All External Airsoft Parts & Attachments

An Aluminium constructed Suppressor for Airsoft Guns that have a 14mm CCW Male Thread. Ideal for hiding an Inner Barrel Extension or just for adding some tactical cool-factor to your equipment, this Suppressor will attach to 95% of Airsoft Replicas and is the perfect finishing touch to any Custom Gun.

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

If you want to add a grip to your railed AK platform but want to keep it Russian, this is the grip you need! The 5KU Aluminium Russian Compact Foregrip; 20mm Picatinny is constructed from aluminium with a ribbed external design to improve handling and add traction. Inside the grip, we are also treated to a storage compartment designed for CR123a batteries, though you can store other items inside (we use ours for sweets). 

This grip is based on the popular Zco-style vertical grip often seen on styled-up AK platforms with other Zco furniture. If you want to add modern attachments to your railed AK but want to keep it purely Russian, this grip belongs on your gat!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

An Airsoft modular rail panel designed to fit onto KeyMod hand guards, providing a 2'' 20mm RIS / RAS rail. The product comes as a kit and is easily built and can quickly be installed to KeyMod hand guards to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is a perfect purchase for any Airsoft player who has got their hands on a new rifle and is looking to take their gun to the next level by attaching parts and accessories.

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

Keep your WADSN flashlights safe from stray BBs with the WADSN Flashlight Protector. This polymer protector will save the glass lens from shattering under the impact of a BB. It comes in multiple sizes that match the diameter of the different WADSN flashlight lines. Each package includes a clear, translucent diffuser and an IR protective lens, so you can use the best protective lens for your play style.

If you like to dazzle foes, the clear lens is certainly for you. If you are a sneaky player instead and like to operate in pitch black, relying on your night vision setup, then the IR protective lens is the one for you. Save yourself the upset of a broken flashlight and increase its situational versatility with a WADSN Flashlight Protector.

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

Do you like to record your gameplay with a RunCam Scope Cam 2, but you fear a rouge BB may end your influencer lifestyle? Get peace of mind with the RunCam Tempered Glass Protector. This comes as a pack of 2 protectors and is much more likely to withstand the impact of a BB. To apply the Tempered Glass protector to your RunCam, peel off the adhesive cover and then stick the glass to your RunCam's lens. 

Keep saving those amazing skirmish memories, without having to worry about shattered lenses and pick up a RunCam Tempered Glass Protector For Scope Cam 2 for peace of mind on the battlefield.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

Whether you want a slight barrel extension for the perfect look or need extra clearance to mount a tracer or suppressor, the AceTech 1.5" Barrel Extension; 14mm CCW is a handy piece of kit! Made from aluminium and designed to mount to 14mm CCW male barrel threading, this extension offers 14mm CCW male threads at the tip, ready for your choice of muzzle device.

If you're rocking a platform with an outer barrel recessed into the handguard and want to mount a wide suppressor or tracer, this should allow you to do just that, though we recommend measuring up before ordering so you get the length you need. Equally, if you're mimicking a real steel build with an odd-length outer barrel or have a specific look in mind, this could be the key to perfecting your build!

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

If you want the front end your AK Airsoft gun to have the vibe of a medieval war mace, this muzzle brake should do the trick! The CYMA DTK-3 Russian AK Muzzle Brake is constructed from steel and replicates the real Zenitco DTK-3, one of the latest enhancements for the AK platform, straight out of Russia. The brake follows the typical Zenitco aesthetic of pure aggression and combines a large 3-port muzzle brake with a glass breaker front to form one of the most menacing muzzle devices we have seen yet.

The brake is threaded for 24mm CW Russian AK threads and also includes a 14mm CCW male thread adapter, making it compatible with almost any Airsoft AEG or GBBR. If you want your primary to make the enemy team shake in their boots, this is your best shot!

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.