Laylax

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

For those of you looking to customise your VSR, this should be on your list. Laylax bring us a new addition in their 'Precision Sniper System' range. Featuring machined steel construction this reliable trigger benefits from a low profile as a sniper you are likely tend to crawl and stay in the prone position with your cheek to the rifle for extended periods and a reduced safety profile is less likely to get caught accidentally.

With a sleek black design to complement your VSR or G-Spec, it also features a ridged texture on the catch for an increase of grip.

Here we have a stronger, or even replacement lock hook for the KRISS Vector's folding stock. if you want to get ahead of any potential stock lock failure in the future or you're simply the type of rough and ready player that plays hard with your RIF, this would be a worthwhile upgrade for you.

Constructed from duralumin, a strong, lightweight aluminium alloy, which can endure even the most rigorous shooting and movement for performance and peace of mind.

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

If you are upgrading your MPX AEG, a ball bearing spring guide is a great way to reduce stress on the gearbox and spring, and prolong the life of your internals when operating in high-strain setups. The Laylax Ball Bearing Spring Guide is designed for the MPX and is a quick and easy replacement thanks to its quick change functionality.

The spring guide is constructed from steel, which alone will prolong its life considerably, but the ball bearings in its base allow the guide to spin freely and redirect any stress on the gearbox shell, and the spring itself.

The VSR/Bar-10 is still an absurdly popular rifle today, only one problem - No bottom RIS rail! Fear not Laylax have just the thing, a 20mm RIS rail that fits over your front Harris lug. Measuring roughly 9.5cm and just under 4 inches, the rail allows you to attach some much needed tactical equipment to your VSR, such as a bipod for additional sniping stability.

Constructed from tough, but lightweight aluminium, the rail is screws in place to the underside of the fore stock. It also comes with a magazine catch so you can still reload as you normally would. Treat yourself and your VSR to some additional tactical upgrades with a rail mount!

If you need something to dangle your P90 from while you do more important work, this sling point will do it! The Laylax Sling Mount w/QD Socket for P90 AEG is compatible with the Tokyo Marui P90 and clones of the TM design, allowing you to use either a QD sling swivel or a conventional hook sling to carry your pride and joy.

The QD sling mount is constructed from aluminium and the D-ring is high density polymer, with the complete system mounting with a robust rubberised fabric strap. This setup is a major advancement over older P90 sling mounting apparatus, and if you like your lil spacegun at the cutting edge, this is essential!

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

If you want your SigAir MPX even shorter than it comes from the factory this kit will do it! The Laylax Outer Barrel Base & Battery Block Set for SigAir MPX includes a super short outer barrel base and the Laylax Battery Block, allowing you to install a barrel extension or a suppressor which runs beneath the handguard for the integrally suppressed look. 

This part replaces your original outer barrel with an aluminium barrel base measuring 8.5cm overall length, with 4.5cm protruding ahead of the receiver when installed. Also included is the Laylax battery block, designed to keep your battery contained within the handguard when your barrel is pointed down. The battery block won't fit over a suppressor but if you decide to fit a barrel extension it should fit any with a diameter of less than 19mm. 

If you have plans for a head-turner of a Hi-capa build with some serious flair, we have the perfect outer barrel for you! Introducing the Laylax Fluted Outer Barrel, an aluminium replacement for your original outer barrel finished in a beautiful and eye-catching heat gradation look. This outer barrel is compatible with the Tokyo Marui Hi-capa 5.1 GBB pistol and its clones. 

If you are building out your Hi-capa and looking for speed and low weight, the Nineball Custom Grip would be perfect for your build. This grip is constructed entirely from ABS polymer, making it as light as 55 grams of feathers, and has a uniquely aggressive look with its redesigned trigger guard and crackle textured grip panels.

This grip is compatible with most Airsoft Hi-capa GBBs and should be easy to fit given the Hi-capa's modular grip design, making this one of the easiest ways to make your Hi-capa easier to point and less of a burden to carry in game.

Constructed from aluminium, this speed style flat surface trigger is great for quicker trigger manipulation and providing your rifle with the SPEEDQB aesthetic. It also features a ridged front texture for additional handling and grip. Lightweight, with a sweet metallic shine, this trigger is designed for Ares AMOEBA series.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

The bane of most MK23 users is often finding a decent holster for the rather chunky pistol. Fortunately Laylax has focussed their attention on the "snipers best friend", and have provided another option for MK23 users wanting to move away from the fabric universal holsters to something a little more robust and contemporary.

This holster is constructed from reinforced polymer, providing superior retention, with the pistol easily released by pushing the enlarged side button.

With 360 degree adjustability with 24 different positions, detached with a simple push of a button, you can optimise you loadout, depending on your playstyle and stature.

If your AEG shoots hard you may want some hard internal parts to secure its performance in the long term! The Laylax Hard Anti-Reversal Latch for V2/V3 Gearbox is constructed from hardened steel to cope with even the most ferocious build. The set includes the anti-reversal latch itself and the ARL spring and is compatible with all Airsoft AEGs which use the Version 2 or Version 3 gearbox type.

If you are planning on loading up your Kriss Vector with a full complement of tactical equipment, this will be useful! The Laylax Nitro Vo M-LOK Handguard is intended to provide the Krytac Kriss Vector with additional rail space in the form of both Picatinny and M-LOK, and a longer handguard for use with more modern shooting stances. The handguard is constructed from aluminium using CNC processes to provide a flawless shape and keep the weight low, and is coated in a hard wearing black anodised finish. If you are looking for a way to c-clamp your vector without getting in the way of the charging handle, you need this!

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle! 

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle! 

Used by staff and many Airsofters a like to improve your range and accuracy. When combined with the right weight BB, hop-up rubber and patience this barrel delivers killer accuracy down range. 

Used by staff and many Airsofters a like to improve your range and accuracy. When combined with the right weight BB, hop-up rubber and patience this barrel delivers killer accuracy down range.