FMA Airsoft

If you need to carry some extra mags into battle you need this! The FMA Kydex Double Holster for Pistol Magazines fits the most common 9mm and other small magazines. This includes magazines for pistols such as EU/GLOCK, CZ P-09, B9 and F226.

Slide your magazines in the holsters and the polymer retention system will keep them secure. If you're struggling to insert or remove magazines, there is a Phillips head screw in the centre of the holster that can be adjusted to tighten or loosen the magazine insert area.

The holster attaches to belts using the paddle back, it fits on belts with a 2" width or less, meaning it should fit on most common tactical belts. With the FMA Kydex Double Holster for Pistol Magazines you can carry your pistol magazines easily and with style, just make sure to bring enough for the battlefield!

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game!

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game!

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game!

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

A mock PEQ Box, designed to hold PEQ size Airsoft batteries for your AEG weapon enabling easy access and storage for batteries on front wired weapons by mounting onto a 20mm RIS Rail system.

If you're looking for a clean yet effective muzzle attachment, with the added bonus of being a tracer unit as well, then you need the FMA Mod.2 Silencer Tracer Unit! This affordable piece of kit is perfect for tracking your BBs more easily in a dark environment and also for better identifying hits on enemy players.

It has 14mm CCW threads, meaning it attaches to most common Airsoft barrel threads. The unit's shell is constructed from CNC aluminium, making it durable and lightweight. To power the tracer, you will need 3 AAA batteries, these are NOT included with the product. It is activated by pushing the on/off toggle switch located on the user side of the tracer.

Give your Airsoft platform a tactical face-lift, as well as the gameplay benefits of a tracer unit with the FMA Mod.2 Silencer Tracer Unit!

An Alloy and Polymer constructed Anti-Reflection Cover for T1/E1 style Micro Red Dot Sights, which offers protection from BB impacts, as well as eliminating glare on your lens which could give your position away. 

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you like to keep pace with the latest innovations in the real steel world, this belongs on your head! The IHPS Combat Helmet is the US Army's latest issue brain bucket, rocking an innovative boltless suspension design, accessory rails and an NVG mount bracket up front. FMA's replica matches the look and can be kitted out like the real thing, but will only protect you from BBs, not incoming rounds, shrapnel or bricks!

The set includes the helmet itself, a helmet cover in the same colour as the helmet shell, a set of user-configurable internal foam pads and external velcro panels so you can add patches to customise your lid. The helmet cover is a specific design for the IHPS and includes counterweight straps and the rear and velcro on the top, rear and sides. If you like to lead the pack when it comes to the latest replica kit, the IHPS helmet should suit you well!

If you like to keep pace with the latest innovations in the real steel world, this belongs on your head! The IHPS Combat Helmet is the US Army's latest issue brain bucket, rocking an innovative boltless suspension design, accessory rails and an NVG mount bracket up front. FMA's replica matches the look and can be kitted out like the real thing, but will only protect you from BBs, not incoming rounds, shrapnel or bricks!

The set includes the helmet itself, a helmet cover in the same colour as the helmet shell, a set of user-configurable internal foam pads and external velcro panels so you can add patches to customise your lid. The helmet cover is a specific design for the IHPS and includes counterweight straps and the rear and velcro on the top, rear and sides. If you like to lead the pack when it comes to the latest replica kit, the IHPS helmet should suit you well!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

A Pair of Tactical mock Night Vision Goggles with a translucent blue lens for Airsoft fast helmets/helmets with NVG shrouds.

A Polymer constructed set of adaptors for railed helmets, allowing you to install 20mm accessories to your helmet setup.

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If your plate carrier has the "last chicken in the shop" look, a dummy SAPI plate will have it looking just like the real thing. The FMA SAPI Dummy Ballistic Plate for Plate Carriers is designed to fit most Airsoft plate carrier vests, with approximate dimensions of 31.3 x 25.4 x 1.9cm. The set only includes a single plate, so if you need a plate for the front and the rear of your carrier you will need to order two. 

Styled to match real Small Arms Protective Inserts, the FMA Dummy Ballistic Plates are perfect for any plate carrier that likes to crumple up and can really elevate your look in terms of realism. The idea behind polymer dummy plates is that they allow a replica plate carrier to keep an authentic shape without the burden of weighted or real SAPI armour plates. 

An additional perk is that any hits to your plate will be far less painful but still give off a nice loud "thwack" so you know you've been hit. If your plate carrier is looking a bit sad, this should give it the solid look of the real deal!

If you need a set of lightweight iron sights to keep you covered in the event your primary sight goes down, these would work a treat! The FMA Front & Rear Flip-up Sight Set For 20mm Rails are constructed from high density polymer with steel screws and springs, and each sight is spring-loaded for fast and easy deployment when you need them.

The front sight is adjustable using an M4/AR-15 front sight adjustment tool and the rear aperture can be moved left to right without the need for tools via the dial on the right side of the rear sight. The rear sight also offers two different apertures for aiming; a small one for long range shooting and semi-automatic fire, and a larger one for close range, full auto and low light shooting. Deploying the sights is quick and easy, only requiring a press of the button on the left side of each sight, after which they will spring up into position under spring tension.

These sights mount to any 20mm Picatinny rail and are perfect for any Airsoft rifle in need of a slick set of spring-loaded sights to finish it off!

This PVC 3D effect patch is velcro backed, and ideal for placing on Hats, Rigs, Backpacks, or anywhere with a free space of Velcro. The Patch features the M72 LAW (Light Anti-Tank Weapon), which is a portable unguided anti-tank weapon that fires a 66mm dumbfire munition.

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

If you are looking for that last small item to give your helmet/kit setup some added flair, check out the Signal light from FMA. This light can be attached to either velcro or a MOLLE rig and comes complete with a wireless charging kit, MOLLE mount, helmet mount and Velcro.

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

A lightweight and breathable Airsoft half face mask which has fabric sides, allowing you to aim down your sights much easier than with conventional lower face protection.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.