CYMA Airsoft

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

This is for those of you that want to upgrade your AK and make it more up-to date with room for customisation. Constructed from sturdy alloy, the rail system features 4 (quad) rails at the 3, 6, 9 and 12 o clock positions. The top rail offers 3.5 inches of rail real estate with the other 3 rails offering 5 inches to mount tactical equipment.

So if you find yourself wanting more room to customise your AK with more rail space, like the M4s of this world, this is what you're looking for. Designed for CYMA AKS-74U AEGs, but may potentially fit other models of AKS-74U as well. The handguard comes with a mounting device so it can be attached to the barrel and the upper handguard can be left off for those of you that prefer just running a lower.

An electric powered non-blowback Airsoft pistol, also known as an AEP (Automatic Electric Pistol), designed to function and work like the popular Hi-Capa style pistol.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.

This Alloy Suppressor is designed for Airsoft Guns with a 14mm CCW Male Thread, and features Foam Baffles on the inside, supported by a spring core to provide rigidity. The dimpled end cap of the Suppressor can be removed to access the internals. Whether you need to hide an Inner Barrel extension or you just want to add some 'tactical' to your replica, this Suppressor is perfect.

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

Think AK, but bigger! The RPK is everything you love about the iconic AK, except it has been supersized. The CYMA CM.052 RPK-74 AEG is a faithful replica of the Russian support rifle. This AEG looks brilliant and shoots just as wonderfully, this is something that can be observed in all of CYMA's full metal AK platforms.

The CM.052 sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and authentic real wood furniture matching the iconic rifle that was issued to Russian armed forces. The RPK-74 takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45-round style high cap magazine which holds a stupendous 750 BBs!

A unique and imposing Steel constructed muzzle brake for your AR-15/M4/M16 replica, or any other weapon with a 14mm CCW threaded outer barrel.

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

If you have decided to get an AEP for those frosty days where GBBs simply won't work but you have a taste for the finer things in life the CYMA EMG CM.135S Salient Arms BLU AEP would suit you perfectly! This AEP is manufactured by CYMA and licenced by Salient Arms through EMG, and boasts full metal construction and a pre-installed MOSFET to give it an impressive trigger response and rate of fire.

While the slide doesn't cycle, this AEP is no slouch, being equipped with most of the ergonomic upgrades that make the Gas Blowback SAI BLU such a pleasure to shoot and a highly visible red light-enhancing front iron sight paired with an anti-glare rear sight for fast target acquisition. The BLU also has a 14mm CCW male threaded outer barrel protected with the classic Salient Arms style thread protector, meaning, unlike most AEPs, this one is ready for a tracer unit right away! If the plain jane looks of most AEPs have put you off, this stylish and cutting-edge design should seal the deal!

A modernised AK-74 6mm Airsoft AEG Replica, with a ergonomic polymer Hand Guard, Moulded Grip and folding Solid Stock. The Rifle is constructed with an Alloy body, with Polymer Hand Guard, Grip and Stock.

Building a speed demon of an AEG? You will need high speed gears to get the most out of it! The CNC steel High Speed Gearset from CYMA has a 13:1 ratio, which means every 13 motor turns the gearbox will cycle once, which is a step faster than standard 18:1 Airsoft gears. These gears pair perfectly with a high speed motor to provide a demonic rate of fire, as can be seen in the latest upgraded versions of CYMA's Platinum series AEGs. This gearset is designed for use with M120 springs and below only, so should be fine for most UK legal Airsoft AEGs but is not suitable for a DMR rifle with high FPS. This gearset is a version 2/3 set so should work in any AEG with a V2/3 gearbox and many others which share the same gears.

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

If you're running the super cool CYMA CM.136 Grach EBB as your sidearm, this is the place to stow it! The CYMA Retention Holster for CM.136 Grach EBB Pistols is specifically designed for the CYMA CM.136, meaning no worries with compatibility and a flawless fit. This is a retention level 2 holster, meaning it requires the external button to be pressed to draw the pistol which results in greater security than level 1 holsters, ideal for aggressive skirmishers who get stuck right in!

The holster comes pre-fitted with a "paddle" mount attached via the common 30mm toothed rotary interface. The paddle mount fits practically any belt, from wide tactical belts to regular civilian belts and the rotary interface allows you to adjust the draw angle to suit your playstyle and work around anything else you may have on your belt kit. 

A massive advantage of the rotary interface is the wide variety of different wear options it provides, from MOLLE mounts to shoulder harnesses and drop leg panels. No matter how you plan to run your CM.136 Grach EBB, the CYMA Retention Holster is good to go!

If your CM.041 SMG-5 AEG has a worn-out muzzle device perhaps it is time to switch it out for a nice new one. This replacement original part from CYMA should do the trick! The Threaded Tri-Lug Muzzle Device is designed for the CM.041 SMG-5 AEG series and is constructed from aluminium. The device mounts to the front sight assembly of the CM.041 series and provides tri-lug mounting apparatus and 14mm CCW male threads at the tip, protected with a knurled thread protector. Freshen up your old SMG-5 with a new muzzle device!

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

If you want to speed up your shotgun skills, this is a sure fire way to do it! The Cyma Front Fibre Optic Sight simply snap fits onto your barrel to provide a bright red glowing point of aim, without the need for batteries or power at all! This sight can either be used with a rear sight or on its own for up close and personal work.

If you like to keep spare parts on hand, are building a gearbox from scratch or have had a tappet plate failure, CYMA's Tappet Plate for V2 Gearbox is ideal. This tappet plate is designed for version 2 gearboxes and is constructed from polymer. As with all internal parts, we recommend doing your research before attempting to install this tappet plate or consulting a tech who can advise. 

Looking to give your M24 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.702/M24 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

This set is compatible with most M24 sniper rifles based on the Classic Army design but is designed for the CM.702 series, and may need modification and tuning for other M24 platforms.

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.