one of the most cost-effective sidearms you can run in Airsoft!

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

If you're getting into Airsoft on a tight budget and you're an AK fan, the CYMA CM.520 AK-47 Tactical AEG w/ Solid Stock is the perfect starter platform. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easy!

Inside, the CM.520 has a respectable feature set including some important pre-upgraded parts, keeping it competitive on the field despite its entry-level price point. The alloy version 3 gearbox is equipped with steel 18:1 gears running on 7mm steel bushings, a reinforced nylon piston, piston head and cylinder head and a type 0 cylinder, all of which are compatible with aftermarket upgrade parts. The inner barrel is a 6.03mm tightbore example, giving you improved accuracy and higher FPS from the same strength spring, a thoughtful pre-upgrade for long-range effectiveness.

On the outside, the CM.520 is rocking a 20mm Picatinny quad-railed handguard, offering a 20mm rail on top for a red dot sight, another on the bottom for a vertical grip and two short side rails, ideally suited to a tactical flashlight or aiming laser. Just like a real AK, the controls are super simple and easy to master and when paired with its lightweight and agile build, this makes the CM.520 AK-47 Tactical AEG w/ Solid Stock a force to contend with either outdoors or in CQB!

If you're looking to get into the sport of Airsoft and want something ready for the battlefield, this is the perfect beginner rifle for you. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easily!

The alloy version 2 gearbox the CM.507 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

This cheap AEG is a great choice for any player looking to start their Airsoft journey with a budget-friendly option that will have no trouble competing either in CQB or the wide spaces of outdoor sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to make the gun unique and truly yours. Whether this is your first step into the world of Airsoft or if you're a pro looking for a cheap project gun to customise, we are sure you will be impressed with the CM.507!

The UMAEX Elite Force H8R CO2 Revolver is an aggressive and mean looking piece of kit, featuring a modernised .357 style revolver platform and a compensated front end and equipped with 20mm Picatinny rails ready for all your accessories. You better believe the UMAREX H8R means business!

If you're just starting your Airsoft adventure and need a cheap starter replica which can do it all, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ideal. This M4/AR-15 platform AEG is constructed almost entirely from high-density polymer with an alloy outer barrel and trim parts, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.506 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.506 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.506 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with one of Airsoft's most popular platforms, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ready for you!

A non-blowback and gas-powered pistol which you would be forgiven for thinking is of another brand. It is built to a really impressive quality with high-density Polymers that feel great in the hand, with the exact same mind-blowing performance as the original design.

If you are looking for a cost effective starting point to try your hand as an Airsoft sniper, or you need an ultra-lightweight counter sniping solution for those moments you find yourself pinned down, the M52 from Double Eagle would fill the role well. This sniper rifle comes out of the box firing around 380 FPS with a smooth bolt pull, enabling faster follow up shots and making this rifle accessible for those with lower physical strength. The M52 is constructed entirely from lightweight ABS polymer and includes an alloy 20mm Picatinny receiver rail and alloy bolt handle to add rigidity where needed.

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

If you like a fast draw, a speedy slide and race-gun style looks, you'll love the VORSK Hi-Capa 3.8 Vengeance Compact Match Edition. This full metal Hi-Capa GBB combines the shortened 3.8-inch "commander" length slide and barrel with a full size 5.1 style grip, giving you a quicker draw from a holster than bigger 'capas with the same superb ergonomics.

Based on the Hi-Capa 5.1 Vengeance, the 3.8 is ideal for those looking for a compact alternative to their 5.1 Hi-Capa or those seeking a compact pistol with more style and flair than the usual boring Glock 19. If you already own a VORSK or RAVEN Hi-Capa, this little beast uses the same magazines, fits the same holsters and is treated to a 6.03mm tightbore inner barrel, just like its bigger brothers. Whether you are hooked on Hi-Capas or this will be your first, you are well equipped with a VORSK Hi-Capa 3.8 Vengeance!

If you like a fast draw, a speedy slide and race-gun style looks, you'll love the VORSK Hi-Capa 3.8 Vengeance Compact Match Edition. This full metal Hi-Capa GBB combines the shortened 3.8-inch "commander" length slide and barrel with a full size 5.1 style grip, giving you a quicker draw from a holster than bigger 'capas with the same superb ergonomics.

Based on the Hi-Capa 5.1 Vengeance, the 3.8 is ideal for those looking for a compact alternative to their 5.1 Hi-Capa or those seeking a compact pistol with more style and flair than the usual boring Glock 19. If you already own a VORSK or RAVEN Hi-Capa, this little beast uses the same magazines, fits the same holsters and is treated to a 6.03mm tightbore inner barrel, just like its bigger brothers. Whether you are hooked on Hi-Capas or this will be your first, you are well equipped with a VORSK Hi-Capa 3.8 Vengeance!

If you like a fast draw, a speedy slide and race-gun style looks, you'll love the VORSK Hi-Capa 3.8 Vengeance Compact Match Edition. This full metal Hi-Capa GBB combines the shortened 3.8-inch "commander" length slide and barrel with a full size 5.1 style grip, giving you a quicker draw from a holster than bigger 'capas with the same superb ergonomics.

Based on the Hi-Capa 5.1 Vengeance, the 3.8 is ideal for those looking for a compact alternative to their 5.1 Hi-Capa or those seeking a compact pistol with more style and flair than the usual boring Glock 19. If you already own a VORSK or RAVEN Hi-Capa, this little beast uses the same magazines, fits the same holsters and is treated to a 6.03mm tightbore inner barrel, just like its bigger brothers. Whether you are hooked on Hi-Capas or this will be your first, you are well equipped with a VORSK Hi-Capa 3.8 Vengeance!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.

A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.

A Gas Blowback Airsoft Pistol which is based on the EU Series, and offers a tonne of aftermarket features as well as a variety of colours to send you well on your way to having your own custom and unique sidearm.

A Gas Blowback Airsoft Pistol which is based on the EU Series, and offers a tonne of aftermarket features as well as a variety of colours to send you well on your way to having your own custom and unique sidearm.

The Hi-Capa platform has received special treatment from RAVEN, and is now available with an integrated Red Dot Sight which makes for rapid and accurate target acquisition. Coupled with the well-assembled slide and strong recoil spring, you have a Gas Blowback Pistol which is a pure joy to shoot.

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!

A hilarious and awesome little Russian style non-blowback gas powered pistol, which is great as a concealed carry for search and rescue games where you are likely to be searched once captured.