RIS/RAS Rail & Attachments

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

This lightweight affordable bipod is perfect for those who want to try the sniping or DMR playstyle but haven't got the strength to lug around a metal bipod and a sniper rifle at the same time, don't worry, we get you! The Swiss Arms Folding Bipod For Picatinny Rail is constructed from a lightweight polymer, so lightweight in fact, that you won't even notice it attached to your platform. 

It has rubber feet for superb gripping qualities, mounts to 20mm Picatinny rail via the two screws on the mount and both legs fold upwards so the bipod can sit parallel with your replica when it is not needed on the battlefield. If you're new to the DMR or sniping scene, the Swiss Arms Folding Bipod For Picatinny Rail is an affordable way to get a taster!

This Airsoft bipod is designed to stabilise your rifle whilst shooting from fixed positions. A great attachment for those who like to camp on the high ground and lay waste to anyone who dares try and push them. The quick detach feature is a unique and useful function, meaning if you want to change your playstyle mid-skirmish, simply use the quick detach system and you're ready to go!

The legs have both an adjustable height and position, allowing you to set up the bipod exactly how you need it. It mounts to 20mm Picatinny rails making it perfect for most common Airsoft rifles.

This foregrip has more to it than meets the eye, it features a secret battery compartment for storing an extra accessory battery, or two. It attaches to the common 20mm Picatinny rails, found on most rifles. To mount the grip, unscrew the bottom, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place.

The is an additional cap on the bottom turret that can be removed using a flat head screwdriver. Once this cap is removed it reveals a 10cm deep cavern that can house common batteries such as AAAs or CR123As. This is a unique feature for a foregrip and further maximises the foregrips use as both a comfortable grip and a small storage container.

If you're on board with the ever-growing trend of mounting tactical flashlights to your pistol, get on board with the WADSN X300 Ultra! This aluminium tactical flashlight is based on the real steel SF X300, a high-end tactical flashlight designed for pistols, short-barreled rifles and SMGs. 

With an integral rail mount, loads of alternative mount options, the highly functional SF rocker switch and a stunningly bright CREE-XPG-R5 L.E.D providing 600 Lumens of sparkly goodness for the eyes of the enemy team, this flashlight is a serious force multiplier!

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M640W Scout Light Pro from WADSN is the latest variant of their M6xx scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness, which is only exacerbated by its stroboscopic mode which is intended to distract the enemy and disorient them as you enter the room to clear it!

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you fancy using your pistol as a primary weapon for CQB, a tactical flashlight is a great way to gain an advantage when it comes to clearing rooms and lighting up the enemy in dark areas. The X300 Tactical Pistol Light from WADSN provides a mighty 400 lumens to brighten up the day of the enemy team as you send them back to regen! This flashlight comes with multiple mounting options, including a universal Picatinny and pistol optimised QD mount and a fixed mount for either rail option. 

If you've only got pocket change but want a vertical grip, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is ideal. This ultra-affordable vertical foregrip is styled after the real steel KAC VFG, the iconic design used on US Army M4A1 rifles and G36K platforms used by German KSK. This VFG mounts to any 20mm Picatinny rail and is very easy to mount, requiring not a single tool! 

To mount the grip, unscrew the base, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place. If you're looking for a cost-effective ergonomic enhancement for your 20mm Picatinny rail-equipped platform, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is the one to go for!

If you are in the market for a compact and lightweight flashlight, then look no further! The M300B Scout Light; Single Switch Version is a superb choice for skirmishers who fear what hides in the dark, or more specifically, who may hide in the dark. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms without the need for rail adapters. Keep your operations illuminated with the WADSN M300B Scout Light; Single Switch Version!

If you're seeking a lightweight handguard for your sleeper build, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 is a fine choice. This handguard is styled after the real steel URX 3 handguard and is constructed from high-density polymer, keeping the price and weight to a minimum.

Known as a "mock KeyMod" handguard, the attachment slots on this handguard are not compatible with most KeyMod accessories though you do have the option of mounting 20mm Picatinny accessories to the included rail sections. 3 Rail sections are included and pre-installed but can be repositioned wherever you need them on the attachment slots at 3, 6 and 9 o'clock.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you want the style of a modern KeyMod handguard but not the weight, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 should fit the bill!

This Russian style vertical grip is for those of you that like to hold your rifle the easy way for better stability. The grip features ridged extrusions on the front and back for additional friction and grip, so your hands won't slip.

Constructed from high density polymer, this grip can be mounted to any 20mm Picatinny railed surface, but works best when mounted to a 6 o'clock rail, unless you have an unconventional style! Loosened and tightened by the side nub/bolt to secure in place.

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

A compact and solid Foregrip for 20mm Rail Systems, which is constructed from CNC Aluminium and is based upon a Russian grip design that is most often seen on AK Platforms, but will provide a stable platform for aiming any Rifle that has a 20mm Rail.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you're attached to your optic and don't want to see it get blasted, a Lens Protector is what you need! The Guerilla Tactical Lens Protector for 20mm Picatinny Rails sits in front of your optic to take the impact of a BB so your sight stays safe. The protector can be flipped down for storage or transport and is constructed from a durable Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative rather than buying a whole new optic. If you'd rather replace a cheap lens protector than your favourite scope, the Guerilla Tactical Lens Protector for 20mm Picatinny Rails is essential!

If you're attached to your optic and don't want to see it get blasted, a Lens Protector is what you need! The Guerilla Tactical Lens Protector for 20mm Picatinny Rails sits in front of your optic to take the impact of a BB so your sight stays safe. The protector can be flipped down for storage or transport and is constructed from a durable Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative rather than buying a whole new optic. If you'd rather replace a cheap lens protector than your favourite scope, the Guerilla Tactical Lens Protector for 20mm Picatinny Rails is essential!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you are in the market for a compact lightweight but very effective flashlight, then look no further! The WADSN M300C Scout Light; Dual Switch Version is a superb choice for skirmishers who are afraid of the dark, or at least what may lurk in those dark corners. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms with ease. Keep the future bright and those dark rooms brighter with a WADSN M300C Scout Light; Dual Switch Version!

This alloy-constructed rail adaptor is designed for KeyMod rail systems and provides a short section of 20mm Picatinny Rail. You can diversify your Keymod rail and equip it with six slots of 20mm Picatinny rail, perfect for foregrips or lasers! They are very easy to install to KeyMod Rail Slots using the included Screws, Nuts and Allen Key.

Treat your Keymod handguard to a whole new world of customisation with the Delta Armory Key-Mod 93mm Picatinny Rail Section!